mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
262 lines
6.3 KiB
C
262 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014 Gateworks Corporation
|
|
* Author: Tim Harvey <tharvey@gateworks.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <hexdump.h>
|
|
#include <i2c.h>
|
|
#include <malloc.h>
|
|
#include <asm/bitops.h>
|
|
|
|
#include "gsc.h"
|
|
#include "ventana_eeprom.h"
|
|
|
|
/* read ventana EEPROM, check for validity, and return baseboard type */
|
|
int
|
|
read_eeprom(int bus, struct ventana_board_info *info)
|
|
{
|
|
int i;
|
|
int chksum;
|
|
char baseboard;
|
|
int type;
|
|
unsigned char *buf = (unsigned char *)info;
|
|
|
|
memset(info, 0, sizeof(*info));
|
|
|
|
/*
|
|
* On a board with a missing/depleted backup battery for GSC, the
|
|
* board may be ready to probe the GSC before its firmware is
|
|
* running. We will wait here indefinately for the GSC/EEPROM.
|
|
*/
|
|
while (1) {
|
|
if (0 == i2c_set_bus_num(bus) &&
|
|
0 == i2c_probe(GSC_EEPROM_ADDR))
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
/* read eeprom config section */
|
|
if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) {
|
|
puts("EEPROM: Failed to read EEPROM\n");
|
|
return GW_UNKNOWN;
|
|
}
|
|
|
|
/* sanity checks */
|
|
if (info->model[0] != 'G' || info->model[1] != 'W') {
|
|
puts("EEPROM: Invalid Model in EEPROM\n");
|
|
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf,
|
|
sizeof(*info));
|
|
return GW_UNKNOWN;
|
|
}
|
|
|
|
/* validate checksum */
|
|
for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
|
|
chksum += buf[i];
|
|
if ((info->chksum[0] != chksum>>8) ||
|
|
(info->chksum[1] != (chksum&0xff))) {
|
|
puts("EEPROM: Failed EEPROM checksum\n");
|
|
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf,
|
|
sizeof(*info));
|
|
return GW_UNKNOWN;
|
|
}
|
|
|
|
/* original GW5400-A prototype */
|
|
baseboard = info->model[3];
|
|
if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
|
|
baseboard = '0';
|
|
|
|
type = GW_UNKNOWN;
|
|
switch (baseboard) {
|
|
case '0': /* original GW5400-A prototype */
|
|
type = GW54proto;
|
|
break;
|
|
case '1':
|
|
type = GW51xx;
|
|
break;
|
|
case '2':
|
|
type = GW52xx;
|
|
break;
|
|
case '3':
|
|
type = GW53xx;
|
|
break;
|
|
case '4':
|
|
type = GW54xx;
|
|
break;
|
|
case '5':
|
|
if (info->model[4] == '1') {
|
|
type = GW551x;
|
|
break;
|
|
} else if (info->model[4] == '2') {
|
|
type = GW552x;
|
|
break;
|
|
} else if (info->model[4] == '3') {
|
|
type = GW553x;
|
|
break;
|
|
}
|
|
break;
|
|
case '6':
|
|
if (info->model[4] == '0')
|
|
type = GW560x;
|
|
break;
|
|
case '9':
|
|
if (info->model[4] == '0' && info->model[5] == '1')
|
|
type = GW5901;
|
|
else if (info->model[4] == '0' && info->model[5] == '2')
|
|
type = GW5902;
|
|
else if (info->model[4] == '0' && info->model[5] == '3')
|
|
type = GW5903;
|
|
else if (info->model[4] == '0' && info->model[5] == '4')
|
|
type = GW5904;
|
|
else if (info->model[4] == '0' && info->model[5] == '5')
|
|
type = GW5905;
|
|
else if (info->model[4] == '0' && info->model[5] == '6')
|
|
type = GW5906;
|
|
else if (info->model[4] == '0' && info->model[5] == '7')
|
|
type = GW5907;
|
|
else if (info->model[4] == '0' && info->model[5] == '8')
|
|
type = GW5908;
|
|
else if (info->model[4] == '0' && info->model[5] == '9')
|
|
type = GW5909;
|
|
break;
|
|
default:
|
|
printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);
|
|
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf,
|
|
sizeof(*info));
|
|
break;
|
|
}
|
|
return type;
|
|
}
|
|
|
|
/* list of config bits that the bootloader will remove from dtb if not set */
|
|
struct ventana_eeprom_config econfig[] = {
|
|
{ "eth0", "ethernet0", EECONFIG_ETH0 },
|
|
{ "usb0", NULL, EECONFIG_USB0 },
|
|
{ "usb1", NULL, EECONFIG_USB1 },
|
|
{ "mmc0", NULL, EECONFIG_SD0 },
|
|
{ "mmc1", NULL, EECONFIG_SD1 },
|
|
{ "mmc2", NULL, EECONFIG_SD2 },
|
|
{ "mmc3", NULL, EECONFIG_SD3 },
|
|
{ /* Sentinel */ }
|
|
};
|
|
|
|
#if defined(CONFIG_CMD_EECONFIG) && !defined(CONFIG_SPL_BUILD)
|
|
static struct ventana_eeprom_config *get_config(const char *name)
|
|
{
|
|
struct ventana_eeprom_config *cfg = econfig;
|
|
|
|
while (cfg->name) {
|
|
if (0 == strcmp(name, cfg->name))
|
|
return cfg;
|
|
cfg++;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static u8 econfig_bytes[sizeof(ventana_info.config)];
|
|
static int econfig_init = -1;
|
|
|
|
static int do_econfig(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
struct ventana_eeprom_config *cfg;
|
|
struct ventana_board_info *info = &ventana_info;
|
|
int i;
|
|
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
/* initialize */
|
|
if (econfig_init != 1) {
|
|
memcpy(econfig_bytes, info->config, sizeof(econfig_bytes));
|
|
econfig_init = 1;
|
|
}
|
|
|
|
/* list configs */
|
|
if ((strncmp(argv[1], "list", 4) == 0)) {
|
|
cfg = econfig;
|
|
while (cfg->name) {
|
|
printf("%s: %d\n", cfg->name,
|
|
test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
|
|
cfg++;
|
|
}
|
|
}
|
|
|
|
/* save */
|
|
else if ((strncmp(argv[1], "save", 4) == 0)) {
|
|
unsigned char *buf = (unsigned char *)info;
|
|
int chksum;
|
|
|
|
/* calculate new checksum */
|
|
memcpy(info->config, econfig_bytes, sizeof(econfig_bytes));
|
|
for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
|
|
chksum += buf[i];
|
|
debug("old chksum:0x%04x\n",
|
|
(info->chksum[0] << 8) | info->chksum[1]);
|
|
debug("new chksum:0x%04x\n", chksum);
|
|
info->chksum[0] = chksum >> 8;
|
|
info->chksum[1] = chksum & 0xff;
|
|
|
|
/* write new config data */
|
|
if (gsc_i2c_write(GSC_EEPROM_ADDR, info->config - (u8 *)info,
|
|
1, econfig_bytes, sizeof(econfig_bytes))) {
|
|
printf("EEPROM: Failed updating config\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
/* write new config data */
|
|
if (gsc_i2c_write(GSC_EEPROM_ADDR, info->chksum - (u8 *)info,
|
|
1, info->chksum, 2)) {
|
|
printf("EEPROM: Failed updating checksum\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
printf("Config saved to EEPROM\n");
|
|
}
|
|
|
|
/* get config */
|
|
else if (argc == 2) {
|
|
cfg = get_config(argv[1]);
|
|
if (cfg) {
|
|
printf("%s: %d\n", cfg->name,
|
|
test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
|
|
} else {
|
|
printf("invalid config: %s\n", argv[1]);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
}
|
|
|
|
/* set config */
|
|
else if (argc == 3) {
|
|
cfg = get_config(argv[1]);
|
|
if (cfg) {
|
|
if (simple_strtol(argv[2], NULL, 10)) {
|
|
test_and_set_bit(cfg->bit, econfig_bytes);
|
|
printf("Enabled %s\n", cfg->name);
|
|
} else {
|
|
test_and_clear_bit(cfg->bit, econfig_bytes);
|
|
printf("Disabled %s\n", cfg->name);
|
|
}
|
|
} else {
|
|
printf("invalid config: %s\n", argv[1]);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
}
|
|
|
|
else
|
|
return CMD_RET_USAGE;
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
econfig, 3, 0, do_econfig,
|
|
"EEPROM configuration",
|
|
"list - list config\n"
|
|
"save - save config to EEPROM\n"
|
|
"<name> - get config 'name'\n"
|
|
"<name> [0|1] - set config 'name' to value\n"
|
|
);
|
|
|
|
#endif /* CONFIG_CMD_EECONFIG */
|