mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
9973e3c614
This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> |
||
|---|---|---|
| .. | ||
| config.mk | ||
| cu824.c | ||
| flash.c | ||
| Makefile | ||
| README | ||
ppcboot for a CU824 board
---------------------------
CU824 has two banks of flash 8MB each. In board's notation, bank 0 is
the one at the address of 0xFF800000 and bank 1 is the one at the
address of 0xFF000000. On power-up the processor jumps to the address
of 0xFFF00100, the last megabyte of the bank 0 of flash. Thus,
U-Boot is configured to reside in flash starting at the address of
0xFFF00000. The environment space is not embedded in the U-Boot code
and is located in flash separately from U-Boot, at the address of
0xFF008000.
U-Boot test results
--------------------
x.x Operation on all available serial consoles
x.x.x CONFIG_CONS_INDEX 1
ppcboot 0.9.2 (May 13 2001 - 17:56:46)
Initializing...
CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
Board: CU824 Revision 1 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=>
=>he
go - start application at address 'addr'
run - run commands in an environment variable
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
tftpboot- boot image via network using TFTP protocol
and env variables ipaddr and serverip
rarpboot- boot image via network using RARP/TFTP protocol
bootd - boot default, i.e., run 'bootcmd'
loads - load S-Record file over serial line
loadb - load binary file over serial line (kermit mode)
md - memory display
mm - memory modify (auto-incrementing)
nm - memory modify (constant address)
mw - memory write (fill)
cp - memory copy
cmp - memory compare
crc32 - checksum calculation
base - print or set address offset
printenv- print environment variables
setenv - set environment variables
saveenv - save environment variables to persistent storage
protect - enable or disable FLASH write protection
erase - erase FLASH memory
flinfo - print FLASH memory information
bdinfo - print Board Info structure
iminfo - print header information for application image
coninfo - print console devices and informations
loop - infinite loop on address range
mtest - simple RAM test
icache - enable or disable instruction cache
dcache - enable or disable data cache
reset - Perform RESET of the CPU
echo - echo args to console
version - print monitor version
help - print online help
? - alias for 'help'
=>
x.x.x CONFIG_CONS_INDEX 2
**** NOT TESTED ****
x.x Flash Driver Operation
x.x.x Erase Operation
ppcboot 0.9.2 (May 13 2001 - 17:56:46)
Initializing...
CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
Board: CU824 Revision 1 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=>
=>
=>
=>md ff000000
ff000000: 27051956 70706362 6f6f7420 302e382e '..Vppcboot 0.8.
ff000010: 3320284d 61792031 31203230 3031202d 3 (May 11 2001 -
ff000020: 2031343a 35373a30 33290000 00000000 14:57:03)......
ff000030: 00000000 00000000 00000000 00000000 ................
ff000040: 00000000 00000000 00000000 00000000 ................
ff000050: 00000000 00000000 00000000 00000000 ................
ff000060: 00000000 00000000 00000000 00000000 ................
ff000070: 00000000 00000000 00000000 00000000 ................
ff000080: 00000000 00000000 00000000 00000000 ................
ff000090: 00000000 00000000 00000000 00000000 ................
ff0000a0: 00000000 00000000 00000000 00000000 ................
ff0000b0: 00000000 00000000 00000000 00000000 ................
ff0000c0: 00000000 00000000 00000000 00000000 ................
ff0000d0: 00000000 00000000 00000000 00000000 ................
ff0000e0: 00000000 00000000 00000000 00000000 ................
ff0000f0: 00000000 00000000 00000000 00000000 ................
=>erase ff000000 ff007fff
Erase Flash from 0xff000000 to 0xff007fff
done
Erased 1 sectors
=>md ff000000
ff000000: ffffffff ffffffff ffffffff ffffffff ................
ff000010: ffffffff ffffffff ffffffff ffffffff ................
ff000020: ffffffff ffffffff ffffffff ffffffff ................
ff000030: ffffffff ffffffff ffffffff ffffffff ................
ff000040: ffffffff ffffffff ffffffff ffffffff ................
ff000050: ffffffff ffffffff ffffffff ffffffff ................
ff000060: ffffffff ffffffff ffffffff ffffffff ................
ff000070: ffffffff ffffffff ffffffff ffffffff ................
ff000080: ffffffff ffffffff ffffffff ffffffff ................
ff000090: ffffffff ffffffff ffffffff ffffffff ................
ff0000a0: ffffffff ffffffff ffffffff ffffffff ................
ff0000b0: ffffffff ffffffff ffffffff ffffffff ................
ff0000c0: ffffffff ffffffff ffffffff ffffffff ................
ff0000d0: ffffffff ffffffff ffffffff ffffffff ................
ff0000e0: ffffffff ffffffff ffffffff ffffffff ................
ff0000f0: ffffffff ffffffff ffffffff ffffffff ................
=>
x.x.x Information
ppcboot 0.9.2 (May 13 2001 - 17:56:46)
Initializing...
CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
Board: CU824 Revision 1 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=>
=>
=>
=>
=>flinfo
Bank # 1: Intel: 28F160F3B (16Mbit)
Size: 8 MB in 39 Sectors
Sector Start Addresses:
FF000000 FF008000 (RO) FF010000 FF018000 FF020000
FF028000 FF030000 FF038000 FF040000 FF080000
FF0C0000 FF100000 FF140000 FF180000 FF1C0000
FF200000 FF240000 FF280000 FF2C0000 FF300000
FF340000 FF380000 FF3C0000 FF400000 FF440000
FF480000 FF4C0000 FF500000 FF540000 FF580000
FF5C0000 FF600000 FF640000 FF680000 FF6C0000
FF700000 FF740000 FF780000 FF7C0000
Bank # 2: Intel: 28F160F3B (16Mbit)
Size: 8 MB in 39 Sectors
Sector Start Addresses:
FF800000 FF808000 FF810000 FF818000 FF820000
FF828000 FF830000 FF838000 FF840000 FF880000
FF8C0000 FF900000 FF940000 FF980000 FF9C0000
FFA00000 FFA40000 FFA80000 FFAC0000 FFB00000
FFB40000 FFB80000 FFBC0000 FFC00000 FFC40000
FFC80000 FFCC0000 FFD00000 FFD40000 FFD80000
FFDC0000 FFE00000 FFE40000 FFE80000 FFEC0000
FFF00000 (RO) FFF40000 FFF80000 FFFC0000
=>
x.x.x Flash Programming
ppcboot 0.9.2 (May 13 2001 - 17:56:46)
Initializing...
CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
Board: CU824 Revision 1 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=>
=>
=>
=>
=>cp 0 ff000000 20
Copy to Flash... done
=>md 0
00000000: 0ec08ce0 03f9800c 00000001 040c0000 ................
00000010: 00000001 03fd1aa0 03fd1ae4 03fd1a00 ................
00000020: 03fd1a58 03fceb04 03fd34cc 03fd34d0 ...X......4...4.
00000030: 03fcd5bc 03fcdabc 00000000 00000000 ................
00000040: 00000000 00000000 00000000 00000000 ................
00000050: 00000000 00000000 00000000 00000000 ................
00000060: 00000000 00000000 00000000 00000000 ................
00000070: 00000000 00000000 00000000 00000000 ................
00000080: 00000000 00000000 00000000 00000000 ................
00000090: 00000000 00000000 00000000 00000000 ................
000000a0: 00000000 00000000 00000000 00000000 ................
000000b0: 00000000 00000000 00000000 00000000 ................
000000c0: 00000000 00000000 00000000 00000000 ................
000000d0: 00000000 00000000 00000000 00000000 ................
000000e0: 00000000 00000000 00000000 00000000 ................
000000f0: 00000000 00000000 00000000 00000000 ................
=>md ff000000
ff000000: 0ec08ce0 03f9800c 00000001 040c0000 ................
ff000010: 00000001 03fd1aa0 03fd1ae4 03fd1a00 ................
ff000020: 03fd1a58 03fceb04 03fd34cc 03fd34d0 ...X......4...4.
ff000030: 03fcd5bc 03fcdabc 00000000 00000000 ................
ff000040: 00000000 00000000 00000000 00000000 ................
ff000050: 00000000 00000000 00000000 00000000 ................
ff000060: 00000000 00000000 00000000 00000000 ................
ff000070: 00000000 00000000 00000000 00000000 ................
ff000080: ffffffff ffffffff ffffffff ffffffff ................
ff000090: ffffffff ffffffff ffffffff ffffffff ................
ff0000a0: ffffffff ffffffff ffffffff ffffffff ................
ff0000b0: ffffffff ffffffff ffffffff ffffffff ................
ff0000c0: ffffffff ffffffff ffffffff ffffffff ................
ff0000d0: ffffffff ffffffff ffffffff ffffffff ................
ff0000e0: ffffffff ffffffff ffffffff ffffffff ................
ff0000f0: ffffffff ffffffff ffffffff ffffffff ................
=>
x.x.x Storage of environment variables in flash
ppcboot 0.9.2 (May 13 2001 - 17:56:46)
Initializing...
CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
Board: CU824 Revision 1 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=>
=>printenv
bootargs=
bootcmd=bootm FE020000
bootdelay=5
baudrate=9600
ipaddr=192.168.4.2
serverip=192.168.4.1
ethaddr=00:40:42:01:00:a0
stdin=serial
stdout=serial
stderr=serial
Environment size: 167/32764 bytes
=>setenv myvar 1234
=>save_env
Un-Protected 1 sectors
Erasing Flash...
done
Erased 1 sectors
Saving Environment to Flash...
Protected 1 sectors
=>reset
ppcboot 0.9.2 (May 13 2001 - 17:56:46)
Initializing...
CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
Board: CU824 Revision 1 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=>
=>printenv
bootargs=
bootcmd=bootm FE020000
bootdelay=5
baudrate=9600
ipaddr=192.168.4.2
serverip=192.168.4.1
ethaddr=00:40:42:01:00:a0
myvar=1234
stdin=serial
stdout=serial
stderr=serial
Environment size: 178/32764 bytes
=>
x.x Image Download and run over serial port
ppcboot 0.9.2 (May 13 2001 - 17:56:46)
Initializing...
CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
Board: CU824 Revision 1 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=>
=>
=>mw 40000 0 10000
=>md 40000
00040000: 00000000 00000000 00000000 00000000 ................
00040010: 00000000 00000000 00000000 00000000 ................
00040020: 00000000 00000000 00000000 00000000 ................
00040030: 00000000 00000000 00000000 00000000 ................
00040040: 00000000 00000000 00000000 00000000 ................
00040050: 00000000 00000000 00000000 00000000 ................
00040060: 00000000 00000000 00000000 00000000 ................
00040070: 00000000 00000000 00000000 00000000 ................
00040080: 00000000 00000000 00000000 00000000 ................
00040090: 00000000 00000000 00000000 00000000 ................
000400a0: 00000000 00000000 00000000 00000000 ................
000400b0: 00000000 00000000 00000000 00000000 ................
000400c0: 00000000 00000000 00000000 00000000 ................
000400d0: 00000000 00000000 00000000 00000000 ................
000400e0: 00000000 00000000 00000000 00000000 ................
000400f0: 00000000 00000000 00000000 00000000 ................
=>loads
## Ready for S-Record download ...
(Back at xpert.denx.de)
[vlad@xpert vlad]$ cat hello_world.srec >/dev/ttyS0
[vlad@xpert vlad]$ kermit -l /dev/ttyS0 -b 9600 -c
Connecting to /dev/ttyS0, speed 9600.
The escape character is Ctrl-\ (ASCII 28, FS)
Type the escape character followed by C to get back,
or followed by ? to see other options.
md 40000
00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a..
00040010: 90010024 48000005 7fc802a6 801effe8 ...$H...........
00040020: 7fc0f214 7c7f1b78 813f0038 7c9c2378 ....|..x.?.8|.#x
00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`..
00040040: 7c0803a6 4e800021 813f0038 7f84e378 |...N..!.?.8...x
00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..!
00040060: 7c1be000 4181003c 80bd0000 813f0038 |...A..<.....?.8
00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,...@.......
00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{..
00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@...
000400a0: 813f0038 807e8010 80090010 7c0803a6 .?.8.~......|...
000400b0: 4e800021 813f0038 80090004 7c0803a6 N..!.?.8....|...
000400c0: 4e800021 2c030000 4182ffec 813f0038 N..!,...A....?.8
000400d0: 80090000 7c0803a6 4e800021 813f0038 ....|...N..!.?.8
000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..!
000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a..
=>go 40004
## Starting application at 0x00040004 ...
Hello World
argc = 1
argv[0] = "40004"
argv[1] = "<NULL>"
Hit any key to exit ...
## Application terminated, rc = 0x0
=>
x.x Image download and run over ethernet interface
ppcboot 0.9.2 (May 13 2001 - 17:56:46)
Initializing...
CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
Board: CU824 Revision 1 Local Bus at 99 MHz
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=>
=>
=>mw 40000 0 10000
=>md 40000
00040000: 00000000 00000000 00000000 00000000 ................
00040010: 00000000 00000000 00000000 00000000 ................
00040020: 00000000 00000000 00000000 00000000 ................
00040030: 00000000 00000000 00000000 00000000 ................
00040040: 00000000 00000000 00000000 00000000 ................
00040050: 00000000 00000000 00000000 00000000 ................
00040060: 00000000 00000000 00000000 00000000 ................
00040070: 00000000 00000000 00000000 00000000 ................
00040080: 00000000 00000000 00000000 00000000 ................
00040090: 00000000 00000000 00000000 00000000 ................
000400a0: 00000000 00000000 00000000 00000000 ................
000400b0: 00000000 00000000 00000000 00000000 ................
000400c0: 00000000 00000000 00000000 00000000 ................
000400d0: 00000000 00000000 00000000 00000000 ................
000400e0: 00000000 00000000 00000000 00000000 ................
000400f0: 00000000 00000000 00000000 00000000 ................
=>tftpboot 40000 hello_world.bin
ARP broadcast 1
TFTP from server 192.168.4.1; our IP address is 192.168.4.2
Filename 'hello_world.bin'.
Load address: 0x40000
Loading: #############
done
Bytes transferred = 65912 (10178 hex)
=>md 40000
00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a..
00040010: 90010024 48000005 7fc802a6 801effe8 ...$H...........
00040020: 7fc0f214 7c7f1b78 813f0038 7c9c2378 ....|..x.?.8|.#x
00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`..
00040040: 7c0803a6 4e800021 813f0038 7f84e378 |...N..!.?.8...x
00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..!
00040060: 7c1be000 4181003c 80bd0000 813f0038 |...A..<.....?.8
00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,...@.......
00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{..
00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@...
000400a0: 813f0038 807e8010 80090010 7c0803a6 .?.8.~......|...
000400b0: 4e800021 813f0038 80090004 7c0803a6 N..!.?.8....|...
000400c0: 4e800021 2c030000 4182ffec 813f0038 N..!,...A....?.8
000400d0: 80090000 7c0803a6 4e800021 813f0038 ....|...N..!.?.8
000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..!
000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a..
=>go 40004
## Starting application at 0x00040004 ...
Hello World
argc = 1
argv[0] = "40004"
argv[1] = "<NULL>"
Hit any key to exit ...
## Application terminated, rc = 0x0
=>