u-boot/include/configs/mx6memcal.h
Tom Rini a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00

55 lines
1.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2010-2018 Freescale Semiconductor, Inc.
*
* Configuration settings for the virtual mx6memcal board.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* SPL */
#include "mx6_common.h"
#include "imx6_spl.h"
#undef CONFIG_MMC
#undef CONFIG_SPL_MMC_SUPPORT
#undef CONFIG_GENERIC_MMC
#undef CONFIG_CMD_FUSE
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
#define CONFIG_MXC_UART
#ifdef CONFIG_SERIAL_CONSOLE_UART1
#if defined(CONFIG_MX6SL)
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
#else
#define CONFIG_MXC_UART_BASE UART1_BASE
#endif
#elif defined(CONFIG_SERIAL_CONSOLE_UART2)
#define CONFIG_MXC_UART_BASE UART2_BASE
#else
#error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx)
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16)
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_MXC_USB_PORTSC PORT_PTS_UTMI
#endif /* __CONFIG_H */