u-boot/board/nvidia/seaboard/seaboard.c
Tom Warren ccf7988b9a tegra2: Enable MMC for Seaboard
This adds the required GPIO and pinmux configuration to make eMMC / SD work
on Seaboard.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
2011-10-27 21:56:29 +02:00

85 lines
2.3 KiB
C

/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/tegra2.h>
#include <asm/gpio.h>
#ifdef CONFIG_TEGRA2_MMC
#include <mmc.h>
#endif
/*
* Routine: gpio_config_uart
* Description: Force GPIO_PI3 low on Seaboard so UART4 works.
*/
void gpio_config_uart(void)
{
int gp = GPIO_PI3;
struct gpio_ctlr *gpio = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
struct gpio_ctlr_bank *bank = &gpio->gpio_bank[GPIO_BANK(gp)];
u32 val;
/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
val = readl(&bank->gpio_config[GPIO_PORT(gp)]);
val |= 1 << GPIO_BIT(gp);
writel(val, &bank->gpio_config[GPIO_PORT(gp)]);
val = readl(&bank->gpio_out[GPIO_PORT(gp)]);
val &= ~(1 << GPIO_BIT(gp));
writel(val, &bank->gpio_out[GPIO_PORT(gp)]);
val = readl(&bank->gpio_dir_out[GPIO_PORT(gp)]);
val |= 1 << GPIO_BIT(gp);
writel(val, &bank->gpio_dir_out[GPIO_PORT(gp)]);
}
#ifdef CONFIG_TEGRA2_MMC
/*
* Routine: gpio_config_mmc
* Description: Set GPIOs for SDMMC3 SDIO slot.
*/
void gpio_config_mmc(void)
{
/* Set EN_VDDIO_SD (GPIO I6) */
gpio_direction_output(GPIO_PI6, 1);
/* Config pin as GPI for Card Detect (GPIO I5) */
gpio_direction_input(GPIO_PI5);
}
/* this is a weak define that we are overriding */
int board_mmc_getcd(u8 *cd, struct mmc *mmc)
{
debug("board_mmc_getcd called\n");
*cd = 1; /* Assume card is inserted, or eMMC */
if (IS_SD(mmc)) {
/* Seaboard SDMMC3 = SDIO3_CD = GPIO_PI5 */
if (gpio_get_value(GPIO_PI5))
*cd = 0;
}
return 0;
}
#endif