mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 17:41:08 +00:00
7a0bbe64d8
Allow specifying the axp221 dcdc2 voltage via Kconfig, this is necessary because on some boards the 1.2V default does not work reliable. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
92 lines
2.7 KiB
Text
92 lines
2.7 KiB
Text
menu "Power"
|
|
|
|
source "drivers/power/pmic/Kconfig"
|
|
|
|
source "drivers/power/regulator/Kconfig"
|
|
|
|
config AXP221_POWER
|
|
boolean "axp221 / axp223 pmic support"
|
|
depends on MACH_SUN6I || MACH_SUN8I
|
|
default y
|
|
---help---
|
|
Say y here to enable support for the axp221 / axp223 pmic found on most
|
|
sun6i (A31) / sun8i (A23) boards.
|
|
|
|
config AXP221_DCDC1_VOLT
|
|
int "axp221 dcdc1 voltage"
|
|
depends on AXP221_POWER
|
|
default 3000
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dcdc1 at, set to 0 to
|
|
disable dcdc1. This is typically used as generic 3.3V IO voltage for
|
|
things like GPIO-s, sdcard interfaces, etc. On most boards this is
|
|
undervolted to 3.0V to safe battery.
|
|
|
|
config AXP221_DCDC2_VOLT
|
|
int "axp221 dcdc2 voltage"
|
|
depends on AXP221_POWER
|
|
default 1200
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dcdc2 at, set to 0 to
|
|
disable dcdc2. On A31 boards this is typically used for VDD-GPU,
|
|
on A23/A33 for VDD-SYS, this should normally be set to 1.2V.
|
|
|
|
config AXP221_DLDO1_VOLT
|
|
int "axp221 dldo1 voltage"
|
|
depends on AXP221_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dldo1 at, set to 0 to
|
|
disable dldo1. On sun6i (A31) boards with ethernet this is often used
|
|
to power the ethernet phy. On sun8i (A23) boards this is often used to
|
|
power the wifi.
|
|
|
|
config AXP221_DLDO4_VOLT
|
|
int "axp221 dldo4 voltage"
|
|
depends on AXP221_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 dldo4 at, set to 0 to
|
|
disable dldo4.
|
|
|
|
config AXP221_ALDO1_VOLT
|
|
int "axp221 aldo1 voltage"
|
|
depends on AXP221_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo1 at, set to 0 to
|
|
disable aldo1. On sun6i (A31) boards which have a wifi module this is
|
|
often used to power the wifi module.
|
|
|
|
config AXP221_ALDO2_VOLT
|
|
int "axp221 aldo2 voltage"
|
|
depends on AXP221_POWER
|
|
default 0 if MACH_SUN6I
|
|
default 2500 if MACH_SUN8I
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo2 at, set to 0 to
|
|
disable aldo2. On sun6i (A31) boards this is typically unused and
|
|
should be disabled, if it is used for LPDDR2 it should be set to 1.8V.
|
|
On sun8i (A23) this is typically connected to VDD-DLL and must be set
|
|
to 2.5V.
|
|
|
|
config AXP221_ALDO3_VOLT
|
|
int "axp221 aldo3 voltage"
|
|
depends on AXP221_POWER
|
|
default 3000
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 aldo3 at, set to 0 to
|
|
disable aldo3. This is typically connected to VCC-PLL and AVCC and
|
|
must be set to 3V.
|
|
|
|
config AXP221_ELDO3_VOLT
|
|
int "axp221 eldo3 voltage"
|
|
depends on AXP221_POWER
|
|
default 0
|
|
---help---
|
|
Set the voltage (mV) to program the axp221 eldo3 at, set to 0 to
|
|
disable eldo3. On some A31(s) tablets it might be used to supply
|
|
1.2V for the SSD2828 chip (converter of parallel LCD interface
|
|
into MIPI DSI).
|
|
|
|
endmenu
|