mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
d1998a9fde
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
445 lines
9.8 KiB
C
445 lines
9.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2019
|
|
* Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <ram.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
|
|
/* SDRAM Command Code */
|
|
#define SD_CC_ARD 0x0 /* Master Bus (AXI) command - Read */
|
|
#define SD_CC_AWR 0x1 /* Master Bus (AXI) command - Write */
|
|
#define SD_CC_IRD 0x8 /* IP command - Read */
|
|
#define SD_CC_IWR 0x9 /* IP command - Write */
|
|
#define SD_CC_IMS 0xA /* IP command - Set Mode Register */
|
|
#define SD_CC_IACT 0xB /* IP command - ACTIVE */
|
|
#define SD_CC_IAF 0xC /* IP command - Auto Refresh */
|
|
#define SD_CC_ISF 0xD /* IP Command - Self Refresh */
|
|
#define SD_CC_IPRE 0xE /* IP command - Precharge */
|
|
#define SD_CC_IPREA 0xF /* IP command - Precharge ALL */
|
|
|
|
#define SEMC_MCR_MDIS BIT(1)
|
|
#define SEMC_MCR_DQSMD BIT(2)
|
|
|
|
#define SEMC_INTR_IPCMDERR BIT(1)
|
|
#define SEMC_INTR_IPCMDDONE BIT(0)
|
|
|
|
#define SEMC_IPCMD_KEY 0xA55A0000
|
|
|
|
struct imxrt_semc_regs {
|
|
/* 0x0 */
|
|
u32 mcr;
|
|
u32 iocr;
|
|
u32 bmcr0;
|
|
u32 bmcr1;
|
|
u32 br[9];
|
|
|
|
/* 0x34 */
|
|
u32 res1;
|
|
u32 inten;
|
|
u32 intr;
|
|
/* 0x40 */
|
|
u32 sdramcr0;
|
|
u32 sdramcr1;
|
|
u32 sdramcr2;
|
|
u32 sdramcr3;
|
|
/* 0x50 */
|
|
u32 nandcr0;
|
|
u32 nandcr1;
|
|
u32 nandcr2;
|
|
u32 nandcr3;
|
|
/* 0x60 */
|
|
u32 norcr0;
|
|
u32 norcr1;
|
|
u32 norcr2;
|
|
u32 norcr3;
|
|
/* 0x70 */
|
|
u32 sramcr0;
|
|
u32 sramcr1;
|
|
u32 sramcr2;
|
|
u32 sramcr3;
|
|
/* 0x80 */
|
|
u32 dbicr0;
|
|
u32 dbicr1;
|
|
u32 res2[2];
|
|
/* 0x90 */
|
|
u32 ipcr0;
|
|
u32 ipcr1;
|
|
u32 ipcr2;
|
|
u32 ipcmd;
|
|
/* 0xA0 */
|
|
u32 iptxdat;
|
|
u32 res3[3];
|
|
/* 0xB0 */
|
|
u32 iprxdat;
|
|
u32 res4[3];
|
|
/* 0xC0 */
|
|
u32 sts[16];
|
|
};
|
|
|
|
#define SEMC_IOCR_MUX_A8_SHIFT 0
|
|
#define SEMC_IOCR_MUX_CSX0_SHIFT 3
|
|
#define SEMC_IOCR_MUX_CSX1_SHIFT 6
|
|
#define SEMC_IOCR_MUX_CSX2_SHIFT 9
|
|
#define SEMC_IOCR_MUX_CSX3_SHIFT 12
|
|
#define SEMC_IOCR_MUX_RDY_SHIFT 15
|
|
|
|
struct imxrt_sdram_mux {
|
|
u8 a8;
|
|
u8 csx0;
|
|
u8 csx1;
|
|
u8 csx2;
|
|
u8 csx3;
|
|
u8 rdy;
|
|
};
|
|
|
|
#define SEMC_SDRAMCR0_PS_SHIFT 0
|
|
#define SEMC_SDRAMCR0_BL_SHIFT 4
|
|
#define SEMC_SDRAMCR0_COL_SHIFT 8
|
|
#define SEMC_SDRAMCR0_CL_SHIFT 10
|
|
|
|
struct imxrt_sdram_control {
|
|
u8 memory_width;
|
|
u8 burst_len;
|
|
u8 no_columns;
|
|
u8 cas_latency;
|
|
};
|
|
|
|
#define SEMC_SDRAMCR1_PRE2ACT_SHIFT 0
|
|
#define SEMC_SDRAMCR1_ACT2RW_SHIFT 4
|
|
#define SEMC_SDRAMCR1_RFRC_SHIFT 8
|
|
#define SEMC_SDRAMCR1_WRC_SHIFT 13
|
|
#define SEMC_SDRAMCR1_CKEOFF_SHIFT 16
|
|
#define SEMC_SDRAMCR1_ACT2PRE_SHIFT 20
|
|
|
|
#define SEMC_SDRAMCR2_SRRC_SHIFT 0
|
|
#define SEMC_SDRAMCR2_REF2REF_SHIFT 8
|
|
#define SEMC_SDRAMCR2_ACT2ACT_SHIFT 16
|
|
#define SEMC_SDRAMCR2_ITO_SHIFT 24
|
|
|
|
#define SEMC_SDRAMCR3_REN BIT(0)
|
|
#define SEMC_SDRAMCR3_REBL_SHIFT 1
|
|
#define SEMC_SDRAMCR3_PRESCALE_SHIFT 8
|
|
#define SEMC_SDRAMCR3_RT_SHIFT 16
|
|
#define SEMC_SDRAMCR3_UT_SHIFT 24
|
|
|
|
struct imxrt_sdram_timing {
|
|
u8 pre2act;
|
|
u8 act2rw;
|
|
u8 rfrc;
|
|
u8 wrc;
|
|
u8 ckeoff;
|
|
u8 act2pre;
|
|
|
|
u8 srrc;
|
|
u8 ref2ref;
|
|
u8 act2act;
|
|
u8 ito;
|
|
|
|
u8 rebl;
|
|
u8 prescale;
|
|
u8 rt;
|
|
u8 ut;
|
|
};
|
|
|
|
enum imxrt_semc_bank {
|
|
SDRAM_BANK1,
|
|
SDRAM_BANK2,
|
|
SDRAM_BANK3,
|
|
SDRAM_BANK4,
|
|
MAX_SDRAM_BANK,
|
|
};
|
|
|
|
#define SEMC_BR_VLD_MASK 1
|
|
#define SEMC_BR_MS_SHIFT 1
|
|
|
|
struct bank_params {
|
|
enum imxrt_semc_bank target_bank;
|
|
u32 base_address;
|
|
u32 memory_size;
|
|
};
|
|
|
|
struct imxrt_sdram_params {
|
|
struct imxrt_semc_regs *base;
|
|
|
|
struct imxrt_sdram_mux *sdram_mux;
|
|
struct imxrt_sdram_control *sdram_control;
|
|
struct imxrt_sdram_timing *sdram_timing;
|
|
|
|
struct bank_params bank_params[MAX_SDRAM_BANK];
|
|
u8 no_sdram_banks;
|
|
};
|
|
|
|
static int imxrt_sdram_wait_ipcmd_done(struct imxrt_semc_regs *regs)
|
|
{
|
|
do {
|
|
readl(®s->intr);
|
|
|
|
if (regs->intr & SEMC_INTR_IPCMDDONE)
|
|
return 0;
|
|
if (regs->intr & SEMC_INTR_IPCMDERR)
|
|
return -EIO;
|
|
|
|
mdelay(50);
|
|
} while (1);
|
|
}
|
|
|
|
static int imxrt_sdram_ipcmd(struct imxrt_semc_regs *regs, u32 mem_addr,
|
|
u32 ipcmd, u32 wd, u32 *rd)
|
|
{
|
|
int ret;
|
|
|
|
if (ipcmd == SD_CC_IWR || ipcmd == SD_CC_IMS)
|
|
writel(wd, ®s->iptxdat);
|
|
|
|
/* set slave address for every command as specified on RM */
|
|
writel(mem_addr, ®s->ipcr0);
|
|
|
|
/* execute command */
|
|
writel(SEMC_IPCMD_KEY | ipcmd, ®s->ipcmd);
|
|
|
|
ret = imxrt_sdram_wait_ipcmd_done(regs);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ipcmd == SD_CC_IRD) {
|
|
if (!rd)
|
|
return -EINVAL;
|
|
|
|
*rd = readl(®s->iprxdat);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int imxrt_sdram_init(struct udevice *dev)
|
|
{
|
|
struct imxrt_sdram_params *params = dev_get_plat(dev);
|
|
struct imxrt_sdram_mux *mux = params->sdram_mux;
|
|
struct imxrt_sdram_control *ctrl = params->sdram_control;
|
|
struct imxrt_sdram_timing *time = params->sdram_timing;
|
|
struct imxrt_semc_regs *regs = params->base;
|
|
struct bank_params *bank_params;
|
|
u32 rd;
|
|
int i;
|
|
|
|
/* enable the SEMC controller */
|
|
clrbits_le32(®s->mcr, SEMC_MCR_MDIS);
|
|
/* set DQS mode from DQS pad */
|
|
setbits_le32(®s->mcr, SEMC_MCR_DQSMD);
|
|
|
|
for (i = 0, bank_params = params->bank_params;
|
|
i < params->no_sdram_banks; bank_params++,
|
|
i++)
|
|
writel((bank_params->base_address & 0xfffff000)
|
|
| bank_params->memory_size << SEMC_BR_MS_SHIFT
|
|
| SEMC_BR_VLD_MASK,
|
|
®s->br[bank_params->target_bank]);
|
|
|
|
writel(mux->a8 << SEMC_IOCR_MUX_A8_SHIFT
|
|
| mux->csx0 << SEMC_IOCR_MUX_CSX0_SHIFT
|
|
| mux->csx1 << SEMC_IOCR_MUX_CSX1_SHIFT
|
|
| mux->csx2 << SEMC_IOCR_MUX_CSX2_SHIFT
|
|
| mux->csx3 << SEMC_IOCR_MUX_CSX3_SHIFT
|
|
| mux->rdy << SEMC_IOCR_MUX_RDY_SHIFT,
|
|
®s->iocr);
|
|
|
|
writel(ctrl->memory_width << SEMC_SDRAMCR0_PS_SHIFT
|
|
| ctrl->burst_len << SEMC_SDRAMCR0_BL_SHIFT
|
|
| ctrl->no_columns << SEMC_SDRAMCR0_COL_SHIFT
|
|
| ctrl->cas_latency << SEMC_SDRAMCR0_CL_SHIFT,
|
|
®s->sdramcr0);
|
|
|
|
writel(time->pre2act << SEMC_SDRAMCR1_PRE2ACT_SHIFT
|
|
| time->act2rw << SEMC_SDRAMCR1_ACT2RW_SHIFT
|
|
| time->rfrc << SEMC_SDRAMCR1_RFRC_SHIFT
|
|
| time->wrc << SEMC_SDRAMCR1_WRC_SHIFT
|
|
| time->ckeoff << SEMC_SDRAMCR1_CKEOFF_SHIFT
|
|
| time->act2pre << SEMC_SDRAMCR1_ACT2PRE_SHIFT,
|
|
®s->sdramcr1);
|
|
|
|
writel(time->srrc << SEMC_SDRAMCR2_SRRC_SHIFT
|
|
| time->ref2ref << SEMC_SDRAMCR2_REF2REF_SHIFT
|
|
| time->act2act << SEMC_SDRAMCR2_ACT2ACT_SHIFT
|
|
| time->ito << SEMC_SDRAMCR2_ITO_SHIFT,
|
|
®s->sdramcr2);
|
|
|
|
writel(time->rebl << SEMC_SDRAMCR3_REBL_SHIFT
|
|
| time->prescale << SEMC_SDRAMCR3_PRESCALE_SHIFT
|
|
| time->rt << SEMC_SDRAMCR3_RT_SHIFT
|
|
| time->ut << SEMC_SDRAMCR3_UT_SHIFT
|
|
| SEMC_SDRAMCR3_REN,
|
|
®s->sdramcr3);
|
|
|
|
writel(2, ®s->ipcr1);
|
|
|
|
for (i = 0, bank_params = params->bank_params;
|
|
i < params->no_sdram_banks; bank_params++,
|
|
i++) {
|
|
mdelay(250);
|
|
imxrt_sdram_ipcmd(regs, bank_params->base_address, SD_CC_IPREA,
|
|
0, &rd);
|
|
imxrt_sdram_ipcmd(regs, bank_params->base_address, SD_CC_IAF,
|
|
0, &rd);
|
|
imxrt_sdram_ipcmd(regs, bank_params->base_address, SD_CC_IAF,
|
|
0, &rd);
|
|
imxrt_sdram_ipcmd(regs, bank_params->base_address, SD_CC_IMS,
|
|
ctrl->burst_len | (ctrl->cas_latency << 4),
|
|
&rd);
|
|
mdelay(250);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imxrt_semc_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct imxrt_sdram_params *params = dev_get_plat(dev);
|
|
ofnode bank_node;
|
|
u8 bank = 0;
|
|
|
|
params->sdram_mux =
|
|
(struct imxrt_sdram_mux *)
|
|
dev_read_u8_array_ptr(dev,
|
|
"fsl,sdram-mux",
|
|
sizeof(struct imxrt_sdram_mux));
|
|
if (!params->sdram_mux) {
|
|
pr_err("fsl,sdram-mux not found");
|
|
return -EINVAL;
|
|
}
|
|
|
|
params->sdram_control =
|
|
(struct imxrt_sdram_control *)
|
|
dev_read_u8_array_ptr(dev,
|
|
"fsl,sdram-control",
|
|
sizeof(struct imxrt_sdram_control));
|
|
if (!params->sdram_control) {
|
|
pr_err("fsl,sdram-control not found");
|
|
return -EINVAL;
|
|
}
|
|
|
|
params->sdram_timing =
|
|
(struct imxrt_sdram_timing *)
|
|
dev_read_u8_array_ptr(dev,
|
|
"fsl,sdram-timing",
|
|
sizeof(struct imxrt_sdram_timing));
|
|
if (!params->sdram_timing) {
|
|
pr_err("fsl,sdram-timing not found");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_for_each_subnode(bank_node, dev) {
|
|
struct bank_params *bank_params;
|
|
char *bank_name;
|
|
int ret;
|
|
|
|
/* extract the bank index from DT */
|
|
bank_name = (char *)ofnode_get_name(bank_node);
|
|
strsep(&bank_name, "@");
|
|
if (!bank_name) {
|
|
pr_err("missing sdram bank index");
|
|
return -EINVAL;
|
|
}
|
|
|
|
bank_params = ¶ms->bank_params[bank];
|
|
strict_strtoul(bank_name, 10,
|
|
(unsigned long *)&bank_params->target_bank);
|
|
if (bank_params->target_bank >= MAX_SDRAM_BANK) {
|
|
pr_err("Found bank %d , but only bank 0,1,2,3 are supported",
|
|
bank_params->target_bank);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = ofnode_read_u32(bank_node,
|
|
"fsl,memory-size",
|
|
&bank_params->memory_size);
|
|
if (ret < 0) {
|
|
pr_err("fsl,memory-size not found");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = ofnode_read_u32(bank_node,
|
|
"fsl,base-address",
|
|
&bank_params->base_address);
|
|
if (ret < 0) {
|
|
pr_err("fsl,base-address not found");
|
|
return -EINVAL;
|
|
}
|
|
|
|
debug("Found bank %s %u\n", bank_name,
|
|
bank_params->target_bank);
|
|
bank++;
|
|
}
|
|
|
|
params->no_sdram_banks = bank;
|
|
debug("%s, no of banks = %d\n", __func__, params->no_sdram_banks);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imxrt_semc_probe(struct udevice *dev)
|
|
{
|
|
struct imxrt_sdram_params *params = dev_get_plat(dev);
|
|
int ret;
|
|
fdt_addr_t addr;
|
|
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
params->base = (struct imxrt_semc_regs *)addr;
|
|
|
|
#ifdef CONFIG_CLK
|
|
struct clk clk;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
#endif
|
|
ret = imxrt_sdram_init(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imxrt_semc_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops imxrt_semc_ops = {
|
|
.get_info = imxrt_semc_get_info,
|
|
};
|
|
|
|
static const struct udevice_id imxrt_semc_ids[] = {
|
|
{ .compatible = "fsl,imxrt-semc", .data = 0 },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(imxrt_semc) = {
|
|
.name = "imxrt_semc",
|
|
.id = UCLASS_RAM,
|
|
.of_match = imxrt_semc_ids,
|
|
.ops = &imxrt_semc_ops,
|
|
.of_to_plat = imxrt_semc_of_to_plat,
|
|
.probe = imxrt_semc_probe,
|
|
.plat_auto = sizeof(struct imxrt_sdram_params),
|
|
};
|