mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 21:24:29 +00:00
d7d7606c7e
This driver is derived from this Linux driver: linux/drivers/phy/ralink/phy-ralink-usb.c The driver sets up power and host mode, but also needs to configure PHY registers for the MT7628 and MT7688. I removed the reset controller handling for the USB host and device, as it does not seem to be necessary right now. The soft reset bits for both devices are enabled by default and testing has shown (with hackish reset handling added), that USB related commands work identical with or without the reset handling. Please note that the resulting USB support is tested only very minimal. I was able to detect one of my 3 currently available USB sticks. Perhaps some further work is needed to fully support the EHCI controller integrated in the MT76x8 SoC. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
185 lines
5.2 KiB
Text
185 lines
5.2 KiB
Text
|
|
menu "PHY Subsystem"
|
|
|
|
config PHY
|
|
bool "PHY Core"
|
|
depends on DM
|
|
help
|
|
PHY support.
|
|
|
|
This framework is designed to provide a generic interface for PHY
|
|
devices. PHY devices are dedicated hardware that handle the physical
|
|
layer of the protocols in the OSI model.
|
|
PHYs are commonly used for high speed interfaces such as Serial-ATA
|
|
or PCI express.
|
|
The API provides functions to initialize/deinitialize the
|
|
PHY, power on/off the PHY, and reset the PHY. It's meant to be as
|
|
compatible as possible with the equivalent framework found in the
|
|
linux kernel.
|
|
|
|
config SPL_PHY
|
|
bool "PHY Core in SPL"
|
|
depends on DM
|
|
help
|
|
PHY support in SPL.
|
|
|
|
This framework is designed to provide a generic interface for PHY
|
|
devices. PHY devices are dedicated hardware that handle the physical
|
|
layer of the protocols (https://en.wikipedia.org/wiki/OSI_model).
|
|
PHYs are commonly used for high speed interfaces such as Serial-ATA
|
|
or PCI express.
|
|
The API provides functions to initialize/deinitialize the
|
|
PHY, power on/off the PHY, and reset the PHY. It's meant to be as
|
|
compatible as possible with the equivalent framework found in the
|
|
linux kernel.
|
|
|
|
config PHY_SANDBOX
|
|
bool "Sandbox PHY support"
|
|
depends on SANDBOX
|
|
depends on PHY
|
|
help
|
|
This select a dummy sandbox PHY driver. It used only to implement
|
|
the unit tests for the phy framework
|
|
|
|
config NOP_PHY
|
|
bool "NOP PHY driver"
|
|
depends on PHY
|
|
help
|
|
Support for a no-op PHY driver (stubbed PHY driver).
|
|
|
|
This is useful when a driver uses the PHY framework but no real PHY
|
|
hardware exists.
|
|
|
|
config SPL_NOP_PHY
|
|
bool "NOP PHY driver in SPL"
|
|
depends on SPL_PHY
|
|
help
|
|
Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
|
|
|
|
This is useful when a driver uses the PHY framework but no real PHY
|
|
hardware exists.
|
|
|
|
config BCM6318_USBH_PHY
|
|
bool "BCM6318 USBH PHY support"
|
|
depends on PHY && ARCH_BMIPS
|
|
select POWER_DOMAIN
|
|
help
|
|
Support for the Broadcom MIPS BCM6318 USBH PHY.
|
|
|
|
config BCM6348_USBH_PHY
|
|
bool "BCM6348 USBH PHY support"
|
|
depends on PHY && ARCH_BMIPS
|
|
help
|
|
Support for the Broadcom MIPS BCM6348 USBH PHY.
|
|
|
|
config BCM6358_USBH_PHY
|
|
bool "BCM6358 USBH PHY support"
|
|
depends on PHY && ARCH_BMIPS
|
|
help
|
|
Support for the Broadcom MIPS BCM6358 USBH PHY.
|
|
|
|
config BCM6368_USBH_PHY
|
|
bool "BCM6368 USBH PHY support"
|
|
depends on PHY && ARCH_BMIPS
|
|
help
|
|
Support for the Broadcom MIPS BCM6368 USBH PHY.
|
|
|
|
config PIPE3_PHY
|
|
bool "Support omap's PIPE3 PHY"
|
|
depends on PHY && ARCH_OMAP2PLUS
|
|
help
|
|
Support for the omap PIPE3 phy for sata
|
|
|
|
This PHY is found on omap devices supporting SATA such as dra7, am57x
|
|
and omap5
|
|
|
|
config SPL_PIPE3_PHY
|
|
bool "Support omap's PIPE3 PHY in SPL"
|
|
depends on SPL_PHY && ARCH_OMAP2PLUS
|
|
help
|
|
Support for the omap PIPE3 phy for sata in SPL
|
|
|
|
This PHY is found on omap devices supporting SATA such as dra7, am57x
|
|
and omap5
|
|
|
|
config STI_USB_PHY
|
|
bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
|
|
depends on PHY && ARCH_STI
|
|
help
|
|
This is the generic phy driver for the picoPHY ports
|
|
used by USB2 and USB3 Host controllers available on
|
|
STiH407 SoC families.
|
|
|
|
config PHY_RCAR_GEN2
|
|
tristate "Renesas R-Car Gen2 USB PHY"
|
|
depends on PHY && RCAR_GEN2
|
|
help
|
|
Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
|
|
PHY connected to USBHS module, PCI EHCI module and USB3.0 module and
|
|
allows configuring the module multiplexing.
|
|
|
|
config PHY_RCAR_GEN3
|
|
tristate "Renesas R-Car Gen3 USB PHY"
|
|
depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR
|
|
default y if RCAR_GEN3
|
|
help
|
|
Support for the Renesas R-Car Gen3 USB PHY. This driver operates the
|
|
PHY connected to EHCI USB module and controls USB OTG operation.
|
|
|
|
config PHY_STM32_USBPHYC
|
|
tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
|
|
depends on PHY && ARCH_STM32MP
|
|
help
|
|
Enable this to support the High-Speed USB transceiver that is part of
|
|
STMicroelectronics STM32 SoCs.
|
|
|
|
This driver controls the entire USB PHY block: the USB PHY controller
|
|
(USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
|
|
used by an HS USB Host controller, and the second one is shared
|
|
between an HS USB OTG controller and an HS USB Host controller,
|
|
selected by an USB switch.
|
|
|
|
config MESON_GXL_USB_PHY
|
|
bool "Amlogic Meson GXL USB PHYs"
|
|
depends on PHY && ARCH_MESON && (MESON_GXL || MESON_GXM)
|
|
imply REGMAP
|
|
help
|
|
This is the generic phy driver for the Amlogic Meson GXL
|
|
USB2 and USB3 PHYS.
|
|
|
|
config MSM8916_USB_PHY
|
|
bool "Qualcomm MSM8916 USB PHY support"
|
|
depends on PHY
|
|
help
|
|
Support the USB PHY in msm8916
|
|
|
|
This PHY is found on qualcomm dragonboard410c development board.
|
|
|
|
config OMAP_USB2_PHY
|
|
bool "Support OMAP's USB2 PHY"
|
|
depends on PHY
|
|
depends on SYSCON
|
|
help
|
|
Support for the OMAP's USB2 PHY.
|
|
|
|
This PHY is found on OMAP devices supporting USB2.
|
|
|
|
|
|
config KEYSTONE_USB_PHY
|
|
bool "Support TI Keystone USB PHY"
|
|
depends on PHY
|
|
depends on ARCH_KEYSTONE
|
|
help
|
|
Support for the USB PHY found on some Keystone (k2) processors
|
|
|
|
This PHY is found on some Keystone (K2) devices supporting USB.
|
|
|
|
config MT76X8_USB_PHY
|
|
bool "MediaTek MT76x8 (7628/88) USB PHY support"
|
|
depends on PHY
|
|
help
|
|
Support the USB PHY in MT76x8 SoCs
|
|
|
|
This PHY is found on MT76x8 devices supporting USB.
|
|
|
|
endmenu
|