u-boot/arch/arm/dts/imx8mm-verdin-wifi.dtsi
Marcel Ziswiler a68bad0a37 imx8mm-mx8menlo/verdin-imx8mm: synchronise device tree with linux
Synchronise device tree with linux v5.19-rc5.

Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device tree we are now using the
regular one for the Verdin Development (carrier) board (e.g.
imx8mm-verdin-wifi-dev.dtb rather than the previous imx8mm-verdin.dtb).

Please further note that the PMIC node name got changed from a pmic
label to pmic@25 which required adjustment in resp. board SPL file
board/toradex/verdin-imx8mm/spl.c.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-07-25 16:12:00 +02:00

94 lines
1.7 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2022 Toradex
*/
/ {
reg_wifi_en: regulator-wifi-en {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_pwr_en>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "PDn_AW-CM276NF";
startup-delay-us = <2000>;
};
};
&gpio3 {
gpio-line-names = "SODIMM_52",
"SODIMM_54",
"SODIMM_64",
"SODIMM_21",
"SODIMM_206",
"SODIMM_76",
"SODIMM_56",
"SODIMM_58",
"SODIMM_60",
"SODIMM_62",
"",
"",
"",
"",
"SODIMM_66",
"SODIMM_17",
"",
"",
"",
"SODIMM_244",
"",
"SODIMM_48",
"SODIMM_44",
"SODIMM_42",
"SODIMM_46";
};
&gpio4 {
gpio-line-names = "SODIMM_102",
"SODIMM_90",
"SODIMM_92",
"SODIMM_94",
"SODIMM_96",
"SODIMM_100",
"",
"",
"",
"",
"SODIMM_120",
"SODIMM_104",
"SODIMM_106",
"SODIMM_108",
"SODIMM_112",
"SODIMM_114",
"SODIMM_116",
"",
"SODIMM_118",
"",
"SODIMM_88",
"SODIMM_149",
"SODIMM_147",
"SODIMM_36",
"SODIMM_32",
"SODIMM_30",
"SODIMM_34",
"SODIMM_38",
"SODIMM_252",
"SODIMM_133",
"SODIMM_135",
"SODIMM_129";
};
/* On-module Wi-Fi */
&usdhc3 {
bus-width = <4>;
keep-power-in-suspend;
non-removable;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
vmmc-supply = <&reg_wifi_en>;
status = "okay";
};