mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
01c67a381c
This driver supports NXP C45 TJA11XX PHYs, but there're also other NXP TJA11XX PHYs. Let's rename functions in this driver to be c45 variant specific, so further drivers can be introduced adding support for NXP TJA11XX PHYs. Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
348 lines
8.4 KiB
C
348 lines
8.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* NXP C45 PHY driver
|
|
*
|
|
* Copyright 2021 NXP
|
|
* Author: Radu Pirea <radu-nicolae.pirea@oss.nxp.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/devres.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/mdio.h>
|
|
#include <phy.h>
|
|
|
|
#define PHY_ID_TJA_1103 0x001BB010
|
|
|
|
#define VEND1_DEVICE_CONTROL 0x0040
|
|
#define DEVICE_CONTROL_RESET BIT(15)
|
|
#define DEVICE_CONTROL_CONFIG_GLOBAL_EN BIT(14)
|
|
#define DEVICE_CONTROL_CONFIG_ALL_EN BIT(13)
|
|
|
|
#define VEND1_PORT_CONTROL 0x8040
|
|
#define PORT_CONTROL_EN BIT(14)
|
|
|
|
#define VEND1_PHY_CONTROL 0x8100
|
|
#define PHY_CONFIG_EN BIT(14)
|
|
#define PHY_START_OP BIT(0)
|
|
|
|
#define VEND1_PHY_CONFIG 0x8108
|
|
#define PHY_CONFIG_AUTO BIT(0)
|
|
|
|
#define VEND1_PORT_INFRA_CONTROL 0xAC00
|
|
#define PORT_INFRA_CONTROL_EN BIT(14)
|
|
|
|
#define VEND1_RXID 0xAFCC
|
|
#define VEND1_TXID 0xAFCD
|
|
#define ID_ENABLE BIT(15)
|
|
|
|
#define VEND1_ABILITIES 0xAFC4
|
|
#define RGMII_ID_ABILITY BIT(15)
|
|
#define RGMII_ABILITY BIT(14)
|
|
#define RMII_ABILITY BIT(10)
|
|
#define REVMII_ABILITY BIT(9)
|
|
#define MII_ABILITY BIT(8)
|
|
#define SGMII_ABILITY BIT(0)
|
|
|
|
#define VEND1_MII_BASIC_CONFIG 0xAFC6
|
|
#define MII_BASIC_CONFIG_REV BIT(8)
|
|
#define MII_BASIC_CONFIG_SGMII 0x9
|
|
#define MII_BASIC_CONFIG_RGMII 0x7
|
|
#define MII_BASIC_CONFIG_RMII 0x5
|
|
#define MII_BASIC_CONFIG_MII 0x4
|
|
|
|
#define RGMII_PERIOD_PS 8000U
|
|
#define PS_PER_DEGREE div_u64(RGMII_PERIOD_PS, 360)
|
|
#define MIN_ID_PS 1644U
|
|
#define MAX_ID_PS 2260U
|
|
#define DEFAULT_ID_PS 2000U
|
|
|
|
#define RESET_DELAY_MS 25
|
|
#define CONF_EN_DELAY_US 450
|
|
|
|
struct nxp_c45_phy {
|
|
u32 tx_delay;
|
|
u32 rx_delay;
|
|
};
|
|
|
|
static int nxp_c45_soft_reset(struct phy_device *phydev)
|
|
{
|
|
int tries = 10, ret;
|
|
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL,
|
|
DEVICE_CONTROL_RESET);
|
|
if (ret)
|
|
return ret;
|
|
|
|
do {
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
|
|
VEND1_DEVICE_CONTROL);
|
|
if (!(ret & DEVICE_CONTROL_RESET))
|
|
return 0;
|
|
mdelay(RESET_DELAY_MS);
|
|
} while (tries--);
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int nxp_c45_start_op(struct phy_device *phydev)
|
|
{
|
|
return phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL,
|
|
PHY_START_OP);
|
|
}
|
|
|
|
static int nxp_c45_config_enable(struct phy_device *phydev)
|
|
{
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL,
|
|
DEVICE_CONTROL_CONFIG_GLOBAL_EN |
|
|
DEVICE_CONTROL_CONFIG_ALL_EN);
|
|
udelay(CONF_EN_DELAY_US);
|
|
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_CONTROL,
|
|
PORT_CONTROL_EN);
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL,
|
|
PHY_CONFIG_EN);
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_INFRA_CONTROL,
|
|
PORT_INFRA_CONTROL_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64 nxp_c45_get_phase_shift(u64 phase_offset_raw)
|
|
{
|
|
/* The delay in degree phase is 73.8 + phase_offset_raw * 0.9.
|
|
* To avoid floating point operations we'll multiply by 10
|
|
* and get 1 decimal point precision.
|
|
*/
|
|
phase_offset_raw *= 10;
|
|
phase_offset_raw -= 738;
|
|
return div_u64(phase_offset_raw, 9);
|
|
}
|
|
|
|
static void nxp_c45_disable_delays(struct phy_device *phydev)
|
|
{
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0);
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0);
|
|
}
|
|
|
|
static int nxp_c45_check_delay(struct phy_device *phydev, u32 delay)
|
|
{
|
|
if (delay < MIN_ID_PS) {
|
|
pr_err("%s: delay value smaller than %u\n",
|
|
phydev->drv->name, MIN_ID_PS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (delay > MAX_ID_PS) {
|
|
pr_err("%s: delay value higher than %u\n",
|
|
phydev->drv->name, MAX_ID_PS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nxp_c45_get_delays(struct phy_device *phydev)
|
|
{
|
|
struct nxp_c45_phy *priv = phydev->priv;
|
|
int ret;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
|
|
ret = dev_read_u32(phydev->dev, "tx-internal-delay-ps",
|
|
&priv->tx_delay);
|
|
if (ret)
|
|
priv->tx_delay = DEFAULT_ID_PS;
|
|
|
|
ret = nxp_c45_check_delay(phydev, priv->tx_delay);
|
|
if (ret) {
|
|
pr_err("%s: tx-internal-delay-ps invalid value\n",
|
|
phydev->drv->name);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
|
|
ret = dev_read_u32(phydev->dev, "rx-internal-delay-ps",
|
|
&priv->rx_delay);
|
|
if (ret)
|
|
priv->rx_delay = DEFAULT_ID_PS;
|
|
|
|
ret = nxp_c45_check_delay(phydev, priv->rx_delay);
|
|
if (ret) {
|
|
pr_err("%s: rx-internal-delay-ps invalid value\n",
|
|
phydev->drv->name);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nxp_c45_set_delays(struct phy_device *phydev)
|
|
{
|
|
struct nxp_c45_phy *priv = phydev->priv;
|
|
u64 tx_delay = priv->tx_delay;
|
|
u64 rx_delay = priv->rx_delay;
|
|
u64 degree;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
|
|
degree = div_u64(tx_delay, PS_PER_DEGREE);
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID,
|
|
ID_ENABLE | nxp_c45_get_phase_shift(degree));
|
|
} else {
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0);
|
|
}
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
|
|
degree = div_u64(rx_delay, PS_PER_DEGREE);
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID,
|
|
ID_ENABLE | nxp_c45_get_phase_shift(degree));
|
|
} else {
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0);
|
|
}
|
|
}
|
|
|
|
static int nxp_c45_set_phy_mode(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_ABILITIES);
|
|
pr_debug("%s: Clause 45 managed PHY abilities 0x%x\n",
|
|
phydev->drv->name, ret);
|
|
|
|
switch (phydev->interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
if (!(ret & RGMII_ABILITY)) {
|
|
pr_err("%s: rgmii mode not supported\n",
|
|
phydev->drv->name);
|
|
return -EINVAL;
|
|
}
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
|
MII_BASIC_CONFIG_RGMII);
|
|
nxp_c45_disable_delays(phydev);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
if (!(ret & RGMII_ID_ABILITY)) {
|
|
pr_err("%s: rgmii-id, rgmii-txid, rgmii-rxid modes are not supported\n",
|
|
phydev->drv->name);
|
|
return -EINVAL;
|
|
}
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
|
MII_BASIC_CONFIG_RGMII);
|
|
ret = nxp_c45_get_delays(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
nxp_c45_set_delays(phydev);
|
|
break;
|
|
case PHY_INTERFACE_MODE_MII:
|
|
if (!(ret & MII_ABILITY)) {
|
|
pr_err("%s: mii mode not supported\n",
|
|
phydev->drv->name);
|
|
return -EINVAL;
|
|
}
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
|
MII_BASIC_CONFIG_MII);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
if (!(ret & RMII_ABILITY)) {
|
|
pr_err("%s: rmii mode not supported\n",
|
|
phydev->drv->name);
|
|
return -EINVAL;
|
|
}
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
|
MII_BASIC_CONFIG_RMII);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
if (!(ret & SGMII_ABILITY)) {
|
|
pr_err("%s: sgmii mode not supported\n",
|
|
phydev->drv->name);
|
|
return -EINVAL;
|
|
}
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
|
|
MII_BASIC_CONFIG_SGMII);
|
|
break;
|
|
case PHY_INTERFACE_MODE_INTERNAL:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nxp_c45_config(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = nxp_c45_soft_reset(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = nxp_c45_config_enable(phydev);
|
|
if (ret) {
|
|
pr_err("%s: Failed to enable config\n", phydev->drv->name);
|
|
return ret;
|
|
}
|
|
|
|
phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG,
|
|
PHY_CONFIG_AUTO);
|
|
|
|
ret = nxp_c45_set_phy_mode(phydev);
|
|
if (ret) {
|
|
pr_err("%s: Failed to set phy mode\n", phydev->drv->name);
|
|
return ret;
|
|
}
|
|
|
|
phydev->autoneg = AUTONEG_DISABLE;
|
|
|
|
return nxp_c45_start_op(phydev);
|
|
}
|
|
|
|
static int nxp_c45_startup(struct phy_device *phydev)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1);
|
|
phydev->link = !!(reg & MDIO_STAT1_LSTATUS);
|
|
phydev->speed = SPEED_100;
|
|
phydev->duplex = DUPLEX_FULL;
|
|
return 0;
|
|
}
|
|
|
|
static int nxp_c45_probe(struct phy_device *phydev)
|
|
{
|
|
struct nxp_c45_phy *priv;
|
|
|
|
priv = devm_kzalloc(phydev->priv, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = priv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver nxp_c45_tja11xx = {
|
|
.name = "NXP C45 TJA1103",
|
|
.uid = PHY_ID_TJA_1103,
|
|
.mask = 0xfffff0,
|
|
.features = PHY_100BT1_FEATURES,
|
|
.probe = &nxp_c45_probe,
|
|
.config = &nxp_c45_config,
|
|
.startup = &nxp_c45_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
int phy_nxp_c45_tja11xx_init(void)
|
|
{
|
|
phy_register(&nxp_c45_tja11xx);
|
|
return 0;
|
|
}
|