u-boot/board/icpdas/lp8x4x/lp8x4x.c
Sergei Ianovich 914f2bd1f0 arm: pxa: init ethaddr for LP-8x4x using DT
When DT define aliases for etherner0 and ethernet1, U-Boot
automatically patched MAC addresses using ethaddr and eth1addr
environment variables respectively.

Custom initialization is no longer needed.

Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
CC: Marek Vasut <marex@denx.de>
2013-12-18 18:15:26 +01:00

128 lines
2.5 KiB
C

/*
* ICP DAS LP-8x4x Support
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
* adapted from Voipac PXA270 Support by
* Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/hardware.h>
#include <asm/arch/regs-mmc.h>
#include <asm/arch/pxa.h>
#include <netdev.h>
#include <serial.h>
#include <asm/io.h>
#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
*/
int board_init(void)
{
/* We have RAM, disable cache */
dcache_disable();
icache_disable();
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
return 0;
}
int dram_init(void)
{
pxa2xx_dram_init();
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
}
#ifdef CONFIG_CMD_MMC
int board_mmc_init(bd_t *bis)
{
pxa_mmc_register(0);
return 0;
}
#endif
#ifdef CONFIG_CMD_USB
int board_usb_init(int index, enum usb_init_type init)
{
if (index !=0 || init != USB_INIT_HOST)
return -1;
writel(readl(CKEN) | CKEN10_USBHOST, CKEN);
writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
udelay(11);
writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
while (readl(UHCHR) & UHCHR_FSBIR)
continue; /* required by checkpath.pl */
writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR);
writel(readl(UHCRHDA) & ~(0x1000), UHCRHDA);
writel(readl(UHCRHDA) | 0x800, UHCRHDA);
writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
/* Clear any OTG Pin Hold */
if (readl(PSSR) & PSSR_OTGPH)
writel(readl(PSSR) | PSSR_OTGPH, PSSR);
writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
writel(readl(UHCRHDA) | 0x100, UHCRHDA);
/* Set port power control mask bits, only 3 ports. */
writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
return 0;
}
int usb_board_stop(void)
{
writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
udelay(11);
writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
writel(readl(UHCCOMS) | 1, UHCCOMS);
udelay(10);
writel(readl(UHCHR) | UHCHR_SSEP0 | UHCHR_SSE, UHCHR);
writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
return 0;
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
if (index !=0 || init != USB_INIT_HOST)
return -1;
return usb_board_stop();
}
#endif
#ifdef CONFIG_DRIVER_DM9000
int board_eth_init(bd_t *bis)
{
return dm9000_initialize(bis);
}
#endif