u-boot/include/configs/rk3288_common.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

81 lines
2.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2015 Google, Inc
*/
#ifndef __CONFIG_RK3288_COMMON_H
#define __CONFIG_RK3288_COMMON_H
#include <asm/arch/hardware.h>
#include "rockchip-common.h"
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
#define CONFIG_SYS_TIMER_BASE 0xff810020 /* TIMER7 */
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
/* Bootrom will load u-boot binary to 0x0 once return from SPL */
#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x00100000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff718000
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
# define CONFIG_SPL_TEXT_BASE 0x0
#else
# define CONFIG_SPL_TEXT_BASE 0xff704000
#endif
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_SDRAM_BASE 0
#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_BANK_SIZE (2UL << 30)
#define SDRAM_MAX_SIZE 0xfe000000
#define CONFIG_SPI_FLASH
#define CONFIG_SF_DEFAULT_SPEED 20000000
#ifndef CONFIG_SPL_BUILD
/* usb otg */
/* usb mass storage */
#define CONFIG_CMD_USB_MASS_STORAGE
/* usb host support */
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x00000000\0" \
"pxefile_addr_r=0x00100000\0" \
"fdt_addr_r=0x01f00000\0" \
"kernel_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x04000000\0"
#include <config_distro_bootcmd.h>
/* Linux fails to load the fdt if it's loaded above 256M on a Rock 2 board, so
* limit the fdt reallocation to that */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x0fffffff\0" \
"initrd_high=0x0fffffff\0" \
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"partitions=" PARTS_DEFAULT \
ENV_MEM_LAYOUT_SETTINGS \
ROCKCHIP_DEVICE_SETTINGS \
BOOTENV
#endif
#define CONFIG_PREBOOT
#endif