mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
defb184904
Refactor SCU header to use consistent Mask & Shift values. Now, consistently, to read value from SCU register, mask needs to be applied before shift. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
439 lines
11 KiB
C
439 lines
11 KiB
C
/*
|
|
* Copyright (C) 2012-2020 ASPEED Technology Inc.
|
|
*
|
|
* Copyright 2016 Google, Inc
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <ram.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/scu_ast2500.h>
|
|
#include <asm/arch/sdram_ast2500.h>
|
|
#include <asm/arch/wdt.h>
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <dt-bindings/clock/ast2500-scu.h>
|
|
|
|
/* These configuration parameters are taken from Aspeed SDK */
|
|
#define DDR4_MR46_MODE 0x08000000
|
|
#define DDR4_MR5_MODE 0x400
|
|
#define DDR4_MR13_MODE 0x101
|
|
#define DDR4_MR02_MODE 0x410
|
|
#define DDR4_TRFC 0x45457188
|
|
|
|
#define PHY_CFG_SIZE 15
|
|
|
|
static const u32 ddr4_ac_timing[3] = {0x63604e37, 0xe97afa99, 0x00019000};
|
|
static const struct {
|
|
u32 index[PHY_CFG_SIZE];
|
|
u32 value[PHY_CFG_SIZE];
|
|
} ddr4_phy_config = {
|
|
.index = {0, 1, 3, 4, 5, 56, 57, 58, 59, 60, 61, 62, 36, 49, 50},
|
|
.value = {
|
|
0x42492aae, 0x09002000, 0x55e00b0b, 0x20000000, 0x24,
|
|
0x03002900, 0x0e0000a0, 0x000e001c, 0x35b8c106, 0x08080607,
|
|
0x9b000900, 0x0e400a00, 0x00100008, 0x3c183c3c, 0x00631e0e,
|
|
},
|
|
};
|
|
|
|
#define SDRAM_MAX_SIZE (1024 * 1024 * 1024)
|
|
#define SDRAM_MIN_SIZE (128 * 1024 * 1024)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Bandwidth configuration parameters for different SDRAM requests.
|
|
* These are hardcoded settings taken from Aspeed SDK.
|
|
*/
|
|
static const u32 ddr_max_grant_params[4] = {
|
|
0x88448844, 0x24422288, 0x22222222, 0x22222222
|
|
};
|
|
|
|
/*
|
|
* These registers are not documented by Aspeed at all.
|
|
* All writes and reads are taken pretty much as is from SDK.
|
|
*/
|
|
struct ast2500_ddr_phy {
|
|
u32 phy[117];
|
|
};
|
|
|
|
struct dram_info {
|
|
struct ram_info info;
|
|
struct clk ddr_clk;
|
|
struct ast2500_sdrammc_regs *regs;
|
|
struct ast2500_scu *scu;
|
|
struct ast2500_ddr_phy *phy;
|
|
ulong clock_rate;
|
|
};
|
|
|
|
static int ast2500_sdrammc_init_phy(struct ast2500_ddr_phy *phy)
|
|
{
|
|
writel(0, &phy->phy[2]);
|
|
writel(0, &phy->phy[6]);
|
|
writel(0, &phy->phy[8]);
|
|
writel(0, &phy->phy[10]);
|
|
writel(0, &phy->phy[12]);
|
|
writel(0, &phy->phy[42]);
|
|
writel(0, &phy->phy[44]);
|
|
|
|
writel(0x86000000, &phy->phy[16]);
|
|
writel(0x00008600, &phy->phy[17]);
|
|
writel(0x80000000, &phy->phy[18]);
|
|
writel(0x80808080, &phy->phy[19]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ast2500_ddr_phy_init_process(struct dram_info *info)
|
|
{
|
|
struct ast2500_sdrammc_regs *regs = info->regs;
|
|
|
|
writel(0, ®s->phy_ctrl[0]);
|
|
writel(0x4040, &info->phy->phy[51]);
|
|
|
|
writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_INIT, ®s->phy_ctrl[0]);
|
|
while ((readl(®s->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT))
|
|
;
|
|
writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_AUTO_UPDATE,
|
|
®s->phy_ctrl[0]);
|
|
}
|
|
|
|
static void ast2500_sdrammc_set_vref(struct dram_info *info, u32 vref)
|
|
{
|
|
writel(0, &info->regs->phy_ctrl[0]);
|
|
writel((vref << 8) | 0x6, &info->phy->phy[48]);
|
|
ast2500_ddr_phy_init_process(info);
|
|
}
|
|
|
|
static int ast2500_ddr_cbr_test(struct dram_info *info)
|
|
{
|
|
struct ast2500_sdrammc_regs *regs = info->regs;
|
|
int i;
|
|
const u32 test_params = SDRAM_TEST_EN
|
|
| SDRAM_TEST_ERRSTOP
|
|
| SDRAM_TEST_TWO_MODES;
|
|
int ret = 0;
|
|
|
|
writel((1 << SDRAM_REFRESH_CYCLES_SHIFT) |
|
|
(0x5c << SDRAM_REFRESH_PERIOD_SHIFT), ®s->refresh_timing);
|
|
writel((0xfff << SDRAM_TEST_LEN_SHIFT), ®s->test_addr);
|
|
writel(0xff00ff00, ®s->test_init_val);
|
|
writel(SDRAM_TEST_EN | (SDRAM_TEST_MODE_RW << SDRAM_TEST_MODE_SHIFT) |
|
|
SDRAM_TEST_ERRSTOP, ®s->ecc_test_ctrl);
|
|
|
|
while (!(readl(®s->ecc_test_ctrl) & SDRAM_TEST_DONE))
|
|
;
|
|
|
|
if (readl(®s->ecc_test_ctrl) & SDRAM_TEST_FAIL) {
|
|
ret = -EIO;
|
|
} else {
|
|
for (i = 0; i <= SDRAM_TEST_GEN_MODE_MASK; ++i) {
|
|
writel((i << SDRAM_TEST_GEN_MODE_SHIFT) | test_params,
|
|
®s->ecc_test_ctrl);
|
|
while (!(readl(®s->ecc_test_ctrl) & SDRAM_TEST_DONE))
|
|
;
|
|
if (readl(®s->ecc_test_ctrl) & SDRAM_TEST_FAIL) {
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
writel(0, ®s->refresh_timing);
|
|
writel(0, ®s->ecc_test_ctrl);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ast2500_sdrammc_ddr4_calibrate_vref(struct dram_info *info)
|
|
{
|
|
int i;
|
|
int vref_min = 0xff;
|
|
int vref_max = 0;
|
|
int range_size = 0;
|
|
|
|
for (i = 1; i < 0x40; ++i) {
|
|
int res;
|
|
|
|
ast2500_sdrammc_set_vref(info, i);
|
|
res = ast2500_ddr_cbr_test(info);
|
|
if (res < 0) {
|
|
if (range_size > 0)
|
|
break;
|
|
} else {
|
|
++range_size;
|
|
vref_min = min(vref_min, i);
|
|
vref_max = max(vref_max, i);
|
|
}
|
|
}
|
|
|
|
/* Pick average setting */
|
|
ast2500_sdrammc_set_vref(info, (vref_min + vref_max + 1) / 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static size_t ast2500_sdrammc_get_vga_mem_size(struct dram_info *info)
|
|
{
|
|
size_t vga_mem_size_base = 8 * 1024 * 1024;
|
|
u32 vga_hwconf = (readl(&info->scu->hwstrap) & SCU_HWSTRAP_VGAMEM_MASK)
|
|
>> SCU_HWSTRAP_VGAMEM_SHIFT;
|
|
|
|
return vga_mem_size_base << vga_hwconf;
|
|
}
|
|
|
|
/*
|
|
* Find out RAM size and save it in dram_info
|
|
*
|
|
* The procedure is taken from Aspeed SDK
|
|
*/
|
|
static void ast2500_sdrammc_calc_size(struct dram_info *info)
|
|
{
|
|
/* The controller supports 128/256/512/1024 MB ram */
|
|
size_t ram_size = SDRAM_MIN_SIZE;
|
|
const int write_test_offset = 0x100000;
|
|
u32 test_pattern = 0xdeadbeef;
|
|
u32 cap_param = SDRAM_CONF_CAP_1024M;
|
|
u32 refresh_timing_param = DDR4_TRFC;
|
|
const u32 write_addr_base = CONFIG_SYS_SDRAM_BASE + write_test_offset;
|
|
|
|
for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
|
|
ram_size >>= 1) {
|
|
writel(test_pattern, write_addr_base + (ram_size >> 1));
|
|
test_pattern = (test_pattern >> 4) | (test_pattern << 28);
|
|
}
|
|
|
|
/* One last write to overwrite all wrapped values */
|
|
writel(test_pattern, write_addr_base);
|
|
|
|
/* Reset the pattern and see which value was really written */
|
|
test_pattern = 0xdeadbeef;
|
|
for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
|
|
ram_size >>= 1) {
|
|
if (readl(write_addr_base + (ram_size >> 1)) == test_pattern)
|
|
break;
|
|
|
|
--cap_param;
|
|
refresh_timing_param >>= 8;
|
|
test_pattern = (test_pattern >> 4) | (test_pattern << 28);
|
|
}
|
|
|
|
clrsetbits_le32(&info->regs->ac_timing[1],
|
|
(SDRAM_AC_TRFC_MASK << SDRAM_AC_TRFC_SHIFT),
|
|
((refresh_timing_param & SDRAM_AC_TRFC_MASK)
|
|
<< SDRAM_AC_TRFC_SHIFT));
|
|
|
|
info->info.base = CONFIG_SYS_SDRAM_BASE;
|
|
info->info.size = ram_size - ast2500_sdrammc_get_vga_mem_size(info);
|
|
clrsetbits_le32(&info->regs->config,
|
|
(SDRAM_CONF_CAP_MASK << SDRAM_CONF_CAP_SHIFT),
|
|
((cap_param & SDRAM_CONF_CAP_MASK)
|
|
<< SDRAM_CONF_CAP_SHIFT));
|
|
}
|
|
|
|
static int ast2500_sdrammc_init_ddr4(struct dram_info *info)
|
|
{
|
|
int i;
|
|
const u32 power_control = SDRAM_PCR_CKE_EN
|
|
| (1 << SDRAM_PCR_CKE_DELAY_SHIFT)
|
|
| (2 << SDRAM_PCR_TCKE_PW_SHIFT)
|
|
| SDRAM_PCR_RESETN_DIS
|
|
| SDRAM_PCR_RGAP_CTRL_EN | SDRAM_PCR_ODT_EN | SDRAM_PCR_ODT_EXT_EN;
|
|
const u32 conf = (SDRAM_CONF_CAP_1024M << SDRAM_CONF_CAP_SHIFT)
|
|
#ifdef CONFIG_DUALX8_RAM
|
|
| SDRAM_CONF_DUALX8
|
|
#endif
|
|
| SDRAM_CONF_SCRAMBLE | SDRAM_CONF_SCRAMBLE_PAT2 | SDRAM_CONF_DDR4;
|
|
int ret;
|
|
|
|
writel(conf, &info->regs->config);
|
|
for (i = 0; i < ARRAY_SIZE(ddr4_ac_timing); ++i)
|
|
writel(ddr4_ac_timing[i], &info->regs->ac_timing[i]);
|
|
|
|
writel(DDR4_MR46_MODE, &info->regs->mr46_mode_setting);
|
|
writel(DDR4_MR5_MODE, &info->regs->mr5_mode_setting);
|
|
writel(DDR4_MR02_MODE, &info->regs->mr02_mode_setting);
|
|
writel(DDR4_MR13_MODE, &info->regs->mr13_mode_setting);
|
|
|
|
for (i = 0; i < PHY_CFG_SIZE; ++i) {
|
|
writel(ddr4_phy_config.value[i],
|
|
&info->phy->phy[ddr4_phy_config.index[i]]);
|
|
}
|
|
|
|
writel(power_control, &info->regs->power_control);
|
|
|
|
ast2500_ddr_phy_init_process(info);
|
|
|
|
ret = ast2500_sdrammc_ddr4_calibrate_vref(info);
|
|
if (ret < 0) {
|
|
debug("Vref calibration failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
writel((1 << SDRAM_REFRESH_CYCLES_SHIFT)
|
|
| SDRAM_REFRESH_ZQCS_EN | (0x2f << SDRAM_REFRESH_PERIOD_SHIFT),
|
|
&info->regs->refresh_timing);
|
|
|
|
setbits_le32(&info->regs->power_control,
|
|
SDRAM_PCR_AUTOPWRDN_EN | SDRAM_PCR_ODT_AUTO_ON);
|
|
|
|
ast2500_sdrammc_calc_size(info);
|
|
|
|
setbits_le32(&info->regs->config, SDRAM_CONF_CACHE_INIT_EN);
|
|
while (!(readl(&info->regs->config) & SDRAM_CONF_CACHE_INIT_DONE))
|
|
;
|
|
setbits_le32(&info->regs->config, SDRAM_CONF_CACHE_EN);
|
|
|
|
writel(SDRAM_MISC_DDR4_TREFRESH, &info->regs->misc_control);
|
|
|
|
/* Enable all requests except video & display */
|
|
writel(SDRAM_REQ_USB20_EHCI1
|
|
| SDRAM_REQ_USB20_EHCI2
|
|
| SDRAM_REQ_CPU
|
|
| SDRAM_REQ_AHB2
|
|
| SDRAM_REQ_AHB
|
|
| SDRAM_REQ_MAC0
|
|
| SDRAM_REQ_MAC1
|
|
| SDRAM_REQ_PCIE
|
|
| SDRAM_REQ_XDMA
|
|
| SDRAM_REQ_ENCRYPTION
|
|
| SDRAM_REQ_VIDEO_FLAG
|
|
| SDRAM_REQ_VIDEO_LOW_PRI_WRITE
|
|
| SDRAM_REQ_2D_RW
|
|
| SDRAM_REQ_MEMCHECK, &info->regs->req_limit_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ast2500_sdrammc_unlock(struct dram_info *info)
|
|
{
|
|
writel(SDRAM_UNLOCK_KEY, &info->regs->protection_key);
|
|
while (!readl(&info->regs->protection_key))
|
|
;
|
|
}
|
|
|
|
static void ast2500_sdrammc_lock(struct dram_info *info)
|
|
{
|
|
writel(~SDRAM_UNLOCK_KEY, &info->regs->protection_key);
|
|
while (readl(&info->regs->protection_key))
|
|
;
|
|
}
|
|
|
|
static int ast2500_sdrammc_probe(struct udevice *dev)
|
|
{
|
|
struct reset_ctl reset_ctl;
|
|
struct dram_info *priv = (struct dram_info *)dev_get_priv(dev);
|
|
struct ast2500_sdrammc_regs *regs = priv->regs;
|
|
int i;
|
|
int ret = clk_get_by_index(dev, 0, &priv->ddr_clk);
|
|
|
|
if (ret) {
|
|
debug("DDR:No CLK\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->scu = ast_get_scu();
|
|
if (IS_ERR(priv->scu)) {
|
|
debug("%s(): can't get SCU\n", __func__);
|
|
return PTR_ERR(priv->scu);
|
|
}
|
|
|
|
clk_set_rate(&priv->ddr_clk, priv->clock_rate);
|
|
ret = reset_get_by_index(dev, 0, &reset_ctl);
|
|
if (ret) {
|
|
debug("%s(): Failed to get reset signal\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_assert(&reset_ctl);
|
|
if (ret) {
|
|
debug("%s(): SDRAM reset failed: %u\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ast2500_sdrammc_unlock(priv);
|
|
|
|
writel(SDRAM_PCR_MREQI_DIS | SDRAM_PCR_RESETN_DIS,
|
|
®s->power_control);
|
|
writel(SDRAM_VIDEO_UNLOCK_KEY, ®s->gm_protection_key);
|
|
|
|
/* Mask all requests except CPU and AHB during PHY init */
|
|
writel(~(SDRAM_REQ_CPU | SDRAM_REQ_AHB), ®s->req_limit_mask);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ddr_max_grant_params); ++i)
|
|
writel(ddr_max_grant_params[i], ®s->max_grant_len[i]);
|
|
|
|
setbits_le32(®s->intr_ctrl, SDRAM_ICR_RESET_ALL);
|
|
|
|
ast2500_sdrammc_init_phy(priv->phy);
|
|
if (readl(&priv->scu->hwstrap) & SCU_HWSTRAP_DDR4) {
|
|
ast2500_sdrammc_init_ddr4(priv);
|
|
} else {
|
|
debug("Unsupported DRAM3\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
clrbits_le32(®s->intr_ctrl, SDRAM_ICR_RESET_ALL);
|
|
ast2500_sdrammc_lock(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast2500_sdrammc_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
struct regmap *map;
|
|
int ret;
|
|
|
|
ret = regmap_init_mem(dev, &map);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->regs = regmap_get_range(map, 0);
|
|
priv->phy = regmap_get_range(map, 1);
|
|
|
|
priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
|
"clock-frequency", 0);
|
|
|
|
if (!priv->clock_rate) {
|
|
debug("DDR Clock Rate not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast2500_sdrammc_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
*info = priv->info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops ast2500_sdrammc_ops = {
|
|
.get_info = ast2500_sdrammc_get_info,
|
|
};
|
|
|
|
static const struct udevice_id ast2500_sdrammc_ids[] = {
|
|
{ .compatible = "aspeed,ast2500-sdrammc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sdrammc_ast2500) = {
|
|
.name = "aspeed_ast2500_sdrammc",
|
|
.id = UCLASS_RAM,
|
|
.of_match = ast2500_sdrammc_ids,
|
|
.ops = &ast2500_sdrammc_ops,
|
|
.ofdata_to_platdata = ast2500_sdrammc_ofdata_to_platdata,
|
|
.probe = ast2500_sdrammc_probe,
|
|
.priv_auto_alloc_size = sizeof(struct dram_info),
|
|
};
|