u-boot/drivers/mtd/nand
Scott Wood 98d9d92359 nand/fsl_elbc: detect page size at runtime
This avoids needing a separate U-Boot config when some revisions
of a board have small-page NAND and other revisions have large-page
NAND (except for NAND SPL targets).

CONFIG_FSL_ELBC_FMR is removed -- it was never used nor documented, and
it gets in the way of this change.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-05-22 16:11:53 -05:00
..
am335x_spl_bch.c am33xx_spl_bch: simple SPL nand loader for AM33XX 2012-12-10 08:54:02 -07:00
atmel_nand.c atmel_nand: fix the U-Boot output information about nand flash with PMECC enable. 2012-09-13 14:28:13 +02:00
atmel_nand_ecc.h at91: atmel_nand: Update driver to support Programmable Multibit ECC controller 2012-09-01 17:06:14 +02:00
bfin_nand.c Blackfin: bfin_nand: mark local func static 2012-02-12 15:03:26 -05:00
davinci_nand.c NAND: davinci: choose correct 1-bit h/w ECC reg 2011-10-10 15:28:05 -05:00
diskonchip.c Remove legacy NAND and disk on chip code. 2009-07-16 19:07:47 -05:00
fsl_elbc_nand.c nand/fsl_elbc: detect page size at runtime 2013-05-22 16:11:53 -05:00
fsl_elbc_spl.c spl/nand: config symbol documentation 2012-11-26 15:41:26 -06:00
fsl_ifc_nand.c driver/mtd/IFC:Wait tWB time, poll R/B before command execution 2012-12-21 15:34:54 -06:00
fsl_upm.c MPC85xx: remove support for TQM85xx boards 2012-10-05 11:07:42 -07:00
fsmc_nand.c mtd/NAND: Add FSMC driver support 2012-07-07 14:07:38 +02:00
jz4740_nand.c MIPS: Jz4740: Add NAND driver 2011-10-12 23:28:37 +09:00
kb9202_nand.c KB9202: Add NAND support 2009-08-26 15:37:01 -05:00
kirkwood_nand.c kirkwood_nand: allow usage of NAND_ECC_SOFT_BCH 2013-04-12 21:42:01 +05:30
kmeter1_nand.c kmeter1_nand: allow uasge of NAND_ECC_SOFT_BCH 2013-02-15 17:47:20 -06:00
Makefile arm: Remove support for unused s3c64xx 2013-04-12 07:55:08 +02:00
mpc5121_nfc.c linux/compat.h: rename from linux/mtd/compat.h 2012-04-30 16:54:51 +02:00
mxc_nand.c Merge branch 'u-boot/master' into 'u-boot-arm/master' 2013-04-12 22:07:57 +02:00
mxc_nand.h nand: mxc: Switch NAND SPL to generic SPL 2013-04-12 07:55:07 +02:00
mxc_nand_spl.c lib: consolidate hang() 2013-05-01 16:41:08 -04:00
mxs_nand.c mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems 2012-12-11 17:19:51 -06:00
nand.c nand: Introduce CONFIG_SYS_NAND_SELF_INIT 2012-01-26 16:09:06 -06:00
nand_base.c nand: Move the sub-page read support enable to a flag 2012-11-26 15:41:28 -06:00
nand_bbt.c mtd, nand: move some printfs to debug output. 2012-05-18 18:11:37 -05:00
nand_bch.c nand: Merge BCH code from Linux nand driver 2012-01-26 16:09:02 -06:00
nand_ecc.c drivers/mtd/nand: sparse fixes 2012-11-04 11:00:38 -07:00
nand_ids.c nand: Add more NAND types from Linux nand driver 2012-01-26 16:09:02 -06:00
nand_plat.c mtd: nand_plat: add simple GPIO framework DEV_READY option 2010-07-08 16:52:12 -05:00
nand_spl_load.c drivers/mtd/nand/nand_spl_load.c: Fix GCC 4.6 warning 2011-12-07 16:02:07 -06:00
nand_spl_simple.c nand_spl_simple: store ecc data on the stack 2012-01-26 16:06:21 -06:00
nand_util.c nand: Extend nand_(read|write)_skip_bad with *actual and limit parameters 2013-04-10 15:22:22 +02:00
ndfc.c mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT 2013-04-12 07:55:03 +02:00
nomadik.c nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type 2009-02-22 17:56:50 +01:00
omap_gpmc.c omap_gpmc: add support for hw assisted BCH8 2013-04-08 11:29:05 -04:00
s3c2410_nand.c GCC4.6: Use debug() instead of debugX() in s3c24xx_nand.c 2011-10-27 23:54:08 +02:00
tegra_nand.c tegra: nand: make ONFI detection work 2012-10-29 09:07:05 -07:00
tegra_nand.h tegra: nand: Add Tegra NAND driver 2012-09-07 13:54:31 -07:00