mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-18 17:23:09 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
||
|---|---|---|
| .. | ||
| evb_rv1108.c | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Here is the step-by-step to boot U-Boot on rv1108 evb. Get ddr init binary ============================================================================== > git clone https://github.com/rockchip-linux/rkbin.git Compile U-Boot =========================== > make CROSS_COMPILE=arm-linux-gnueabi- evb-rv1108_defconfig all > ./tools/mkimage -n rv1108 -T rksd -d ../rkbin/rv1x/rv1108ddr_v1.00.bin spl.bin > cat spl.bin u-boot.bin > u-boot.img Flash the image by rkdeveloptool ================================ rkdeveloptool can get from https://github.com/rockchip-linux/rkdeveloptool.git Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: > rkdeveloptool db ./rkbin/rv1x/rv1108usbboot_v1.00.bin > rkdeveloptool wl 0x40 u-boot.img > rkdeveloptool RD You should be able to get U-Boot log message from boot console: DDR Version V1.02 20170220 In 400MHz DDR3 Bus Width=16 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=512MB mach:2 OUT U-Boot 2017.05-00693-g3a5b171 (Jun 01 2017 - 17:37:53 +0800) Model: Rockchip RV1108 Evaluation board DRAM: 128 MiB APLL: 600000000 DPLL:792000000 GPLL:384000000 MMC: Using default environment In: serial@10210000 Out: serial@10210000 Err: serial@10210000 Net: No ethernet found. Hit any key to stop autoboot: 0 =>