mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-13 08:27:23 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
||
|---|---|---|
| .. | ||
| ddr.c | ||
| ddr.h | ||
| eth.c | ||
| Kconfig | ||
| ls1046aqds.c | ||
| ls1046aqds_pbi.cfg | ||
| ls1046aqds_qixis.h | ||
| ls1046aqds_rcw_nand.cfg | ||
| ls1046aqds_rcw_sd_ifc.cfg | ||
| ls1046aqds_rcw_sd_qspi.cfg | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Overview
--------
The LS1046A Development System (QDS) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1046A
LayerScape Architecture processor. The LS1046AQDS provides SW development
platform for the Freescale LS1046A processor series, with a complete
debugging environment.
LS1046A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
SoC overview.
LS1046AQDS board Overview
-----------------------
- SERDES Connections, 8 lanes supporting:
- PCI Express - 3.0
- SGMII, SGMII 2.5
- QSGMII
- SATA 3.0
- XFI
- DDR Controller
- 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
-IFC/Local Bus
- One in-socket 128 MB NOR flash 16-bit data bus
- One 512 MB NAND flash with ECC support
- PromJet Port
- FPGA connection
- USB 3.0
- Three high speed USB 3.0 ports
- First USB 3.0 port configured as Host with Type-A connector
- The other two USB 3.0 ports configured as OTG with micro-AB connector
- SDHC port connects directly to an adapter card slot, featuring:
- Optional clock feedback paths, and optional high-speed voltage translation assistance
- SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC
- eMMC memory devices
- DSPI: Onboard support for three SPI flash memory devices
- 4 I2C controllers
- One SATA onboard connectors
- UART
- Two 4-pin serial ports at up to 115.2 Kbit/s
- Two DB9 D-Type connectors supporting one Serial port each
- ARM JTAG support
Memory map from core's view
----------------------------
Start Address End Address Description Size
0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
0x00_6000_0000 - 0x00_67FF_FFFF IFC - NOR Flash 128MB
0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - FPGA 4KB
0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB
0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M
0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M
0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB
0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G
0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G
0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G
Booting Options
---------------
a) Promjet Boot
b) NOR boot
c) NAND boot
d) SD boot
e) QSPI boot