Peng Fan 47f73504d8 arm: imx: add i.MX6SLL EVK board support ... Add i.MX6SLL EVK board support. 1. Add imx6sll-evk device tree. 2. Enable SDHC/I2C/UART. 3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver. Boot Log: U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800) CPU: Freescale i.MX6SLL rev1.0 at 792MHz CPU: Commercial temperature grade (0C to 95C)Reset cause: POR Model: Freescale i.MX6SLL EVK Board Board: MX6SLL EVK DRAM: 2 GiB i2c bus 0 at 35258368, no gpio pinctrl state. PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>		2016-12-16 11:38:24 +01:00
..
clock.c	imx: mx6sll: add clock support	2016-12-16 11:38:24 +01:00
ddr.c	ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines	2016-11-29 16:40:37 +01:00
Kconfig	arm: imx: add i.MX6SLL EVK board support	2016-12-16 11:38:24 +01:00
Makefile	imx: hab: rework secure boot support for imx6	2015-10-30 15:20:57 +01:00
mp.c	treewide: replace #include <asm/errno.h> with <linux/errno.h>	2016-09-23 17:55:42 -04:00
soc.c	imx: mx6ull: update the REFTOP_VBGADJ setting	2016-11-16 20:53:55 +01:00