u-boot/configs/mscc_luton_defconfig
Gregory CLEMENT f8c8cedd7a MSCC: add board support for the Luton based evaluation board
Adding the support for the Luton boards PCB91 which share common code with
the Ocelots boards, including board code, device tree and configuration.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19 15:23:01 +01:00

64 lines
1.6 KiB
Text

CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x40000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0x70100000
CONFIG_DEBUG_UART_CLOCK=208333333
CONFIG_ARCH_MSCC=y
CONFIG_TARGET_LUTON_PCB091=y
CONFIG_DDRTYPE_MT47H128M8HQ=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
CONFIG_LOGLEVEL=7
CONFIG_DISPLAY_CPUINFO=y
CONFIG_SYS_PROMPT="pcb091 # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_DHCP=y
# CONFIG_NET_TFTP_VARS is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),6m@1m(linux)"
# CONFIG_ISO_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="luton_pcb091"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_DM_GPIO=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_DM_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SOFT_SPI=y
CONFIG_LZMA=y