mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 12:03:39 +00:00
21a151a79d
The U-Boot port for ST-Ericsson Ux500 is currently only used on the "stemmy" board, where U-Boot runs after firmware that already sets up a boot splash screen. This means that the display is already on and we can just continue using it for U-Boot. Add a simple driver that simplifies this by reading the display configuration (e.g. screen size, bpp) from the hardware registers. It also checks the configured "source synchronization" - for some displays (usually DSI command mode displays) we need to explicitly trigger a software sync. This is done through the video_sync() callback that triggers the sync and wait for completion. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
78 lines
3.1 KiB
Makefile
78 lines
3.1 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# (C) Copyright 2000-2007
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
|
|
ifdef CONFIG_DM
|
|
obj-$(CONFIG_BACKLIGHT) += backlight-uclass.o
|
|
obj-$(CONFIG_BACKLIGHT_GPIO) += backlight_gpio.o
|
|
obj-$(CONFIG_BACKLIGHT_PWM) += pwm_backlight.o
|
|
obj-$(CONFIG_CONSOLE_NORMAL) += console_normal.o
|
|
obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o
|
|
obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
|
|
obj-$(CONFIG_DISPLAY) += display-uclass.o
|
|
obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o
|
|
obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
|
|
obj-$(CONFIG_DM_VIDEO) += video_bmp.o
|
|
obj-$(CONFIG_PANEL) += panel-uclass.o
|
|
obj-$(CONFIG_DM_PANEL_HX8238D) += hx8238d.o
|
|
obj-$(CONFIG_SIMPLE_PANEL) += simple_panel.o
|
|
endif
|
|
|
|
obj-${CONFIG_EXYNOS_FB} += exynos/
|
|
obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/
|
|
obj-${CONFIG_VIDEO_STM32} += stm32/
|
|
obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
|
|
obj-y += ti/
|
|
|
|
obj-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o
|
|
obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
|
|
obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
|
|
obj-$(CONFIG_CFB_CONSOLE) += cfb_console.o
|
|
obj-$(CONFIG_FORMIKE) += formike.o
|
|
obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
|
|
obj-$(CONFIG_IHS_VIDEO_OUT) += ihs_video_out.o
|
|
obj-$(CONFIG_LD9040) += ld9040.o
|
|
obj-$(CONFIG_LG4573) += lg4573.o
|
|
obj-$(CONFIG_LOGICORE_DP_TX) += logicore_dp_tx.o
|
|
obj-$(CONFIG_NXP_TDA19988) += tda19988.o
|
|
obj-$(CONFIG_OSD) += video_osd-uclass.o
|
|
obj-$(CONFIG_PXA_LCD) += pxa_lcd.o
|
|
obj-$(CONFIG_SANDBOX_OSD) += sandbox_osd.o
|
|
obj-$(CONFIG_S6E8AX0) += s6e8ax0.o
|
|
obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
|
|
obj-$(CONFIG_VIDEO_ARM_MALIDP) += mali_dp.o
|
|
obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
|
|
obj-$(CONFIG_VIDEO_BROADWELL_IGD) += broadwell_igd.o
|
|
obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o
|
|
obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
|
|
obj-$(CONFIG_VIDEO_DW_HDMI) += dw_hdmi.o
|
|
obj-$(CONFIG_VIDEO_DW_MIPI_DSI) += dw_mipi_dsi.o
|
|
obj-$(CONFIG_VIDEO_EFI) += efi.o
|
|
obj-$(CONFIG_VIDEO_FSL_DCU_FB) += fsl_dcu_fb.o videomodes.o
|
|
obj-$(CONFIG_VIDEO_IPUV3) += imx/
|
|
obj-$(CONFIG_VIDEO_IVYBRIDGE_IGD) += ivybridge_igd.o
|
|
obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
|
|
obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
|
|
obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
|
|
obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
|
|
obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
|
|
obj-$(CONFIG_VIDEO_LCD_TDO_TL070WSH30) += tdo-tl070wsh30.o
|
|
obj-$(CONFIG_VIDEO_MCDE_SIMPLE) += mcde_simple.o
|
|
obj-${CONFIG_VIDEO_MESON} += meson/
|
|
obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_dsi.o
|
|
obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o
|
|
obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
|
|
obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o
|
|
obj-$(CONFIG_VIDEO_NX) += nexell_display.o videomodes.o nexell/
|
|
obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
|
|
obj-$(CONFIG_VIDEO_DSI_HOST_SANDBOX) += sandbox_dsi_host.o
|
|
obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o
|
|
obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o
|
|
obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o
|
|
obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
|
|
obj-$(CONFIG_VIDEO_VESA) += vesa.o
|
|
obj-$(CONFIG_VIDEO_SEPS525) += seps525.o
|
|
|
|
obj-y += bridge/
|
|
obj-y += sunxi/
|