mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
77 lines
3.1 KiB
C
77 lines
3.1 KiB
C
/*
|
|
* TWI Masks
|
|
*/
|
|
|
|
#ifndef __BFIN_PERIPHERAL_TWI__
|
|
#define __BFIN_PERIPHERAL_TWI__
|
|
|
|
/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
|
|
#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
|
|
#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
|
|
|
|
/* TWI_PRESCALE Masks */
|
|
#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
|
|
#define TWI_ENA 0x0080 /* TWI Enable */
|
|
#define SCCB 0x0200 /* SCCB Compatibility Enable */
|
|
|
|
/* TWI_SLAVE_CTL Masks */
|
|
#define SEN 0x0001 /* Slave Enable */
|
|
#define SADD_LEN 0x0002 /* Slave Address Length */
|
|
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
|
|
#define TSC_NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
|
|
#define GEN 0x0010 /* General Call Adrress Matching Enabled */
|
|
|
|
/* TWI_SLAVE_STAT Masks */
|
|
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
|
|
#define GCALL 0x0002 /* General Call Indicator */
|
|
|
|
/* TWI_MASTER_CTRL Masks */
|
|
#define MEN 0x0001 /* Master Mode Enable */
|
|
#define MADD_LEN 0x0002 /* Master Address Length */
|
|
#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
|
|
#define FAST 0x0008 /* Use Fast Mode Timing Specs */
|
|
#define STOP 0x0010 /* Issue Stop Condition */
|
|
#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
|
|
#define DCNT 0x3FC0 /* Data Bytes To Transfer */
|
|
#define SDAOVR 0x4000 /* Serial Data Override */
|
|
#define SCLOVR 0x8000 /* Serial Clock Override */
|
|
|
|
/* TWI_MASTER_STAT Masks */
|
|
#define MPROG 0x0001 /* Master Transfer In Progress */
|
|
#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
|
|
#define ANAK 0x0004 /* Address Not Acknowledged */
|
|
#define DNAK 0x0008 /* Data Not Acknowledged */
|
|
#define BUFRDERR 0x0010 /* Buffer Read Error */
|
|
#define BUFWRERR 0x0020 /* Buffer Write Error */
|
|
#define SDASEN 0x0040 /* Serial Data Sense */
|
|
#define SCLSEN 0x0080 /* Serial Clock Sense */
|
|
#define BUSBUSY 0x0100 /* Bus Busy Indicator */
|
|
|
|
/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
|
|
#define SINIT 0x0001 /* Slave Transfer Initiated */
|
|
#define SCOMP 0x0002 /* Slave Transfer Complete */
|
|
#define SERR 0x0004 /* Slave Transfer Error */
|
|
#define SOVF 0x0008 /* Slave Overflow */
|
|
#define MCOMP 0x0010 /* Master Transfer Complete */
|
|
#define MERR 0x0020 /* Master Transfer Error */
|
|
#define XMTSERV 0x0040 /* Transmit FIFO Service */
|
|
#define RCVSERV 0x0080 /* Receive FIFO Service */
|
|
|
|
/* TWI_FIFO_CTRL Masks */
|
|
#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
|
|
#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
|
|
#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
|
|
#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
|
|
|
|
/* TWI_FIFO_STAT Masks */
|
|
#define XMTSTAT 0x0003 /* Transmit FIFO Status */
|
|
#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
|
|
#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
|
|
#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
|
|
|
|
#define RCVSTAT 0x000C /* Receive FIFO Status */
|
|
#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
|
|
#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
|
|
#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
|
|
|
|
#endif
|