u-boot/board/timll/devkit3250/devkit3250.c
Vladimir Zapolskiy 768ddeeecf lpc32xx: devkit3250: update of board configuration
This change adds more peripherals to Timll DevKit3250 board, namely
MAC and SMSC phy, SLC NAND, GPIO, SPI and I2C.

Also the default serial console is changed to UART5, added an option
to pass device tree blob by means of bootm, predefined environment
variables are slightly extended and reserved space on NAND to store
user defined U-boot environment.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2015-08-12 20:47:34 -04:00

81 lines
2 KiB
C

/*
* Embest/Timll DevKit3250 board support
*
* Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/emc.h>
#include <asm/arch/wdt.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE;
void reset_periph(void)
{
/* This function resets peripherals by triggering RESOUT_N */
setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
writel(WDTIM_MCTRL_RESFRC1, &wdt->mctrl);
udelay(300);
writel(0, &wdt->mctrl);
clrbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
/* Such a long delay is needed to initialize SMSC phy */
udelay(10000);
}
int board_early_init_f(void)
{
lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
lpc32xx_i2c_init(1);
lpc32xx_i2c_init(2);
lpc32xx_ssp_init();
lpc32xx_mac_init();
/*
* nWP may be controlled by GPO19, but unpopulated by default R23
* makes no sense to configure this GPIO level, nWP is always high
*/
lpc32xx_slc_nand_init();
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_SYS_FLASH_CFI
/* Use 16-bit memory interface for NOR Flash */
emc->stat[0].config = EMC_STAT_CONFIG_PB | EMC_STAT_CONFIG_16BIT;
/* Change the NOR timings to optimum value to get maximum bandwidth */
emc->stat[0].waitwen = EMC_STAT_WAITWEN(1);
emc->stat[0].waitoen = EMC_STAT_WAITOEN(1);
emc->stat[0].waitrd = EMC_STAT_WAITRD(12);
emc->stat[0].waitpage = EMC_STAT_WAITPAGE(12);
emc->stat[0].waitwr = EMC_STAT_WAITWR(5);
emc->stat[0].waitturn = EMC_STAT_WAITTURN(2);
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}