mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
374 lines
9.5 KiB
C
374 lines
9.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Broadcom PHY drivers
|
|
*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
* author Andy Fleming
|
|
*/
|
|
#include <common.h>
|
|
#include <phy.h>
|
|
#include <linux/delay.h>
|
|
|
|
/* Broadcom BCM54xx -- taken from linux sungem_phy */
|
|
#define MIIM_BCM54xx_AUXCNTL 0x18
|
|
#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) (((val & 0x7) << 12)|(val & 0x7))
|
|
#define MIIM_BCM54xx_AUXSTATUS 0x19
|
|
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
|
|
#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
|
|
|
|
#define MIIM_BCM54XX_SHD 0x1c
|
|
#define MIIM_BCM54XX_SHD_WRITE 0x8000
|
|
#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
|
|
#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
|
|
#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
|
|
(MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
|
|
MIIM_BCM54XX_SHD_DATA(data))
|
|
|
|
#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
|
|
#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
|
|
#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
|
|
#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
|
|
|
|
#define MIIM_BCM_AUXCNTL_SHDWSEL_MISC 0x0007
|
|
#define MIIM_BCM_AUXCNTL_ACTL_SMDSP_EN 0x0800
|
|
|
|
#define MIIM_BCM_CHANNEL_WIDTH 0x2000
|
|
|
|
static void bcm_phy_write_misc(struct phy_device *phydev,
|
|
u16 reg, u16 chl, u16 value)
|
|
{
|
|
int reg_val;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL,
|
|
MIIM_BCM_AUXCNTL_SHDWSEL_MISC);
|
|
|
|
reg_val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL);
|
|
reg_val |= MIIM_BCM_AUXCNTL_ACTL_SMDSP_EN;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg_val);
|
|
|
|
reg_val = (chl * MIIM_BCM_CHANNEL_WIDTH) | reg;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL, reg_val);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA, value);
|
|
}
|
|
|
|
/* Broadcom BCM5461S */
|
|
static int bcm5461_config(struct phy_device *phydev)
|
|
{
|
|
genphy_config_aneg(phydev);
|
|
|
|
phy_reset(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm54xx_parse_status(struct phy_device *phydev)
|
|
{
|
|
unsigned int mii_reg;
|
|
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXSTATUS);
|
|
|
|
switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
|
|
MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
|
|
case 1:
|
|
phydev->duplex = DUPLEX_HALF;
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
case 2:
|
|
phydev->duplex = DUPLEX_FULL;
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
case 3:
|
|
phydev->duplex = DUPLEX_HALF;
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
case 5:
|
|
phydev->duplex = DUPLEX_FULL;
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
case 6:
|
|
phydev->duplex = DUPLEX_HALF;
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
case 7:
|
|
phydev->duplex = DUPLEX_FULL;
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
default:
|
|
printf("Auto-neg error, defaulting to 10BT/HD\n");
|
|
phydev->duplex = DUPLEX_HALF;
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm54xx_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Read the Status (2x to make sure link is right) */
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return bcm54xx_parse_status(phydev);
|
|
}
|
|
|
|
/* Broadcom BCM5482S */
|
|
/*
|
|
* "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
|
|
* circumstances. eg a gigabit TSEC connected to a gigabit switch with
|
|
* a 4-wire ethernet cable. Both ends advertise gigabit, but can't
|
|
* link. "Ethernet@Wirespeed" reduces advertised speed until link
|
|
* can be achieved.
|
|
*/
|
|
static u32 bcm5482_read_wirespeed(struct phy_device *phydev, u32 reg)
|
|
{
|
|
return (phy_read(phydev, MDIO_DEVAD_NONE, reg) & 0x8FFF) | 0x8010;
|
|
}
|
|
|
|
static int bcm5482_config(struct phy_device *phydev)
|
|
{
|
|
unsigned int reg;
|
|
|
|
/* reset the PHY */
|
|
reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
|
|
reg |= BMCR_RESET;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg);
|
|
|
|
/* Setup read from auxilary control shadow register 7 */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL,
|
|
MIIM_BCM54xx_AUXCNTL_ENCODE(7));
|
|
/* Read Misc Control register and or in Ethernet@Wirespeed */
|
|
reg = bcm5482_read_wirespeed(phydev, MIIM_BCM54xx_AUXCNTL);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg);
|
|
|
|
/* Initial config/enable of secondary SerDes interface */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
|
|
MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf));
|
|
/* Write intial value to secondary SerDes Contol */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
|
|
MIIM_BCM54XX_EXP_SEL_SSD | 0);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA,
|
|
BMCR_ANRESTART);
|
|
/* Enable copper/fiber auto-detect */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
|
|
MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201));
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_cygnus_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Read the Status (2x to make sure link is right) */
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_parse_link(phydev);
|
|
}
|
|
|
|
static void bcm_cygnus_afe(struct phy_device *phydev)
|
|
{
|
|
/* ensures smdspclk is enabled */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, 0x0c30);
|
|
|
|
/* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */
|
|
bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8);
|
|
|
|
/* AFE_HPF_TRIM_OTHERS bit11=1, short cascode for all modes*/
|
|
bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803);
|
|
|
|
/* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */
|
|
bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740);
|
|
|
|
/* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */
|
|
bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400);
|
|
|
|
/* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */
|
|
bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004);
|
|
|
|
/* Adjust bias current trim to overcome digital offSet */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1E, 0x02);
|
|
|
|
/* make rcal=100, since rdb default is 000 */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x00B1);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x0010);
|
|
|
|
/* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x00B0);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x0010);
|
|
|
|
/* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x00B0);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x0000);
|
|
}
|
|
|
|
static int bcm_cygnus_config(struct phy_device *phydev)
|
|
{
|
|
genphy_config_aneg(phydev);
|
|
phy_reset(phydev);
|
|
/* AFE settings for PHY stability */
|
|
bcm_cygnus_afe(phydev);
|
|
/* Forcing aneg after applying the AFE settings */
|
|
genphy_restart_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Find out if PHY is in copper or serdes mode by looking at Expansion Reg
|
|
* 0x42 - "Operating Mode Status Register"
|
|
*/
|
|
static int bcm5482_is_serdes(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
int serdes = 0;
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
|
|
MIIM_BCM54XX_EXP_SEL_ER | 0x42);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
|
|
|
|
switch (val & 0x1f) {
|
|
case 0x0d: /* RGMII-to-100Base-FX */
|
|
case 0x0e: /* RGMII-to-SGMII */
|
|
case 0x0f: /* RGMII-to-SerDes */
|
|
case 0x12: /* SGMII-to-SerDes */
|
|
case 0x13: /* SGMII-to-100Base-FX */
|
|
case 0x16: /* SerDes-to-Serdes */
|
|
serdes = 1;
|
|
break;
|
|
case 0x6: /* RGMII-to-Copper */
|
|
case 0x14: /* SGMII-to-Copper */
|
|
case 0x17: /* SerDes-to-Copper */
|
|
break;
|
|
default:
|
|
printf("ERROR, invalid PHY mode (0x%x\n)", val);
|
|
break;
|
|
}
|
|
|
|
return serdes;
|
|
}
|
|
|
|
/*
|
|
* Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
|
|
* Mode Status Register"
|
|
*/
|
|
static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
int i = 0;
|
|
|
|
/* Wait 1s for link - Clause 37 autonegotiation happens very fast */
|
|
while (1) {
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
|
|
MIIM_BCM54XX_EXP_SEL_ER | 0x42);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
|
|
|
|
if (val & 0x8000)
|
|
break;
|
|
|
|
if (i++ > 1000) {
|
|
phydev->link = 0;
|
|
return 1;
|
|
}
|
|
|
|
udelay(1000); /* 1 ms */
|
|
}
|
|
|
|
phydev->link = 1;
|
|
switch ((val >> 13) & 0x3) {
|
|
case (0x00):
|
|
phydev->speed = 10;
|
|
break;
|
|
case (0x01):
|
|
phydev->speed = 100;
|
|
break;
|
|
case (0x02):
|
|
phydev->speed = 1000;
|
|
break;
|
|
}
|
|
|
|
phydev->duplex = (val & 0x1000) == 0x1000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Figure out if BCM5482 is in serdes or copper mode and determine link
|
|
* configuration accordingly
|
|
*/
|
|
static int bcm5482_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
if (bcm5482_is_serdes(phydev)) {
|
|
bcm5482_parse_serdes_sr(phydev);
|
|
phydev->port = PORT_FIBRE;
|
|
return 0;
|
|
}
|
|
|
|
/* Wait for auto-negotiation to complete or fail */
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Parse BCM54xx copper aux status register */
|
|
return bcm54xx_parse_status(phydev);
|
|
}
|
|
|
|
static struct phy_driver BCM5461S_driver = {
|
|
.name = "Broadcom BCM5461S",
|
|
.uid = 0x2060c0,
|
|
.mask = 0xfffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &bcm5461_config,
|
|
.startup = &bcm54xx_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver BCM5464S_driver = {
|
|
.name = "Broadcom BCM5464S",
|
|
.uid = 0x2060b0,
|
|
.mask = 0xfffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &bcm5461_config,
|
|
.startup = &bcm54xx_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver BCM5482S_driver = {
|
|
.name = "Broadcom BCM5482S",
|
|
.uid = 0x143bcb0,
|
|
.mask = 0xffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &bcm5482_config,
|
|
.startup = &bcm5482_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver BCM_CYGNUS_driver = {
|
|
.name = "Broadcom CYGNUS GPHY",
|
|
.uid = 0xae025200,
|
|
.mask = 0xfffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &bcm_cygnus_config,
|
|
.startup = &bcm_cygnus_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
int phy_broadcom_init(void)
|
|
{
|
|
phy_register(&BCM5482S_driver);
|
|
phy_register(&BCM5464S_driver);
|
|
phy_register(&BCM5461S_driver);
|
|
phy_register(&BCM_CYGNUS_driver);
|
|
|
|
return 0;
|
|
}
|