u-boot/arch/arm/dts/socfpga_cyclone5_sockit.dts
Marek Vasut 952caa289e arm: socfpga: Add support for Terasic SoCkit board
Add support for Terasic SoCkit, which is CycloneV based board.
The board can boot either from SD/MMC or QSPI. Ethernet is also
supported.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-09-04 11:54:21 +02:00

92 lines
1.4 KiB
Text

/*
* Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include "socfpga_cyclone5.dtsi"
/ {
model = "Terasic SoCkit";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
bootargs = "console=ttyS0,115200";
};
aliases {
ethernet0 = &gmac1;
};
memory {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
soc {
u-boot,dm-pre-reloc;
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txen-skew-ps = <0>;
txc-skew-ps = <2600>;
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&i2c0 {
status = "okay";
rtc: rtc@68 {
compatible = "stm,m41t82";
reg = <0x68>;
};
};
&mmc0 {
status = "okay";
u-boot,dm-pre-reloc;
};
&qspi {
status = "okay";
u-boot,dm-pre-reloc;
flash0: n25q00@0 {
u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q00", "spi-flash";
reg = <0>; /* chip select */
spi-max-frequency = <50000000>;
m25p,fast-read;
page-size = <256>;
block-size = <16>; /* 2^16, 64KB */
read-delay = <4>; /* delay value in read data capture register */
tshsl-ns = <50>;
tsd2d-ns = <50>;
tchsh-ns = <4>;
tslch-ns = <4>;
};
};