mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
42cef89e86
binman conversion made flashing flash.bin and u-boot.itb necessary. Update binman config to create a single flash.bin image again. This updates imx8mp_evk and phyCORE-i.MX8MP as they share the same binman config. Updated also imx8mp_evk documentation. Tested on phyCORE-i.MX8MP. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
60 lines
1.5 KiB
ReStructuredText
60 lines
1.5 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
imx8mp_evk
|
|
==========
|
|
|
|
U-Boot for the NXP i.MX8MP EVK board
|
|
|
|
Quick Start
|
|
-----------
|
|
|
|
- Build the ARM Trusted firmware binary
|
|
- Get the firmware-imx package
|
|
- Build U-Boot
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
--------------------------------------
|
|
|
|
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
|
|
branch: imx_5.4.70_2.3.0
|
|
|
|
.. code-block:: bash
|
|
|
|
$ make PLAT=imx8mp bl31
|
|
|
|
Get the ddr firmware
|
|
--------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.bin
|
|
$ chmod +x firmware-imx-8.10.bin
|
|
$ ./firmware-imx-8.10.bin
|
|
|
|
Build U-Boot
|
|
------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ export CROSS_COMPILE=aarch64-poky-linux-
|
|
$ make O=build imx8mp_evk_defconfig
|
|
$ cp ../imx-atf/build/imx8mp/release/bl31.bin ./build/bl31.bin
|
|
$ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_202006.bin ./build/
|
|
$ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_202006.bin ./build/
|
|
$ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_202006.bin ./build/
|
|
$ cp ../firmware-imx-8.10/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_202006.bin ./build/
|
|
$ export ATF_LOAD_ADDR=0x970000
|
|
$ make O=build
|
|
|
|
Burn the flash.bin to the MicroSD card at offset 32KB:
|
|
|
|
.. code-block:: bash
|
|
|
|
$sudo dd if=build/flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync
|
|
|
|
Boot
|
|
----
|
|
|
|
Set Boot switch to SD boot
|
|
Use /dev/ttyUSB2 for U-Boot console
|