roy zang 4c52783b3d General code modification for mpc7448hpc2 board support. ... 1. Add 7447A and 7448 processor support. 2. Add the following flags. CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically (such as by switch on board), this flag should be set. CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot relocates to RAM, this flag should be set. CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the system hang in exception, this flag should be set. There is a design issue for tsi108/109 pci configure read. When pci scan the slots, if there is no pci card, the tsi108/9 will cause a machine check exception for mpc7448 processor. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>		2006-11-02 18:49:51 +08:00
..
cache.S	* Patch by Jim Sandoz, 07 Nov 2002:	2002-11-11 21:14:20 +00:00
config.mk	* Code cleanup, mostly for GCC-3.3.x	2004-12-31 09:32:47 +00:00
cpu.c	General code modification for mpc7448hpc2 board support.	2006-11-02 18:49:51 +08:00
cpu_init.c	General code modification for mpc7448hpc2 board support.	2006-11-02 18:49:51 +08:00
interrupts.c	* Patch by Gleb Natapov, 19 Sep 2003:	2003-12-06 19:49:23 +00:00
io.S	Initial revision	2002-01-15 18:58:11 +00:00
kgdb.S	* Patch by Yuli Barcohen, 19 Jul 2004:	2004-09-28 21:39:45 +00:00
Makefile	Move "ar" flags to config.mk to allow for silent "make -s"	2006-10-09 01:02:05 +02:00
speed.c	General code modification for mpc7448hpc2 board support.	2006-11-02 18:49:51 +08:00
start.S	Add support for wrPPMC7xx/74xx boards	2006-06-19 11:02:41 +02:00
traps.c	GCC-4.x fixes: clean up global data pointer initialization for all boards.	2006-03-31 18:32:53 +02:00