Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-21 18:53:06 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/tqc/tqm834x/tqm834x.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

428 lines
11 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
#include <miiphy.h>
#include <asm/mmu.h>
#include <pci.h>
#include <flash.h>
#include <mtd/cfi_flash.h>
DECLARE_GLOBAL_DATA_PTR;
#define IOSYNC asm("eieio")
#define ISYNC asm("isync")
#define SYNC asm("sync")
#define FPW FLASH_PORT_WIDTH
#define FPWV FLASH_PORT_WIDTHV
#define DDR_MAX_SIZE_PER_CS 0x20000000
#if defined(DDR_CASLAT_20)
#define TIMING_CASLAT TIMING_CFG1_CASLAT_20
#define MODE_CASLAT DDR_MODE_CASLAT_20
#else
#define TIMING_CASLAT TIMING_CFG1_CASLAT_25
#define MODE_CASLAT DDR_MODE_CASLAT_25
#endif
#define INITIAL_CS_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_12 | \
CSCONFIG_COL_BIT_9)
/* External definitions */
ulong flash_get_size (ulong base, int banknum);
/* Local functions */
static int detect_num_flash_banks(void);
static long int get_ddr_bank_size(short cs, long *base);
static void set_cs_bounds(short cs, ulong base, ulong size);
static void set_cs_config(short cs, long config);
static void set_ddr_config(void);
/* Local variable */
static volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
/**************************************************************************
* Board initialzation after relocation to RAM. Used to detect the number
* of Flash banks on TQM834x.
*/
int board_early_init_r (void) {
/* sanity check, IMMARBAR should be mirrored at offset zero of IMMR */
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return 0;
/* detect the number of Flash banks */
return detect_num_flash_banks();
}
/**************************************************************************
* DRAM initalization and size detection
*/
int dram_init(void)
{
long bank_size;
long size;
int cs;
/* during size detection, set up the max DDRLAW size */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE;
im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G);
/* set CS bounds to maximum size */
for(cs = 0; cs < 4; ++cs) {
set_cs_bounds(cs,
CONFIG_SYS_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS),
DDR_MAX_SIZE_PER_CS);
set_cs_config(cs, INITIAL_CS_CONFIG);
}
/* configure ddr controller */
set_ddr_config();
udelay(200);
/* enable DDR controller */
im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN |
SDRAM_CFG_SREN |
SDRAM_CFG_SDRAM_TYPE_DDR1);
SYNC;
/* size detection */
debug("\n");
size = 0;
for(cs = 0; cs < 4; ++cs) {
debug("\nDetecting Bank%d\n", cs);
bank_size = get_ddr_bank_size(cs,
(long *)(CONFIG_SYS_DDR_BASE + size));
size += bank_size;
debug("DDR Bank%d size: %ld MiB\n\n", cs, bank_size >> 20);
/* exit if less than one bank */
if(size < DDR_MAX_SIZE_PER_CS) break;
}
gd->ram_size = size;
return 0;
}
/**************************************************************************
* checkboard()
*/
int checkboard (void)
{
puts("Board: TQM834x\n");
#ifdef CONFIG_PCI
volatile immap_t * immr;
u32 w, f;
immr = (immap_t *)CONFIG_SYS_IMMR;
if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) {
printf("PCI: NOT in host mode..?!\n");
return 0;
}
/* get bus width */
w = 32;
if (immr->reset.rcwh & HRCWH_64_BIT_PCI)
w = 64;
/* get clock */
f = gd->pci_clk;
printf("PCI1: %d bit, %d MHz\n", w, f / 1000000);
#else
printf("PCI: disabled\n");
#endif
return 0;
}
/**************************************************************************
*
* Local functions
*
*************************************************************************/
/**************************************************************************
* Detect the number of flash banks (1 or 2). Store it in
* a global variable tqm834x_num_flash_banks.
* Bank detection code based on the Monitor code.
*/
static int detect_num_flash_banks(void)
{
typedef unsigned long FLASH_PORT_WIDTH;
typedef volatile unsigned long FLASH_PORT_WIDTHV;
FPWV *bank1_base;
FPWV *bank2_base;
FPW bank1_read;
FPW bank2_read;
ulong bank1_size;
ulong bank2_size;
ulong total_size;
cfi_flash_num_flash_banks = 2; /* assume two banks */
/* Get bank 1 and 2 information */
bank1_size = flash_get_size(CONFIG_SYS_FLASH_BASE, 0);
debug("Bank1 size: %lu\n", bank1_size);
bank2_size = flash_get_size(CONFIG_SYS_FLASH_BASE + bank1_size, 1);
debug("Bank2 size: %lu\n", bank2_size);
total_size = bank1_size + bank2_size;
if (bank2_size > 0) {
/* Seems like we've got bank 2, but maybe it's mirrored 1 */
/* Set the base addresses */
bank1_base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
bank2_base = (FPWV *) (CONFIG_SYS_FLASH_BASE + bank1_size);
/* Put bank 2 into CFI command mode and read */
bank2_base[0x55] = 0x00980098;
IOSYNC;
ISYNC;
bank2_read = bank2_base[0x10];
/* Read from bank 1 (it's in read mode) */
bank1_read = bank1_base[0x10];
/* Reset Flash */
bank1_base[0] = 0x00F000F0;
bank2_base[0] = 0x00F000F0;
if (bank2_read == bank1_read) {
/*
* Looks like just one bank, but not sure yet. Let's
* read from bank 2 in autosoelect mode.
*/
bank2_base[0x0555] = 0x00AA00AA;
bank2_base[0x02AA] = 0x00550055;
bank2_base[0x0555] = 0x00900090;
IOSYNC;
ISYNC;
bank2_read = bank2_base[0x10];
/* Read from bank 1 (it's in read mode) */
bank1_read = bank1_base[0x10];
/* Reset Flash */
bank1_base[0] = 0x00F000F0;
bank2_base[0] = 0x00F000F0;
if (bank2_read == bank1_read) {
/*
* In both CFI command and autoselect modes,
* we got the some data reading from Flash.
* There is only one mirrored bank.
*/
cfi_flash_num_flash_banks = 1;
total_size = bank1_size;
}
}
}
debug("Number of flash banks detected: %d\n", cfi_flash_num_flash_banks);
/* set OR0 and BR0 */
set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH |
(-(total_size) & OR_GPCM_AM));
set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) |
(BR_MS_GPCM | BR_PS_32 | BR_V));
return (0);
}
/*************************************************************************
* Detect the size of a ddr bank. Sets CS bounds and CS config accordingly.
*/
static long int get_ddr_bank_size(short cs, long *base)
{
/* This array lists all valid DDR SDRAM configurations, with
* Bank sizes in bytes. (Refer to Table 9-27 in the MPC8349E RM).
* The last entry has to to have size equal 0 and is igonred during
* autodection. Bank sizes must be in increasing order of size
*/
struct {
long row;
long col;
long size;
} conf[] = {
{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_8, 32 << 20},
{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_9, 64 << 20},
{CSCONFIG_ROW_BIT_12, CSCONFIG_COL_BIT_10, 128 << 20},
{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_9, 128 << 20},
{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_10, 256 << 20},
{CSCONFIG_ROW_BIT_13, CSCONFIG_COL_BIT_11, 512 << 20},
{CSCONFIG_ROW_BIT_14, CSCONFIG_COL_BIT_10, 512 << 20},
{CSCONFIG_ROW_BIT_14, CSCONFIG_COL_BIT_11, 1024 << 20},
{0, 0, 0}
};
int i;
int detected;
long size;
detected = -1;
for(i = 0; conf[i].size != 0; ++i) {
/* set sdram bank configuration */
set_cs_config(cs, CSCONFIG_EN | conf[i].col | conf[i].row);
debug("Getting RAM size...\n");
size = get_ram_size(base, DDR_MAX_SIZE_PER_CS);
if((size == conf[i].size) && (i == detected + 1))
detected = i;
debug("Trying %ld x %ld (%ld MiB) at addr %p, detected: %ld MiB\n",
conf[i].row,
conf[i].col,
conf[i].size >> 20,
base,
size >> 20);
}
if(detected == -1){
/* disable empty cs */
debug("\nNo valid configurations for CS%d, disabling...\n", cs);
set_cs_config(cs, 0);
return 0;
}
debug("\nDetected configuration %ld x %ld (%ld MiB) at addr %p\n",
conf[detected].row, conf[detected].col, conf[detected].size >> 20, base);
/* configure cs ro detected params */
set_cs_config(cs, CSCONFIG_EN | conf[detected].row |
conf[detected].col);
set_cs_bounds(cs, (long)base, conf[detected].size);
return(conf[detected].size);
}
/**************************************************************************
* Sets DDR bank CS bounds.
*/
static void set_cs_bounds(short cs, ulong base, ulong size)
{
debug("Setting bounds %08lx, %08lx for cs %d\n", base, size, cs);
if(size == 0){
im->ddr.csbnds[cs].csbnds = 0x00000000;
} else {
im->ddr.csbnds[cs].csbnds =
((base >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
(((base + size - 1) >> CSBNDS_EA_SHIFT) &
CSBNDS_EA);
}
SYNC;
}
/**************************************************************************
* Sets DDR banks CS configuration.
* config == 0x00000000 disables the CS.
*/
static void set_cs_config(short cs, long config)
{
debug("Setting config %08lx for cs %d\n", config, cs);
im->ddr.cs_config[cs] = config;
SYNC;
}
/**************************************************************************
* Sets DDR clocks, timings and configuration.
*/
static void set_ddr_config(void) {
/* clock control */
im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN |
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
SYNC;
/* timing configuration */
im->ddr.timing_cfg_1 =
(4 << TIMING_CFG1_PRETOACT_SHIFT) |
(7 << TIMING_CFG1_ACTTOPRE_SHIFT) |
(4 << TIMING_CFG1_ACTTORW_SHIFT) |
(5 << TIMING_CFG1_REFREC_SHIFT) |
(3 << TIMING_CFG1_WRREC_SHIFT) |
(3 << TIMING_CFG1_ACTTOACT_SHIFT) |
(1 << TIMING_CFG1_WRTORD_SHIFT) |
(TIMING_CFG1_CASLAT & TIMING_CASLAT);
im->ddr.timing_cfg_2 =
TIMING_CFG2_CPO_DEF |
(2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT);
SYNC;
/* don't enable DDR controller yet */
im->ddr.sdram_cfg =
SDRAM_CFG_SREN |
SDRAM_CFG_SDRAM_TYPE_DDR1;
SYNC;
/* Set SDRAM mode */
im->ddr.sdram_mode =
((DDR_MODE_EXT_MODEREG | DDR_MODE_WEAK) <<
SDRAM_MODE_ESD_SHIFT) |
((DDR_MODE_MODEREG | DDR_MODE_BLEN_4) <<
SDRAM_MODE_SD_SHIFT) |
((DDR_MODE_CASLAT << SDRAM_MODE_SD_SHIFT) &
MODE_CASLAT);
SYNC;
/* Set fast SDRAM refresh rate */
im->ddr.sdram_interval =
(DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) |
(DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT);
SYNC;
/* Workaround for DDR6 Erratum
* see MPC8349E Device Errata Rev.8, 2/2006
* This workaround influences the MPC internal "input enables"
* dependent on CAS latency and MPC revision. According to errata
* sheet the internal reserved registers for this workaround are
* not available from revision 2.0 and up.
*/
/* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0
* (0x200)
*/
if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) {
/* There is a internal reserved register at IMMRBAR+0x2F00
* which has to be written with a certain value defined by
* errata sheet.
*/
u32 *reserved_p = (u32 *)((u8 *)im + 0x2f00);
#if defined(DDR_CASLAT_20)
*reserved_p = 0x201c0000;
#else
*reserved_p = 0x202c0000;
#endif
}
}
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif /* CONFIG_PCI */
return 0;
}
#endif /* CONFIG_OF_BOARD_SETUP */
Reference in a new issue View git blame Copy permalink