mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
0cc11dea89
Switch to an SPL image. The SPL for Ventana does the following: - setup i2c and read the factory programmed EEPROM to obtain DRAM config and model for board-specific calibration data - configure DRAM per CPU/size/layout/devices/calibration - load u-boot.img from NAND and jump to it This allows for a single SPL+u-boot.img to replace the previous multiple boa configurations. Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
83 lines
3.3 KiB
Text
83 lines
3.3 KiB
Text
U-Boot for the Gateworks Ventana Product Family boards
|
|
|
|
This file contains information for the port of U-Boot to the Gateworks
|
|
Ventana Product family boards.
|
|
|
|
1. Secondary Program Loader (SPL)
|
|
---------------------------------
|
|
|
|
The i.MX6 has a BOOT ROM PPL (Primary Program Loader) which supports loading
|
|
an executable image from various boot devices.
|
|
|
|
The Gateworks Ventana board config uses an SPL build configuration. This
|
|
will build the following artifacts from u-boot source:
|
|
- SPL - Secondary Program Loader that the i.MX6 BOOT ROM (Primary Program
|
|
Loader) boots. This detects CPU/DRAM configuration, configures
|
|
The DRAM controller, loads u-boot.img from the detected boot device,
|
|
and jumps to it. As this is booted from the PPL, it has an IVT/DCD
|
|
table.
|
|
- u-boot.img - The main u-boot core which is u-boot.bin with a image header.
|
|
|
|
|
|
2. Build
|
|
--------
|
|
|
|
To build U-Boot for the Gateworks Ventana product family:
|
|
|
|
make gwventana_config
|
|
make
|
|
|
|
|
|
3. Boot source, boot from NAND
|
|
------------------------------
|
|
|
|
The i.MX6 BOOT ROM expects some structures that provide details of NAND layout
|
|
and bad block information (referred to as 'bootstreams') which are replicated
|
|
multiple times in NAND. The number of replications and their spacing (referred
|
|
to as search stride) is configurable through board strapping options and/or
|
|
eFUSE settings (BOOT_SEARCH_COUNT / Pages in block from BOOT_CFG2). In
|
|
addition, the i.MX6 BOOT ROM Flash Configuration Block (FCB) supports two
|
|
copies of a bootloader in flash in the case that a bad block has corrupted one.
|
|
The Freescale 'kobs-ng' application from the Freescale LTIB BSP, which runs
|
|
under Linux and operates on an MTD partition, must be used to program the
|
|
bootstream in order to setup this flash structure correctly.
|
|
|
|
The Gateworks Ventana boards with NAND flash have been factory programmed
|
|
such that their eFUSE settings expect 2 copies of the boostream (this is
|
|
specified by providing kobs-ng with the --search_exponent=1 argument). Once in
|
|
Linux with MTD support for the NAND on /dev/mtd0 you can program the SPL
|
|
with:
|
|
|
|
kobs-ng init -v -x --search_exponent=1 SPL
|
|
|
|
The kobs-ng application uses an imximage which contains the Image Vector Table
|
|
(IVT) and Device Configuration Data (DCD) structures that the i.MX6 BOOT ROM
|
|
requires to boot. The kobs-ng adds the Firmware Configuration Block (FCB) and
|
|
Discovered Bad Block Table (DBBT). The SPL build artifact from u-boot is
|
|
an imximage.
|
|
|
|
The u-boot.img, which is the non SPL u-boot binary appended to a u-boot image
|
|
header must be programmed in the NAND flash boot device at an offset hard
|
|
coded in the SPL. For the Ventana boards, this has been chosen to be 14MB.
|
|
The image can be programmed from either u-boot or Linux:
|
|
|
|
u-boot:
|
|
Ventana > setenv mtdparts mtdparts=nand:14m(spl),2m(uboot),1m(env),-(rootfs)
|
|
Ventana > tftp ${loadaddr} u-boot.img && nand erase.part uboot && \
|
|
nand write ${loadaddr} uboot ${filesize}
|
|
|
|
Linux:
|
|
nandwrite /dev/mtd1 u-boot.img
|
|
|
|
The above assumes the default Ventana partitioning scheme which is configured
|
|
via the mtdparts env var:
|
|
- spl: 14MB
|
|
- uboot: 2M
|
|
- env: 1M
|
|
- rootfs: the rest
|
|
|
|
This information is taken from:
|
|
http://trac.gateworks.com/wiki/ventana/bootloader#NANDFLASH
|
|
|
|
More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual.
|
|
|