mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 19:23:07 +00:00
8bde7f776c
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
24 lines
813 B
Text
24 lines
813 B
Text
This document contains different information about the port
|
|
of U-Boot for the OXC board designed by Lucent Technologies,
|
|
Inc.
|
|
|
|
1. Showing activity
|
|
|
|
U-Boot for the OXC board can show its current status using
|
|
the Active LED. This feature is configured by the following
|
|
options:
|
|
|
|
CONFIG_SHOW_ACTIVITY
|
|
|
|
When this option is on, the Active LED is blinking fast
|
|
when U-Boot runs in the idle loop (i.e. waits for user
|
|
commands from serial console) and blinking slow when it
|
|
downloads an image over network. When U-Boot loads an image
|
|
over serial line the Active LED does not blink and its state
|
|
is random (i.e. either constant on or constant off).
|
|
|
|
CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
When this option is on, U-Boot switches the Active LED
|
|
off before booting an image and switches it on if booting
|
|
failed due to some reasons.
|