u-boot/drivers/net/qe/uccf.h
Heiko Schocher 6e31c62a17 net, qe: add DM support for QE UEC ethernet
add DM/DTS support for the UEC ethernet on QUICC Engine
Block.

Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>
Patch-cc: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Patch-cc: Madalin Bucur <madalin.bucur@oss.nxp.com>

Series-changes: 3
- revert:
  commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled")
  as now qe works with DM and DM_ETH support.
- fix mailaddress from Holger

Series-changes: 2
- add comments from Qiang Zhao:
  - add device node documentation
  - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c
    because using drivers/net/fsl_mdio.c leads in none existent
    udevice mdio@3320
    instead boards with DM ETH support should use now this
    driver.
- remove RFC tag

Commit-notes:

- I let the old none DM based implementation in code
  so boards should work with old implementation.
  This Code should be removed if all boards are converted
  to DM/DTS.

- add the DM based qe uec driver under drivers/net/qe

- Therefore copied the files uccf.c uccf.h uec.h from
  drivers/qe. So there are a lot of Codingstyle problems
  currently. I fix them in next version if this RFC
  patch is OK or it needs some changes.

- The dm based driver code is now under drivers/net/qe/dm_qe_uec.c
  Used a lot of functions from drivers/qe/uec.c

- seperated the PHY specific code into seperate file
  drivers/net/qe/dm_qe_uec_phy.c

END
2020-09-17 06:09:53 +02:00

119 lines
3.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
*/
#ifndef __UCCF_H__
#define __UCCF_H__
#include "common.h"
#include "linux/immap_qe.h"
#include <fsl_qe.h>
/* Fast or Giga ethernet */
enum enet_type {
FAST_ETH,
GIGA_ETH,
};
/* General UCC Extended Mode Register */
#define UCC_GUEMR_MODE_MASK_RX 0x02
#define UCC_GUEMR_MODE_MASK_TX 0x01
#define UCC_GUEMR_MODE_FAST_RX 0x02
#define UCC_GUEMR_MODE_FAST_TX 0x01
#define UCC_GUEMR_MODE_SLOW_RX 0x00
#define UCC_GUEMR_MODE_SLOW_TX 0x00
/* Bit 3 must be set 1 */
#define UCC_GUEMR_SET_RESERVED3 0x10
/* General UCC FAST Mode Register */
#define UCC_FAST_GUMR_TCI 0x20000000
#define UCC_FAST_GUMR_TRX 0x10000000
#define UCC_FAST_GUMR_TTX 0x08000000
#define UCC_FAST_GUMR_CDP 0x04000000
#define UCC_FAST_GUMR_CTSP 0x02000000
#define UCC_FAST_GUMR_CDS 0x01000000
#define UCC_FAST_GUMR_CTSS 0x00800000
#define UCC_FAST_GUMR_TXSY 0x00020000
#define UCC_FAST_GUMR_RSYN 0x00010000
#define UCC_FAST_GUMR_RTSM 0x00002000
#define UCC_FAST_GUMR_REVD 0x00000400
#define UCC_FAST_GUMR_ENR 0x00000020
#define UCC_FAST_GUMR_ENT 0x00000010
/* GUMR [MODE] bit maps */
#define UCC_FAST_GUMR_HDLC 0x00000000
#define UCC_FAST_GUMR_QMC 0x00000002
#define UCC_FAST_GUMR_UART 0x00000004
#define UCC_FAST_GUMR_BISYNC 0x00000008
#define UCC_FAST_GUMR_ATM 0x0000000a
#define UCC_FAST_GUMR_ETH 0x0000000c
/* Transmit On Demand (UTORD) */
#define UCC_SLOW_TOD 0x8000
#define UCC_FAST_TOD 0x8000
/* Fast Ethernet (10/100 Mbps) */
/* Rx virtual FIFO size */
#define UCC_GETH_URFS_INIT 512
/* 1/2 urfs */
#define UCC_GETH_URFET_INIT 256
/* 3/4 urfs */
#define UCC_GETH_URFSET_INIT 384
/* Tx virtual FIFO size */
#define UCC_GETH_UTFS_INIT 512
/* 1/2 utfs */
#define UCC_GETH_UTFET_INIT 256
#define UCC_GETH_UTFTT_INIT 128
/* Gigabit Ethernet (1000 Mbps) */
/* Rx virtual FIFO size */
#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/
/* 1/2 urfs */
#define UCC_GETH_URFET_GIGA_INIT 2048/*1024*/
/* 3/4 urfs */
#define UCC_GETH_URFSET_GIGA_INIT 3072/*1536*/
/* Tx virtual FIFO size */
#define UCC_GETH_UTFS_GIGA_INIT 8192/*2048*/
/* 1/2 utfs */
#define UCC_GETH_UTFET_GIGA_INIT 4096/*1024*/
#define UCC_GETH_UTFTT_GIGA_INIT 0x400/*0x40*/
/* UCC fast alignment */
#define UCC_FAST_RX_ALIGN 4
#define UCC_FAST_MRBLR_ALIGNMENT 4
#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
/* Sizes */
#define UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD 8
/* UCC fast structure. */
struct ucc_fast_inf {
int ucc_num;
qe_clock_e rx_clock;
qe_clock_e tx_clock;
enum enet_type eth_type;
};
struct ucc_fast_priv {
struct ucc_fast_inf *uf_info;
ucc_fast_t *uf_regs; /* a pointer to memory map of UCC regs */
u32 *p_ucce; /* a pointer to the event register */
u32 *p_uccm; /* a pointer to the mask register */
int enabled_tx; /* whether UCC is enabled for Tx (ENT) */
int enabled_rx; /* whether UCC is enabled for Rx (ENR) */
u32 ucc_fast_tx_virtual_fifo_base_offset;
u32 ucc_fast_rx_virtual_fifo_base_offset;
};
void ucc_fast_transmit_on_demand(struct ucc_fast_priv *uccf);
u32 ucc_fast_get_qe_cr_subblock(int ucc_num);
void ucc_fast_enable(struct ucc_fast_priv *uccf, comm_dir_e mode);
void ucc_fast_disable(struct ucc_fast_priv *uccf, comm_dir_e mode);
int ucc_fast_init(struct ucc_fast_inf *uf_info,
struct ucc_fast_priv **uccf_ret);
#endif /* __UCCF_H__ */