mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
237e5880f8
This adds SoC-specific compatible strings to all users of the designware spi device. This will allow for the correct driver to be selected for each device. Where it is publicly documented, a compatible string for the specific device version has also been added. Devices without publicly-documented device versions include MSCC SoCs, and Arc Socs. All compatible strings except those for SoCFPGAs and some of the versioned strings have been taken from Linux. Since SSI_MAX_XFER_SIZE is determined at runtime, this is not strictly necessary. However, it is a good cleanup and brings things closer to Linux. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
624 lines
15 KiB
Text
624 lines
15 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2019, Intel Corporation
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/reset/altr,rst-mgr-s10.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/clock/agilex-clock.h>
|
|
|
|
/ {
|
|
compatible = "intel,socfpga-agilex";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
service_reserved: svcbuffer@0 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0x0 0x0 0x0 0x1000000>;
|
|
alignment = <0x1000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
reg = <0x0>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
reg = <0x1>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
reg = <0x2>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
reg = <0x3>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,armv8-pmuv3";
|
|
interrupts = <0 170 4>,
|
|
<0 171 4>,
|
|
<0 172 4>,
|
|
<0 173 4>;
|
|
interrupt-affinity = <&cpu0>,
|
|
<&cpu1>,
|
|
<&cpu2>,
|
|
<&cpu3>;
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
intc: intc@fffc1000 {
|
|
compatible = "arm,gic-400", "arm,cortex-a15-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0xfffc1000 0x0 0x1000>,
|
|
<0x0 0xfffc2000 0x0 0x2000>,
|
|
<0x0 0xfffc4000 0x0 0x2000>,
|
|
<0x0 0xfffc6000 0x0 0x2000>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
device_type = "soc";
|
|
interrupt-parent = <&intc>;
|
|
ranges = <0 0 0 0xffffffff>;
|
|
|
|
base_fpga_region {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
compatible = "fpga-region";
|
|
fpga-mgr = <&fpga_mgr>;
|
|
};
|
|
|
|
clkmgr: clock-controller@ffd10000 {
|
|
compatible = "intel,agilex-clkmgr";
|
|
reg = <0xffd10000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clocks {
|
|
cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
};
|
|
|
|
cb_intosc_ls_clk: cb-intosc-ls-clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
};
|
|
|
|
f2s_free_clk: f2s-free-clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
};
|
|
|
|
osc1: osc1 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
};
|
|
|
|
qspi_clk: qspi-clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <200000000>;
|
|
};
|
|
};
|
|
gmac0: ethernet@ff800000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
|
|
reg = <0xff800000 0x2000>;
|
|
interrupts = <0 90 4>;
|
|
interrupt-names = "macirq";
|
|
mac-address = [00 00 00 00 00 00];
|
|
resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
|
|
reset-names = "stmmaceth", "stmmaceth-ocp";
|
|
tx-fifo-depth = <16384>;
|
|
rx-fifo-depth = <16384>;
|
|
snps,multicast-filter-bins = <256>;
|
|
iommus = <&smmu 1>;
|
|
altr,sysmgr-syscon = <&sysmgr 0x44 0>;
|
|
clocks = <&clkmgr AGILEX_EMAC0_CLK>;
|
|
clock-names = "stmmaceth";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac1: ethernet@ff802000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
|
|
reg = <0xff802000 0x2000>;
|
|
interrupts = <0 91 4>;
|
|
interrupt-names = "macirq";
|
|
mac-address = [00 00 00 00 00 00];
|
|
resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
|
|
reset-names = "stmmaceth", "stmmaceth-ocp";
|
|
tx-fifo-depth = <16384>;
|
|
rx-fifo-depth = <16384>;
|
|
snps,multicast-filter-bins = <256>;
|
|
iommus = <&smmu 2>;
|
|
altr,sysmgr-syscon = <&sysmgr 0x48 8>;
|
|
clocks = <&clkmgr AGILEX_EMAC1_CLK>;
|
|
clock-names = "stmmaceth";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac2: ethernet@ff804000 {
|
|
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
|
|
reg = <0xff804000 0x2000>;
|
|
interrupts = <0 92 4>;
|
|
interrupt-names = "macirq";
|
|
mac-address = [00 00 00 00 00 00];
|
|
resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
|
|
reset-names = "stmmaceth", "stmmaceth-ocp";
|
|
tx-fifo-depth = <16384>;
|
|
rx-fifo-depth = <16384>;
|
|
snps,multicast-filter-bins = <256>;
|
|
iommus = <&smmu 3>;
|
|
altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
|
|
clocks = <&clkmgr AGILEX_EMAC2_CLK>;
|
|
clock-names = "stmmaceth";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@ffc03200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xffc03200 0x100>;
|
|
resets = <&rst GPIO0_RESET>;
|
|
status = "disabled";
|
|
|
|
porta: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <24>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 110 4>;
|
|
};
|
|
};
|
|
|
|
gpio1: gpio@ffc03300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xffc03300 0x100>;
|
|
resets = <&rst GPIO1_RESET>;
|
|
status = "disabled";
|
|
|
|
portb: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <24>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 111 4>;
|
|
};
|
|
};
|
|
|
|
i2c0: i2c@ffc02800 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02800 0x100>;
|
|
interrupts = <0 103 4>;
|
|
resets = <&rst I2C0_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@ffc02900 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02900 0x100>;
|
|
interrupts = <0 104 4>;
|
|
resets = <&rst I2C1_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@ffc02a00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02a00 0x100>;
|
|
interrupts = <0 105 4>;
|
|
resets = <&rst I2C2_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@ffc02b00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02b00 0x100>;
|
|
interrupts = <0 106 4>;
|
|
resets = <&rst I2C3_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@ffc02c00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0xffc02c00 0x100>;
|
|
interrupts = <0 107 4>;
|
|
resets = <&rst I2C4_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc: dwmmc0@ff808000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "altr,socfpga-dw-mshc";
|
|
reg = <0xff808000 0x1000>;
|
|
interrupts = <0 96 4>;
|
|
fifo-depth = <0x400>;
|
|
resets = <&rst SDMMC_RESET>;
|
|
reset-names = "reset";
|
|
clocks = <&clkmgr AGILEX_L4_MP_CLK>,
|
|
<&clkmgr AGILEX_SDMMC_CLK>;
|
|
clock-names = "biu", "ciu";
|
|
iommus = <&smmu 5>;
|
|
status = "disabled";
|
|
};
|
|
|
|
nand: nand@ffb90000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "altr,socfpga-denali-nand";
|
|
reg = <0xffb90000 0x10000>,
|
|
<0xffb80000 0x1000>;
|
|
reg-names = "nand_data", "denali_reg";
|
|
interrupts = <0 97 4>;
|
|
resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ocram: sram@ffe00000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0xffe00000 0x40000>;
|
|
};
|
|
|
|
pdma: pdma@ffda0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0xffda0000 0x1000>;
|
|
interrupts = <0 81 4>,
|
|
<0 82 4>,
|
|
<0 83 4>,
|
|
<0 84 4>,
|
|
<0 85 4>,
|
|
<0 86 4>,
|
|
<0 87 4>,
|
|
<0 88 4>,
|
|
<0 89 4>;
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
|
|
reset-names = "dma", "dma-ocp";
|
|
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
rst: rstmgr@ffd11000 {
|
|
#reset-cells = <1>;
|
|
compatible = "altr,stratix10-rst-mgr";
|
|
reg = <0xffd11000 0x100>;
|
|
};
|
|
|
|
smmu: iommu@fa000000 {
|
|
compatible = "arm,mmu-500", "arm,smmu-v2";
|
|
reg = <0xfa000000 0x40000>;
|
|
#global-interrupts = <2>;
|
|
#iommu-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 128 4>, /* Global Secure Fault */
|
|
<0 129 4>, /* Global Non-secure Fault */
|
|
/* Non-secure Context Interrupts (32) */
|
|
<0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
|
|
<0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
|
|
<0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
|
|
<0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
|
|
<0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
|
|
<0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
|
|
<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
|
|
<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
|
|
stream-match-mask = <0x7ff0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@ffda4000 {
|
|
compatible = "intel,agilex-spi",
|
|
"snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xffda4000 0x1000>;
|
|
interrupts = <0 99 4>;
|
|
resets = <&rst SPIM0_RESET>;
|
|
reg-io-width = <4>;
|
|
num-cs = <4>;
|
|
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@ffda5000 {
|
|
compatible = "intel,agilex-spi",
|
|
"snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xffda5000 0x1000>;
|
|
interrupts = <0 100 4>;
|
|
resets = <&rst SPIM1_RESET>;
|
|
reg-io-width = <4>;
|
|
num-cs = <4>;
|
|
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sysmgr: sysmgr@ffd12000 {
|
|
compatible = "altr,sys-mgr-s10","altr,sys-mgr";
|
|
reg = <0xffd12000 0x500>;
|
|
};
|
|
|
|
/* Local timer */
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
};
|
|
|
|
timer0: timer0@ffc03000 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 113 4>;
|
|
reg = <0xffc03000 0x100>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
clock-names = "timer";
|
|
};
|
|
|
|
timer1: timer1@ffc03100 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 114 4>;
|
|
reg = <0xffc03100 0x100>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
clock-names = "timer";
|
|
};
|
|
|
|
timer2: timer2@ffd00000 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 115 4>;
|
|
reg = <0xffd00000 0x100>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
clock-names = "timer";
|
|
};
|
|
|
|
timer3: timer3@ffd00100 {
|
|
compatible = "snps,dw-apb-timer";
|
|
interrupts = <0 116 4>;
|
|
reg = <0xffd00100 0x100>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
clock-names = "timer";
|
|
};
|
|
|
|
uart0: serial0@ffc02000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xffc02000 0x100>;
|
|
interrupts = <0 108 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
resets = <&rst UART0_RESET>;
|
|
status = "disabled";
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
clock-frequency = <100000000>;
|
|
};
|
|
|
|
uart1: serial1@ffc02100 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xffc02100 0x100>;
|
|
interrupts = <0 109 4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
resets = <&rst UART1_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SP_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphy0: usbphy@0 {
|
|
#phy-cells = <0>;
|
|
compatible = "usb-nop-xceiv";
|
|
status = "okay";
|
|
};
|
|
|
|
usb0: usb@ffb00000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <0xffb00000 0x40000>;
|
|
interrupts = <0 93 4>;
|
|
phys = <&usbphy0>;
|
|
phy-names = "usb2-phy";
|
|
resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
|
|
reset-names = "dwc2", "dwc2-ecc";
|
|
clocks = <&clkmgr AGILEX_USB_CLK>;
|
|
iommus = <&smmu 6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@ffb40000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <0xffb40000 0x40000>;
|
|
interrupts = <0 94 4>;
|
|
phys = <&usbphy0>;
|
|
phy-names = "usb2-phy";
|
|
resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
|
|
reset-names = "dwc2", "dwc2-ecc";
|
|
iommus = <&smmu 7>;
|
|
clocks = <&clkmgr AGILEX_USB_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog0: watchdog@ffd00200 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00200 0x100>;
|
|
interrupts = <0 117 4>;
|
|
resets = <&rst WATCHDOG0_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog1: watchdog@ffd00300 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00300 0x100>;
|
|
interrupts = <0 118 4>;
|
|
resets = <&rst WATCHDOG1_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog2: watchdog@ffd00400 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00400 0x100>;
|
|
interrupts = <0 125 4>;
|
|
resets = <&rst WATCHDOG2_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog3: watchdog@ffd00500 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0xffd00500 0x100>;
|
|
interrupts = <0 126 4>;
|
|
resets = <&rst WATCHDOG3_RESET>;
|
|
clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdr: sdr@f8011100 {
|
|
compatible = "altr,sdr-ctl", "syscon";
|
|
reg = <0xf8011100 0xc0>;
|
|
};
|
|
|
|
eccmgr {
|
|
compatible = "altr,socfpga-s10-ecc-manager",
|
|
"altr,socfpga-a10-ecc-manager";
|
|
altr,sysmgr-syscon = <&sysmgr>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupts = <0 15 4>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
ranges;
|
|
|
|
sdramedac {
|
|
compatible = "altr,sdram-edac-s10";
|
|
altr,sdr-syscon = <&sdr>;
|
|
interrupts = <16 4>;
|
|
};
|
|
|
|
ocram-ecc@ff8cc000 {
|
|
compatible = "altr,socfpga-s10-ocram-ecc",
|
|
"altr,socfpga-a10-ocram-ecc";
|
|
reg = <0xff8cc000 0x100>;
|
|
altr,ecc-parent = <&ocram>;
|
|
interrupts = <1 4>;
|
|
};
|
|
|
|
usb0-ecc@ff8c4000 {
|
|
compatible = "altr,socfpga-s10-usb-ecc",
|
|
"altr,socfpga-usb-ecc";
|
|
reg = <0xff8c4000 0x100>;
|
|
altr,ecc-parent = <&usb0>;
|
|
interrupts = <2 4>;
|
|
};
|
|
|
|
emac0-rx-ecc@ff8c0000 {
|
|
compatible = "altr,socfpga-s10-eth-mac-ecc",
|
|
"altr,socfpga-eth-mac-ecc";
|
|
reg = <0xff8c0000 0x100>;
|
|
altr,ecc-parent = <&gmac0>;
|
|
interrupts = <4 4>;
|
|
};
|
|
|
|
emac0-tx-ecc@ff8c0400 {
|
|
compatible = "altr,socfpga-s10-eth-mac-ecc",
|
|
"altr,socfpga-eth-mac-ecc";
|
|
reg = <0xff8c0400 0x100>;
|
|
altr,ecc-parent = <&gmac0>;
|
|
interrupts = <5 4>;
|
|
};
|
|
|
|
sdmmca-ecc@ff8c8c00 {
|
|
compatible = "altr,socfpga-s10-sdmmc-ecc",
|
|
"altr,socfpga-sdmmc-ecc";
|
|
reg = <0xff8c8c00 0x100>;
|
|
altr,ecc-parent = <&mmc>;
|
|
interrupts = <14 4>,
|
|
<15 4>;
|
|
};
|
|
};
|
|
|
|
qspi: spi@ff8d2000 {
|
|
compatible = "cdns,qspi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0xff8d2000 0x100>,
|
|
<0xff900000 0x100000>;
|
|
interrupts = <0 3 4>;
|
|
cdns,fifo-depth = <128>;
|
|
cdns,fifo-width = <4>;
|
|
cdns,trigger-address = <0x00000000>;
|
|
clocks = <&qspi_clk>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
firmware {
|
|
svc {
|
|
compatible = "intel,stratix10-svc";
|
|
method = "smc";
|
|
memory-region = <&service_reserved>;
|
|
|
|
fpga_mgr: fpga-mgr {
|
|
compatible = "intel,stratix10-soc-fpga-mgr";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|