mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 14:53:06 +00:00
9aa93d8403
USB2.0 Host and OTG controllers in RK3328 are using USB2PHY. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Xavier Drudis Ferran <xdrudis@tinet.cat> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
569 lines
14 KiB
C
569 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Rockchip USB2.0 PHY with Innosilicon IP block driver
|
|
*
|
|
* Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
|
|
* Copyright (C) 2020 Amarula Solutions(India)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <asm/global_data.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <generic-phy.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define usleep_range(a, b) udelay((b))
|
|
#define BIT_WRITEABLE_SHIFT 16
|
|
|
|
enum rockchip_usb2phy_port_id {
|
|
USB2PHY_PORT_OTG,
|
|
USB2PHY_PORT_HOST,
|
|
USB2PHY_NUM_PORTS,
|
|
};
|
|
|
|
struct usb2phy_reg {
|
|
unsigned int offset;
|
|
unsigned int bitend;
|
|
unsigned int bitstart;
|
|
unsigned int disable;
|
|
unsigned int enable;
|
|
};
|
|
|
|
struct rockchip_usb2phy_port_cfg {
|
|
struct usb2phy_reg phy_sus;
|
|
struct usb2phy_reg bvalid_det_en;
|
|
struct usb2phy_reg bvalid_det_st;
|
|
struct usb2phy_reg bvalid_det_clr;
|
|
struct usb2phy_reg ls_det_en;
|
|
struct usb2phy_reg ls_det_st;
|
|
struct usb2phy_reg ls_det_clr;
|
|
struct usb2phy_reg utmi_avalid;
|
|
struct usb2phy_reg utmi_bvalid;
|
|
struct usb2phy_reg utmi_ls;
|
|
struct usb2phy_reg utmi_hstdet;
|
|
};
|
|
|
|
struct rockchip_usb2phy_cfg {
|
|
unsigned int reg;
|
|
struct usb2phy_reg clkout_ctl;
|
|
const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
|
|
};
|
|
|
|
struct rockchip_usb2phy {
|
|
void *reg_base;
|
|
struct clk phyclk;
|
|
const struct rockchip_usb2phy_cfg *phy_cfg;
|
|
};
|
|
|
|
static inline int property_enable(void *reg_base,
|
|
const struct usb2phy_reg *reg, bool en)
|
|
{
|
|
unsigned int val, mask, tmp;
|
|
|
|
tmp = en ? reg->enable : reg->disable;
|
|
mask = GENMASK(reg->bitend, reg->bitstart);
|
|
val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
|
|
|
|
return writel(val, reg_base + reg->offset);
|
|
}
|
|
|
|
static inline bool property_enabled(void *reg_base,
|
|
const struct usb2phy_reg *reg)
|
|
{
|
|
unsigned int tmp, orig;
|
|
unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
|
|
|
|
orig = readl(reg_base + reg->offset);
|
|
|
|
tmp = (orig & mask) >> reg->bitstart;
|
|
return tmp != reg->disable;
|
|
}
|
|
|
|
static const
|
|
struct rockchip_usb2phy_port_cfg *us2phy_get_port(struct phy *phy)
|
|
{
|
|
struct udevice *parent = dev_get_parent(phy->dev);
|
|
struct rockchip_usb2phy *priv = dev_get_priv(parent);
|
|
const struct rockchip_usb2phy_cfg *phy_cfg = priv->phy_cfg;
|
|
|
|
return &phy_cfg->port_cfgs[phy->id];
|
|
}
|
|
|
|
static int rockchip_usb2phy_power_on(struct phy *phy)
|
|
{
|
|
struct udevice *parent = dev_get_parent(phy->dev);
|
|
struct rockchip_usb2phy *priv = dev_get_priv(parent);
|
|
const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
|
|
|
|
property_enable(priv->reg_base, &port_cfg->phy_sus, false);
|
|
|
|
/* waiting for the utmi_clk to become stable */
|
|
usleep_range(1500, 2000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_usb2phy_power_off(struct phy *phy)
|
|
{
|
|
struct udevice *parent = dev_get_parent(phy->dev);
|
|
struct rockchip_usb2phy *priv = dev_get_priv(parent);
|
|
const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
|
|
|
|
property_enable(priv->reg_base, &port_cfg->phy_sus, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_usb2phy_init(struct phy *phy)
|
|
{
|
|
struct udevice *parent = dev_get_parent(phy->dev);
|
|
struct rockchip_usb2phy *priv = dev_get_priv(parent);
|
|
const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
|
|
int ret;
|
|
|
|
ret = clk_enable(&priv->phyclk);
|
|
if (ret && ret != -ENOSYS) {
|
|
dev_err(phy->dev, "failed to enable phyclk (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (phy->id == USB2PHY_PORT_OTG) {
|
|
property_enable(priv->reg_base, &port_cfg->bvalid_det_clr, true);
|
|
property_enable(priv->reg_base, &port_cfg->bvalid_det_en, true);
|
|
} else if (phy->id == USB2PHY_PORT_HOST) {
|
|
property_enable(priv->reg_base, &port_cfg->bvalid_det_clr, true);
|
|
property_enable(priv->reg_base, &port_cfg->bvalid_det_en, true);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_usb2phy_exit(struct phy *phy)
|
|
{
|
|
struct udevice *parent = dev_get_parent(phy->dev);
|
|
struct rockchip_usb2phy *priv = dev_get_priv(parent);
|
|
|
|
clk_disable(&priv->phyclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_usb2phy_of_xlate(struct phy *phy,
|
|
struct ofnode_phandle_args *args)
|
|
{
|
|
const char *name = phy->dev->name;
|
|
|
|
if (!strcasecmp(name, "host-port"))
|
|
phy->id = USB2PHY_PORT_HOST;
|
|
else if (!strcasecmp(name, "otg-port"))
|
|
phy->id = USB2PHY_PORT_OTG;
|
|
else
|
|
dev_err(phy->dev, "improper %s device\n", name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_ops rockchip_usb2phy_ops = {
|
|
.init = rockchip_usb2phy_init,
|
|
.exit = rockchip_usb2phy_exit,
|
|
.power_on = rockchip_usb2phy_power_on,
|
|
.power_off = rockchip_usb2phy_power_off,
|
|
.of_xlate = rockchip_usb2phy_of_xlate,
|
|
};
|
|
|
|
/**
|
|
* round_rate() - Adjust a rate to the exact rate a clock can provide.
|
|
* @clk: The clock to manipulate.
|
|
* @rate: Desidered clock rate in Hz.
|
|
*
|
|
* Return: rounded rate in Hz, or -ve error code.
|
|
*/
|
|
ulong rockchip_usb2phy_clk_round_rate(struct clk *clk, ulong rate)
|
|
{
|
|
return 480000000;
|
|
}
|
|
|
|
/**
|
|
* enable() - Enable a clock.
|
|
* @clk: The clock to manipulate.
|
|
*
|
|
* Return: zero on success, or -ve error code.
|
|
*/
|
|
int rockchip_usb2phy_clk_enable(struct clk *clk)
|
|
{
|
|
struct udevice *parent = dev_get_parent(clk->dev);
|
|
struct rockchip_usb2phy *priv = dev_get_priv(parent);
|
|
const struct rockchip_usb2phy_cfg *phy_cfg = priv->phy_cfg;
|
|
|
|
/* turn on 480m clk output if it is off */
|
|
if (!property_enabled(priv->reg_base, &phy_cfg->clkout_ctl)) {
|
|
property_enable(priv->reg_base, &phy_cfg->clkout_ctl, true);
|
|
|
|
/* waiting for the clk become stable */
|
|
usleep_range(1200, 1300);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* disable() - Disable a clock.
|
|
* @clk: The clock to manipulate.
|
|
*
|
|
* Return: zero on success, or -ve error code.
|
|
*/
|
|
int rockchip_usb2phy_clk_disable(struct clk *clk)
|
|
{
|
|
struct udevice *parent = dev_get_parent(clk->dev);
|
|
struct rockchip_usb2phy *priv = dev_get_priv(parent);
|
|
const struct rockchip_usb2phy_cfg *phy_cfg = priv->phy_cfg;
|
|
|
|
/* turn off 480m clk output */
|
|
property_enable(priv->reg_base, &phy_cfg->clkout_ctl, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clk_ops rockchip_usb2phy_clk_ops = {
|
|
.enable = rockchip_usb2phy_clk_enable,
|
|
.disable = rockchip_usb2phy_clk_disable,
|
|
.round_rate = rockchip_usb2phy_clk_round_rate
|
|
};
|
|
|
|
static int rockchip_usb2phy_probe(struct udevice *dev)
|
|
{
|
|
struct rockchip_usb2phy *priv = dev_get_priv(dev);
|
|
const struct rockchip_usb2phy_cfg *phy_cfgs;
|
|
unsigned int reg;
|
|
int index, ret;
|
|
|
|
priv->reg_base = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
if (IS_ERR(priv->reg_base))
|
|
return PTR_ERR(priv->reg_base);
|
|
|
|
ret = ofnode_read_u32_index(dev_ofnode(dev), "reg", 0, ®);
|
|
if (ret) {
|
|
dev_err(dev, "failed to read reg property (ret = %d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* support address_cells=2 */
|
|
if (dev_read_addr_cells(dev) == 2 && reg == 0) {
|
|
if (ofnode_read_u32_index(dev_ofnode(dev), "reg", 1, ®)) {
|
|
dev_err(dev, "%s must have reg[1]\n",
|
|
ofnode_get_name(dev_ofnode(dev)));
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
phy_cfgs = (const struct rockchip_usb2phy_cfg *)
|
|
dev_get_driver_data(dev);
|
|
if (!phy_cfgs)
|
|
return -EINVAL;
|
|
|
|
/* find out a proper config which can be matched with dt. */
|
|
index = 0;
|
|
do {
|
|
if (phy_cfgs[index].reg == reg) {
|
|
priv->phy_cfg = &phy_cfgs[index];
|
|
break;
|
|
}
|
|
|
|
++index;
|
|
} while (phy_cfgs[index].reg);
|
|
|
|
if (!priv->phy_cfg) {
|
|
dev_err(dev, "failed find proper phy-cfg\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = clk_get_by_name(dev, "phyclk", &priv->phyclk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get the phyclk (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_usb2phy_bind(struct udevice *dev)
|
|
{
|
|
struct udevice *usb2phy_dev;
|
|
ofnode node;
|
|
const char *name;
|
|
int ret = 0;
|
|
|
|
dev_for_each_subnode(node, dev) {
|
|
if (!ofnode_valid(node)) {
|
|
dev_info(dev, "subnode %s not found\n", dev->name);
|
|
ret = -ENXIO;
|
|
goto bind_fail;
|
|
}
|
|
|
|
name = ofnode_get_name(node);
|
|
dev_dbg(dev, "subnode %s\n", name);
|
|
|
|
ret = device_bind_driver_to_node(dev, "rockchip_usb2phy_port",
|
|
name, node, &usb2phy_dev);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"'%s' cannot bind 'rockchip_usb2phy_port'\n", name);
|
|
goto bind_fail;
|
|
}
|
|
}
|
|
|
|
node = dev_ofnode(dev);
|
|
name = "clk_usbphy_480m";
|
|
dev_read_string_index(dev, "clock-output-names", 0, &name);
|
|
|
|
dev_dbg(dev, "clk %s for node %s\n", name, ofnode_get_name(node));
|
|
|
|
ret = device_bind_driver_to_node(dev, "rockchip_usb2phy_clock",
|
|
name, node, &usb2phy_dev);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"'%s' cannot bind 'rockchip_usb2phy_clock'\n", name);
|
|
goto bind_fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
bind_fail:
|
|
device_chld_unbind(dev, NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct rockchip_usb2phy_cfg rk3328_usb2phy_cfgs[] = {
|
|
{
|
|
.reg = 0x100,
|
|
.clkout_ctl = { 0x108, 4, 4, 1, 0 },
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_OTG] = {
|
|
.phy_sus = { 0x0100, 15, 0, 0, 0x1d1 },
|
|
.bvalid_det_en = { 0x0110, 3, 2, 0, 3 },
|
|
.bvalid_det_st = { 0x0114, 3, 2, 0, 3 },
|
|
.bvalid_det_clr = { 0x0118, 3, 2, 0, 3 },
|
|
.ls_det_en = { 0x0110, 0, 0, 0, 1 },
|
|
.ls_det_st = { 0x0114, 0, 0, 0, 1 },
|
|
.ls_det_clr = { 0x0118, 0, 0, 0, 1 },
|
|
.utmi_avalid = { 0x0120, 10, 10, 0, 1 },
|
|
.utmi_bvalid = { 0x0120, 9, 9, 0, 1 },
|
|
.utmi_ls = { 0x0120, 5, 4, 0, 1 },
|
|
},
|
|
[USB2PHY_PORT_HOST] = {
|
|
.phy_sus = { 0x104, 15, 0, 0, 0x1d1 },
|
|
.ls_det_en = { 0x110, 1, 1, 0, 1 },
|
|
.ls_det_st = { 0x114, 1, 1, 0, 1 },
|
|
.ls_det_clr = { 0x118, 1, 1, 0, 1 },
|
|
.utmi_ls = { 0x120, 17, 16, 0, 1 },
|
|
.utmi_hstdet = { 0x120, 19, 19, 0, 1 }
|
|
}
|
|
},
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct rockchip_usb2phy_cfg rk3399_usb2phy_cfgs[] = {
|
|
{
|
|
.reg = 0xe450,
|
|
.clkout_ctl = { 0xe450, 4, 4, 1, 0 },
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_OTG] = {
|
|
.phy_sus = { 0xe454, 1, 0, 2, 1 },
|
|
.bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 },
|
|
.bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 },
|
|
.bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 },
|
|
.utmi_avalid = { 0xe2ac, 7, 7, 0, 1 },
|
|
.utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 },
|
|
},
|
|
[USB2PHY_PORT_HOST] = {
|
|
.phy_sus = { 0xe458, 1, 0, 0x2, 0x1 },
|
|
.ls_det_en = { 0xe3c0, 6, 6, 0, 1 },
|
|
.ls_det_st = { 0xe3e0, 6, 6, 0, 1 },
|
|
.ls_det_clr = { 0xe3d0, 6, 6, 0, 1 },
|
|
.utmi_ls = { 0xe2ac, 22, 21, 0, 1 },
|
|
.utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 }
|
|
}
|
|
},
|
|
},
|
|
{
|
|
.reg = 0xe460,
|
|
.clkout_ctl = { 0xe460, 4, 4, 1, 0 },
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_OTG] = {
|
|
.phy_sus = { 0xe464, 1, 0, 2, 1 },
|
|
.bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 },
|
|
.bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 },
|
|
.bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
|
|
.utmi_avalid = { 0xe2ac, 10, 10, 0, 1 },
|
|
.utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 },
|
|
},
|
|
[USB2PHY_PORT_HOST] = {
|
|
.phy_sus = { 0xe468, 1, 0, 0x2, 0x1 },
|
|
.ls_det_en = { 0xe3c0, 11, 11, 0, 1 },
|
|
.ls_det_st = { 0xe3e0, 11, 11, 0, 1 },
|
|
.ls_det_clr = { 0xe3d0, 11, 11, 0, 1 },
|
|
.utmi_ls = { 0xe2ac, 26, 25, 0, 1 },
|
|
.utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 }
|
|
}
|
|
},
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
|
|
{
|
|
.reg = 0xfe8a0000,
|
|
.clkout_ctl = { 0x0008, 4, 4, 1, 0 },
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_OTG] = {
|
|
.phy_sus = { 0x0000, 8, 0, 0x052, 0x1d1 },
|
|
.bvalid_det_en = { 0x0080, 2, 2, 0, 1 },
|
|
.bvalid_det_st = { 0x0084, 2, 2, 0, 1 },
|
|
.bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
|
|
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
|
|
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
|
|
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
|
|
.utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
|
|
.utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
|
|
.utmi_ls = { 0x00c0, 5, 4, 0, 1 },
|
|
},
|
|
[USB2PHY_PORT_HOST] = {
|
|
.phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
|
|
.ls_det_en = { 0x0080, 1, 1, 0, 1 },
|
|
.ls_det_st = { 0x0084, 1, 1, 0, 1 },
|
|
.ls_det_clr = { 0x0088, 1, 1, 0, 1 },
|
|
.utmi_ls = { 0x00c0, 17, 16, 0, 1 },
|
|
.utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
|
|
}
|
|
},
|
|
},
|
|
{
|
|
.reg = 0xfe8b0000,
|
|
.clkout_ctl = { 0x0008, 4, 4, 1, 0 },
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_OTG] = {
|
|
.phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 },
|
|
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
|
|
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
|
|
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
|
|
.utmi_ls = { 0x00c0, 5, 4, 0, 1 },
|
|
.utmi_hstdet = { 0x00c0, 7, 7, 0, 1 }
|
|
},
|
|
[USB2PHY_PORT_HOST] = {
|
|
.phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
|
|
.ls_det_en = { 0x0080, 1, 1, 0, 1 },
|
|
.ls_det_st = { 0x0084, 1, 1, 0, 1 },
|
|
.ls_det_clr = { 0x0088, 1, 1, 0, 1 },
|
|
.utmi_ls = { 0x00c0, 17, 16, 0, 1 },
|
|
.utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
|
|
}
|
|
},
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
|
|
{
|
|
.reg = 0x0000,
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_OTG] = {
|
|
.phy_sus = { 0x000c, 11, 11, 0, 1 },
|
|
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
|
|
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
|
|
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
|
|
.utmi_ls = { 0x00c0, 10, 9, 0, 1 },
|
|
}
|
|
},
|
|
},
|
|
{
|
|
.reg = 0x4000,
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_OTG] = {
|
|
.phy_sus = { 0x000c, 11, 11, 0, 0 },
|
|
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
|
|
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
|
|
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
|
|
.utmi_ls = { 0x00c0, 10, 9, 0, 1 },
|
|
}
|
|
},
|
|
},
|
|
{
|
|
.reg = 0x8000,
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_HOST] = {
|
|
.phy_sus = { 0x0008, 2, 2, 0, 1 },
|
|
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
|
|
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
|
|
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
|
|
.utmi_ls = { 0x00c0, 10, 9, 0, 1 },
|
|
}
|
|
},
|
|
},
|
|
{
|
|
.reg = 0xc000,
|
|
.port_cfgs = {
|
|
[USB2PHY_PORT_HOST] = {
|
|
.phy_sus = { 0x0008, 2, 2, 0, 1 },
|
|
.ls_det_en = { 0x0080, 0, 0, 0, 1 },
|
|
.ls_det_st = { 0x0084, 0, 0, 0, 1 },
|
|
.ls_det_clr = { 0x0088, 0, 0, 0, 1 },
|
|
.utmi_ls = { 0x00c0, 10, 9, 0, 1 },
|
|
}
|
|
},
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct udevice_id rockchip_usb2phy_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3328-usb2phy",
|
|
.data = (ulong)&rk3328_usb2phy_cfgs,
|
|
},
|
|
{
|
|
.compatible = "rockchip,rk3399-usb2phy",
|
|
.data = (ulong)&rk3399_usb2phy_cfgs,
|
|
},
|
|
{
|
|
.compatible = "rockchip,rk3568-usb2phy",
|
|
.data = (ulong)&rk3568_phy_cfgs,
|
|
},
|
|
{
|
|
.compatible = "rockchip,rk3588-usb2phy",
|
|
.data = (ulong)&rk3588_phy_cfgs,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_usb2phy_port) = {
|
|
.name = "rockchip_usb2phy_port",
|
|
.id = UCLASS_PHY,
|
|
.ops = &rockchip_usb2phy_ops,
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_usb2phy_clock) = {
|
|
.name = "rockchip_usb2phy_clock",
|
|
.id = UCLASS_CLK,
|
|
.ops = &rockchip_usb2phy_clk_ops,
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_usb2phy) = {
|
|
.name = "rockchip_usb2phy",
|
|
.id = UCLASS_PHY,
|
|
.of_match = rockchip_usb2phy_ids,
|
|
.probe = rockchip_usb2phy_probe,
|
|
.bind = rockchip_usb2phy_bind,
|
|
.priv_auto = sizeof(struct rockchip_usb2phy),
|
|
};
|