mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
0b1284eb52
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
540 lines
14 KiB
C
540 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014 Samsung Electronics
|
|
* Przemyslaw Marczak <p.marczak@samsung.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/power.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <power/pmic.h>
|
|
#include <power/regulator.h>
|
|
#include <power/max77686_pmic.h>
|
|
#include <errno.h>
|
|
#include <mmc.h>
|
|
#include <usb.h>
|
|
#include <usb/dwc2_udc.h>
|
|
#include <samsung/misc.h>
|
|
#include "setup.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_BOARD_TYPES
|
|
/* Odroid board types */
|
|
enum {
|
|
ODROID_TYPE_U3,
|
|
ODROID_TYPE_X2,
|
|
ODROID_TYPES,
|
|
};
|
|
|
|
void set_board_type(void)
|
|
{
|
|
/* Set GPA1 pin 1 to HI - enable XCL205 output */
|
|
writel(XCL205_EN_GPIO_CON_CFG, XCL205_EN_GPIO_CON);
|
|
writel(XCL205_EN_GPIO_DAT_CFG, XCL205_EN_GPIO_CON + 0x4);
|
|
writel(XCL205_EN_GPIO_PUD_CFG, XCL205_EN_GPIO_CON + 0x8);
|
|
writel(XCL205_EN_GPIO_DRV_CFG, XCL205_EN_GPIO_CON + 0xc);
|
|
|
|
/* Set GPC1 pin 2 to IN - check XCL205 output state */
|
|
writel(XCL205_STATE_GPIO_CON_CFG, XCL205_STATE_GPIO_CON);
|
|
writel(XCL205_STATE_GPIO_PUD_CFG, XCL205_STATE_GPIO_CON + 0x8);
|
|
|
|
/* XCL205 - needs some latch time */
|
|
sdelay(200000);
|
|
|
|
/* Check GPC1 pin2 - LED supplied by XCL205 - X2 only */
|
|
if (readl(XCL205_STATE_GPIO_DAT) & (1 << XCL205_STATE_GPIO_PIN))
|
|
gd->board_type = ODROID_TYPE_X2;
|
|
else
|
|
gd->board_type = ODROID_TYPE_U3;
|
|
}
|
|
|
|
void set_board_revision(void)
|
|
{
|
|
/*
|
|
* Revision already set by set_board_type() because it can be
|
|
* executed early.
|
|
*/
|
|
}
|
|
|
|
const char *get_board_type(void)
|
|
{
|
|
const char *board_type[] = {"u3", "x2"};
|
|
|
|
return board_type[gd->board_type];
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SET_DFU_ALT_INFO
|
|
char *get_dfu_alt_system(char *interface, char *devstr)
|
|
{
|
|
return env_get("dfu_alt_system");
|
|
}
|
|
|
|
char *get_dfu_alt_boot(char *interface, char *devstr)
|
|
{
|
|
struct mmc *mmc;
|
|
char *alt_boot;
|
|
int dev_num;
|
|
|
|
dev_num = dectoul(devstr, NULL);
|
|
|
|
mmc = find_mmc_device(dev_num);
|
|
if (!mmc)
|
|
return NULL;
|
|
|
|
if (mmc_init(mmc))
|
|
return NULL;
|
|
|
|
alt_boot = IS_SD(mmc) ? CONFIG_DFU_ALT_BOOT_SD :
|
|
CONFIG_DFU_ALT_BOOT_EMMC;
|
|
|
|
return alt_boot;
|
|
}
|
|
#endif
|
|
|
|
static void board_clock_init(void)
|
|
{
|
|
unsigned int set, clr, clr_src_cpu, clr_pll_con0, clr_src_dmc;
|
|
struct exynos4x12_clock *clk = (struct exynos4x12_clock *)
|
|
samsung_get_base_clock();
|
|
|
|
/*
|
|
* CMU_CPU clocks src to MPLL
|
|
* Bit values: 0 ; 1
|
|
* MUX_APLL_SEL: FIN_PLL ; FOUT_APLL
|
|
* MUX_CORE_SEL: MOUT_APLL ; SCLK_MPLL
|
|
* MUX_HPM_SEL: MOUT_APLL ; SCLK_MPLL_USER_C
|
|
* MUX_MPLL_USER_SEL_C: FIN_PLL ; SCLK_MPLL
|
|
*/
|
|
clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1) |
|
|
MUX_HPM_SEL(1) | MUX_MPLL_USER_SEL_C(1);
|
|
set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1) | MUX_HPM_SEL(1) |
|
|
MUX_MPLL_USER_SEL_C(1);
|
|
|
|
clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
|
|
|
|
/* Wait for mux change */
|
|
while (readl(&clk->mux_stat_cpu) & MUX_STAT_CPU_CHANGING)
|
|
continue;
|
|
|
|
/* Set APLL to 1000MHz */
|
|
clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1);
|
|
set = SDIV(0) | PDIV(3) | MDIV(125) | FSEL(1);
|
|
|
|
clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set);
|
|
|
|
/* Wait for PLL to be locked */
|
|
while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT))
|
|
continue;
|
|
|
|
/* Set CMU_CPU clocks src to APLL */
|
|
set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0) | MUX_HPM_SEL(0) |
|
|
MUX_MPLL_USER_SEL_C(1);
|
|
clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
|
|
|
|
/* Wait for mux change */
|
|
while (readl(&clk->mux_stat_cpu) & MUX_STAT_CPU_CHANGING)
|
|
continue;
|
|
|
|
set = CORE_RATIO(0) | COREM0_RATIO(2) | COREM1_RATIO(5) |
|
|
PERIPH_RATIO(0) | ATB_RATIO(4) | PCLK_DBG_RATIO(1) |
|
|
APLL_RATIO(0) | CORE2_RATIO(0);
|
|
/*
|
|
* Set dividers for MOUTcore = 1000 MHz
|
|
* coreout = MOUT / (ratio + 1) = 1000 MHz (0)
|
|
* corem0 = armclk / (ratio + 1) = 333 MHz (2)
|
|
* corem1 = armclk / (ratio + 1) = 166 MHz (5)
|
|
* periph = armclk / (ratio + 1) = 1000 MHz (0)
|
|
* atbout = MOUT / (ratio + 1) = 200 MHz (4)
|
|
* pclkdbgout = atbout / (ratio + 1) = 100 MHz (1)
|
|
* sclkapll = MOUTapll / (ratio + 1) = 1000 MHz (0)
|
|
* core2out = core_out / (ratio + 1) = 1000 MHz (0) (armclk)
|
|
*/
|
|
clr = CORE_RATIO(7) | COREM0_RATIO(7) | COREM1_RATIO(7) |
|
|
PERIPH_RATIO(7) | ATB_RATIO(7) | PCLK_DBG_RATIO(7) |
|
|
APLL_RATIO(7) | CORE2_RATIO(7);
|
|
|
|
clrsetbits_le32(&clk->div_cpu0, clr, set);
|
|
|
|
/* Wait for divider ready status */
|
|
while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING)
|
|
continue;
|
|
|
|
/*
|
|
* For MOUThpm = 1000 MHz (MOUTapll)
|
|
* doutcopy = MOUThpm / (ratio + 1) = 200 (4)
|
|
* sclkhpm = doutcopy / (ratio + 1) = 200 (4)
|
|
* cores_out = armclk / (ratio + 1) = 200 (4)
|
|
*/
|
|
clr = COPY_RATIO(7) | HPM_RATIO(7) | CORES_RATIO(7);
|
|
set = COPY_RATIO(4) | HPM_RATIO(4) | CORES_RATIO(4);
|
|
|
|
clrsetbits_le32(&clk->div_cpu1, clr, set);
|
|
|
|
/* Wait for divider ready status */
|
|
while (readl(&clk->div_stat_cpu1) & DIV_STAT_CPU1_CHANGING)
|
|
continue;
|
|
|
|
/*
|
|
* Set CMU_DMC clocks src to APLL
|
|
* Bit values: 0 ; 1
|
|
* MUX_C2C_SEL: SCLKMPLL ; SCLKAPLL
|
|
* MUX_DMC_BUS_SEL: SCLKMPLL ; SCLKAPLL
|
|
* MUX_DPHY_SEL: SCLKMPLL ; SCLKAPLL
|
|
* MUX_MPLL_SEL: FINPLL ; MOUT_MPLL_FOUT
|
|
* MUX_PWI_SEL: 0110 (MPLL); 0111 (EPLL); 1000 (VPLL); 0(XXTI)
|
|
* MUX_G2D_ACP0_SEL: SCLKMPLL ; SCLKAPLL
|
|
* MUX_G2D_ACP1_SEL: SCLKEPLL ; SCLKVPLL
|
|
* MUX_G2D_ACP_SEL: OUT_ACP0 ; OUT_ACP1
|
|
*/
|
|
clr_src_dmc = MUX_C2C_SEL(1) | MUX_DMC_BUS_SEL(1) |
|
|
MUX_DPHY_SEL(1) | MUX_MPLL_SEL(1) |
|
|
MUX_PWI_SEL(15) | MUX_G2D_ACP0_SEL(1) |
|
|
MUX_G2D_ACP1_SEL(1) | MUX_G2D_ACP_SEL(1);
|
|
set = MUX_C2C_SEL(1) | MUX_DMC_BUS_SEL(1) | MUX_DPHY_SEL(1) |
|
|
MUX_MPLL_SEL(0) | MUX_PWI_SEL(0) | MUX_G2D_ACP0_SEL(1) |
|
|
MUX_G2D_ACP1_SEL(1) | MUX_G2D_ACP_SEL(1);
|
|
|
|
clrsetbits_le32(&clk->src_dmc, clr_src_dmc, set);
|
|
|
|
/* Wait for mux change */
|
|
while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING)
|
|
continue;
|
|
|
|
/* Set MPLL to 800MHz */
|
|
set = SDIV(0) | PDIV(3) | MDIV(100) | FSEL(0) | PLL_ENABLE(1);
|
|
|
|
clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
|
|
|
|
/* Wait for PLL to be locked */
|
|
while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT))
|
|
continue;
|
|
|
|
/* Switch back CMU_DMC mux */
|
|
set = MUX_C2C_SEL(0) | MUX_DMC_BUS_SEL(0) | MUX_DPHY_SEL(0) |
|
|
MUX_MPLL_SEL(1) | MUX_PWI_SEL(8) | MUX_G2D_ACP0_SEL(0) |
|
|
MUX_G2D_ACP1_SEL(0) | MUX_G2D_ACP_SEL(0);
|
|
|
|
clrsetbits_le32(&clk->src_dmc, clr_src_dmc, set);
|
|
|
|
/* Wait for mux change */
|
|
while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING)
|
|
continue;
|
|
|
|
/* CLK_DIV_DMC0 */
|
|
clr = ACP_RATIO(7) | ACP_PCLK_RATIO(7) | DPHY_RATIO(7) |
|
|
DMC_RATIO(7) | DMCD_RATIO(7) | DMCP_RATIO(7);
|
|
/*
|
|
* For:
|
|
* MOUTdmc = 800 MHz
|
|
* MOUTdphy = 800 MHz
|
|
*
|
|
* aclk_acp = MOUTdmc / (ratio + 1) = 200 (3)
|
|
* pclk_acp = aclk_acp / (ratio + 1) = 100 (1)
|
|
* sclk_dphy = MOUTdphy / (ratio + 1) = 400 (1)
|
|
* sclk_dmc = MOUTdmc / (ratio + 1) = 400 (1)
|
|
* aclk_dmcd = sclk_dmc / (ratio + 1) = 200 (1)
|
|
* aclk_dmcp = aclk_dmcd / (ratio + 1) = 100 (1)
|
|
*/
|
|
set = ACP_RATIO(3) | ACP_PCLK_RATIO(1) | DPHY_RATIO(1) |
|
|
DMC_RATIO(1) | DMCD_RATIO(1) | DMCP_RATIO(1);
|
|
|
|
clrsetbits_le32(&clk->div_dmc0, clr, set);
|
|
|
|
/* Wait for divider ready status */
|
|
while (readl(&clk->div_stat_dmc0) & DIV_STAT_DMC0_CHANGING)
|
|
continue;
|
|
|
|
/* CLK_DIV_DMC1 */
|
|
clr = G2D_ACP_RATIO(15) | C2C_RATIO(7) | PWI_RATIO(15) |
|
|
C2C_ACLK_RATIO(7) | DVSEM_RATIO(127) | DPM_RATIO(127);
|
|
/*
|
|
* For:
|
|
* MOUTg2d = 800 MHz
|
|
* MOUTc2c = 800 Mhz
|
|
* MOUTpwi = 108 MHz
|
|
*
|
|
* sclk_g2d_acp = MOUTg2d / (ratio + 1) = 200 (3)
|
|
* sclk_c2c = MOUTc2c / (ratio + 1) = 400 (1)
|
|
* aclk_c2c = sclk_c2c / (ratio + 1) = 200 (1)
|
|
* sclk_pwi = MOUTpwi / (ratio + 1) = 18 (5)
|
|
*/
|
|
set = G2D_ACP_RATIO(3) | C2C_RATIO(1) | PWI_RATIO(5) |
|
|
C2C_ACLK_RATIO(1) | DVSEM_RATIO(1) | DPM_RATIO(1);
|
|
|
|
clrsetbits_le32(&clk->div_dmc1, clr, set);
|
|
|
|
/* Wait for divider ready status */
|
|
while (readl(&clk->div_stat_dmc1) & DIV_STAT_DMC1_CHANGING)
|
|
continue;
|
|
|
|
/* CLK_SRC_PERIL0 */
|
|
clr = UART0_SEL(15) | UART1_SEL(15) | UART2_SEL(15) |
|
|
UART3_SEL(15) | UART4_SEL(15);
|
|
/*
|
|
* Set CLK_SRC_PERIL0 clocks src to MPLL
|
|
* src values: 0(XXTI); 1(XusbXTI); 2(SCLK_HDMI24M); 3(SCLK_USBPHY0);
|
|
* 5(SCLK_HDMIPHY); 6(SCLK_MPLL_USER_T); 7(SCLK_EPLL);
|
|
* 8(SCLK_VPLL)
|
|
*
|
|
* Set all to SCLK_MPLL_USER_T
|
|
*/
|
|
set = UART0_SEL(6) | UART1_SEL(6) | UART2_SEL(6) | UART3_SEL(6) |
|
|
UART4_SEL(6);
|
|
|
|
clrsetbits_le32(&clk->src_peril0, clr, set);
|
|
|
|
/* CLK_DIV_PERIL0 */
|
|
clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |
|
|
UART3_RATIO(15) | UART4_RATIO(15);
|
|
/*
|
|
* For MOUTuart0-4: 800MHz
|
|
*
|
|
* SCLK_UARTx = MOUTuartX / (ratio + 1) = 100 (7)
|
|
*/
|
|
set = UART0_RATIO(7) | UART1_RATIO(7) | UART2_RATIO(7) |
|
|
UART3_RATIO(7) | UART4_RATIO(7);
|
|
|
|
clrsetbits_le32(&clk->div_peril0, clr, set);
|
|
|
|
while (readl(&clk->div_stat_peril0) & DIV_STAT_PERIL0_CHANGING)
|
|
continue;
|
|
|
|
/* CLK_DIV_FSYS1 */
|
|
clr = MMC0_RATIO(15) | MMC0_PRE_RATIO(255) | MMC1_RATIO(15) |
|
|
MMC1_PRE_RATIO(255);
|
|
/*
|
|
* For MOUTmmc0-3 = 800 MHz (MPLL)
|
|
*
|
|
* DOUTmmc1 = MOUTmmc1 / (ratio + 1) = 100 (7)
|
|
* sclk_mmc1 = DOUTmmc1 / (ratio + 1) = 50 (1)
|
|
* DOUTmmc0 = MOUTmmc0 / (ratio + 1) = 100 (7)
|
|
* sclk_mmc0 = DOUTmmc0 / (ratio + 1) = 50 (1)
|
|
*/
|
|
set = MMC0_RATIO(7) | MMC0_PRE_RATIO(1) | MMC1_RATIO(7) |
|
|
MMC1_PRE_RATIO(1);
|
|
|
|
clrsetbits_le32(&clk->div_fsys1, clr, set);
|
|
|
|
/* Wait for divider ready status */
|
|
while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING)
|
|
continue;
|
|
|
|
/* CLK_DIV_FSYS2 */
|
|
clr = MMC2_RATIO(15) | MMC2_PRE_RATIO(255) | MMC3_RATIO(15) |
|
|
MMC3_PRE_RATIO(255);
|
|
/*
|
|
* For MOUTmmc0-3 = 800 MHz (MPLL)
|
|
*
|
|
* DOUTmmc3 = MOUTmmc3 / (ratio + 1) = 100 (7)
|
|
* sclk_mmc3 = DOUTmmc3 / (ratio + 1) = 50 (1)
|
|
* DOUTmmc2 = MOUTmmc2 / (ratio + 1) = 100 (7)
|
|
* sclk_mmc2 = DOUTmmc2 / (ratio + 1) = 50 (1)
|
|
*/
|
|
set = MMC2_RATIO(7) | MMC2_PRE_RATIO(1) | MMC3_RATIO(7) |
|
|
MMC3_PRE_RATIO(1);
|
|
|
|
clrsetbits_le32(&clk->div_fsys2, clr, set);
|
|
|
|
/* Wait for divider ready status */
|
|
while (readl(&clk->div_stat_fsys2) & DIV_STAT_FSYS2_CHANGING)
|
|
continue;
|
|
|
|
/* CLK_DIV_FSYS3 */
|
|
clr = MMC4_RATIO(15) | MMC4_PRE_RATIO(255);
|
|
/*
|
|
* For MOUTmmc4 = 800 MHz (MPLL)
|
|
*
|
|
* DOUTmmc4 = MOUTmmc4 / (ratio + 1) = 100 (7)
|
|
* sclk_mmc4 = DOUTmmc4 / (ratio + 1) = 100 (0)
|
|
*/
|
|
set = MMC4_RATIO(7) | MMC4_PRE_RATIO(0);
|
|
|
|
clrsetbits_le32(&clk->div_fsys3, clr, set);
|
|
|
|
/* Wait for divider ready status */
|
|
while (readl(&clk->div_stat_fsys3) & DIV_STAT_FSYS3_CHANGING)
|
|
continue;
|
|
|
|
return;
|
|
}
|
|
|
|
static void board_gpio_init(void)
|
|
{
|
|
/* eMMC Reset Pin */
|
|
gpio_request(EXYNOS4X12_GPIO_K12, "eMMC Reset");
|
|
|
|
gpio_cfg_pin(EXYNOS4X12_GPIO_K12, S5P_GPIO_FUNC(0x1));
|
|
gpio_set_pull(EXYNOS4X12_GPIO_K12, S5P_GPIO_PULL_NONE);
|
|
gpio_set_drv(EXYNOS4X12_GPIO_K12, S5P_GPIO_DRV_4X);
|
|
|
|
/* Enable FAN (Odroid U3) */
|
|
gpio_request(EXYNOS4X12_GPIO_D00, "FAN Control");
|
|
|
|
gpio_set_pull(EXYNOS4X12_GPIO_D00, S5P_GPIO_PULL_UP);
|
|
gpio_set_drv(EXYNOS4X12_GPIO_D00, S5P_GPIO_DRV_4X);
|
|
gpio_direction_output(EXYNOS4X12_GPIO_D00, 1);
|
|
|
|
/* OTG Vbus output (Odroid U3+) */
|
|
gpio_request(EXYNOS4X12_GPIO_L20, "OTG Vbus");
|
|
|
|
gpio_set_pull(EXYNOS4X12_GPIO_L20, S5P_GPIO_PULL_NONE);
|
|
gpio_set_drv(EXYNOS4X12_GPIO_L20, S5P_GPIO_DRV_4X);
|
|
gpio_direction_output(EXYNOS4X12_GPIO_L20, 0);
|
|
|
|
/* OTG INT (Odroid U3+) */
|
|
gpio_request(EXYNOS4X12_GPIO_X31, "OTG INT");
|
|
|
|
gpio_set_pull(EXYNOS4X12_GPIO_X31, S5P_GPIO_PULL_UP);
|
|
gpio_set_drv(EXYNOS4X12_GPIO_X31, S5P_GPIO_DRV_4X);
|
|
gpio_direction_input(EXYNOS4X12_GPIO_X31);
|
|
|
|
/* Blue LED (Odroid X2/U2/U3) */
|
|
gpio_request(EXYNOS4X12_GPIO_C10, "Blue LED");
|
|
|
|
gpio_direction_output(EXYNOS4X12_GPIO_C10, 0);
|
|
|
|
#ifdef CONFIG_CMD_USB
|
|
/* USB3503A Reference frequency */
|
|
gpio_request(EXYNOS4X12_GPIO_X30, "USB3503A RefFreq");
|
|
|
|
/* USB3503A Connect */
|
|
gpio_request(EXYNOS4X12_GPIO_X34, "USB3503A Connect");
|
|
|
|
/* USB3503A Reset */
|
|
gpio_request(EXYNOS4X12_GPIO_X35, "USB3503A Reset");
|
|
#endif
|
|
}
|
|
|
|
int exynos_early_init_f(void)
|
|
{
|
|
board_clock_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int exynos_init(void)
|
|
{
|
|
board_gpio_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int exynos_power_init(void)
|
|
{
|
|
const char *mmc_regulators[] = {
|
|
"VDDQ_EMMC_1.8V",
|
|
"VDDQ_EMMC_2.8V",
|
|
"TFLASH_2.8V",
|
|
NULL,
|
|
};
|
|
|
|
if (regulator_list_autoset(mmc_regulators, NULL, true))
|
|
pr_err("Unable to init all mmc regulators\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_GADGET
|
|
static int s5pc210_phy_control(int on)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = regulator_get_by_platname("VDD_UOTG_3.0V", &dev);
|
|
if (ret) {
|
|
pr_err("Regulator get error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (on)
|
|
return regulator_set_mode(dev, OPMODE_ON);
|
|
else
|
|
return regulator_set_mode(dev, OPMODE_LPM);
|
|
}
|
|
|
|
struct dwc2_plat_otg_data s5pc210_otg_data = {
|
|
.phy_control = s5pc210_phy_control,
|
|
.regs_phy = EXYNOS4X12_USBPHY_BASE,
|
|
.regs_otg = EXYNOS4X12_USBOTG_BASE,
|
|
.usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
|
|
.usb_flags = PHY0_SLEEP,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB)
|
|
|
|
static void set_usb3503_ref_clk(void)
|
|
{
|
|
#ifdef CONFIG_BOARD_TYPES
|
|
/*
|
|
* gpx3-0 chooses primary (low) or secondary (high) reference clock
|
|
* frequencies table. The choice of clock is done through hard-wired
|
|
* REF_SEL pins.
|
|
* The Odroid Us have reference clock at 24 MHz (00 entry from secondary
|
|
* table) and Odroid Xs have it at 26 MHz (01 entry from primary table).
|
|
*/
|
|
if (gd->board_type == ODROID_TYPE_U3)
|
|
gpio_direction_output(EXYNOS4X12_GPIO_X30, 0);
|
|
else
|
|
gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
|
|
#else
|
|
/* Choose Odroid Xs frequency without board types */
|
|
gpio_direction_output(EXYNOS4X12_GPIO_X30, 1);
|
|
#endif /* CONFIG_BOARD_TYPES */
|
|
}
|
|
|
|
int board_usb_init(int index, enum usb_init_type init)
|
|
{
|
|
#ifdef CONFIG_CMD_USB
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
set_usb3503_ref_clk();
|
|
|
|
/* Disconnect, Reset, Connect */
|
|
gpio_direction_output(EXYNOS4X12_GPIO_X34, 0);
|
|
gpio_direction_output(EXYNOS4X12_GPIO_X35, 0);
|
|
gpio_direction_output(EXYNOS4X12_GPIO_X35, 1);
|
|
gpio_direction_output(EXYNOS4X12_GPIO_X34, 1);
|
|
|
|
/* Power off and on BUCK8 for LAN9730 */
|
|
debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
|
|
|
|
ret = regulator_get_by_platname("VCC_P3V3_2.85V", &dev);
|
|
if (ret) {
|
|
pr_err("Regulator get error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_set_enable(dev, true);
|
|
if (ret) {
|
|
pr_err("Regulator %s enable setting error: %d\n", dev->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_set_value(dev, 750000);
|
|
if (ret) {
|
|
pr_err("Regulator %s value setting error: %d\n", dev->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_set_value(dev, 3300000);
|
|
if (ret) {
|
|
pr_err("Regulator %s value setting error: %d\n", dev->name, ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
debug("USB_udc_probe\n");
|
|
return dwc2_udc_probe(&s5pc210_otg_data);
|
|
}
|
|
#endif
|