mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
5fb3e09d97
Remove the environment support for various legacy boot methods. With this, we will now default to booting any distribution that follows the generic distro boot framework and no longer attempt to boot various legacy (to this SoC) scripts/etc. Note that if we do not find anything here we will continue to try and Android methods and will start by trying fastboot. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210701132612.7559-3-trini@konsulko.com
333 lines
11 KiB
C
333 lines
11 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2013
|
|
* Texas Instruments Incorporated.
|
|
* Sricharan R <r.sricharan@ti.com>
|
|
*
|
|
* Derived from OMAP4 done by:
|
|
* Aneesh V <aneesh@ti.com>
|
|
*
|
|
* TI OMAP5 AND DRA7XX common configuration settings
|
|
*
|
|
* For more details, please see the technical documents listed at
|
|
* http://www.ti.com/product/omap5432
|
|
*/
|
|
|
|
#ifndef __CONFIG_TI_OMAP5_COMMON_H
|
|
#define __CONFIG_TI_OMAP5_COMMON_H
|
|
|
|
/* Use General purpose timer 1 */
|
|
#define CONFIG_SYS_TIMERBASE GPT2_BASE
|
|
|
|
/*
|
|
* For the DDR timing information we can either dynamically determine
|
|
* the timings to use or use pre-determined timings (based on using the
|
|
* dynamic method. Default to the static timing infomation.
|
|
*/
|
|
#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
|
|
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
|
|
#endif
|
|
|
|
#define CONFIG_PALMAS_POWER
|
|
|
|
#include <linux/stringify.h>
|
|
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/omap.h>
|
|
|
|
#include <configs/ti_armv7_omap.h>
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_SYS_NS16550_CLK 48000000
|
|
#if !defined(CONFIG_DM_SERIAL)
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#endif
|
|
|
|
/*
|
|
* Environment setup
|
|
*/
|
|
|
|
#ifndef DFUARGS
|
|
#define DFUARGS
|
|
#endif
|
|
|
|
#include <environment/ti/mmc.h>
|
|
#include <environment/ti/nand.h>
|
|
|
|
#ifndef CONSOLEDEV
|
|
#define CONSOLEDEV "ttyS2"
|
|
#endif
|
|
|
|
#ifndef PARTS_DEFAULT
|
|
/*
|
|
* Default GPT tables for eMMC (Linux and Android). Notes:
|
|
* 1. Keep partitions aligned to erase group size (512 KiB) when possible
|
|
* 2. Keep partitions in sync with DFU_ALT_INFO_EMMC (see dfu.h)
|
|
* 3. Keep 'bootloader' partition (U-Boot proper) start address in sync with
|
|
* CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (see common/spl/Kconfig)
|
|
*/
|
|
#define PARTS_DEFAULT \
|
|
/* Linux partitions */ \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \
|
|
"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
|
/* Android partitions */ \
|
|
"partitions_android=" \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
|
|
"name=bootloader,size=2048K,uuid=${uuid_gpt_bootloader};" \
|
|
"name=uboot-env,start=2432K,size=256K,uuid=${uuid_gpt_reserved};" \
|
|
"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
|
|
"name=boot_a,size=20M,uuid=${uuid_gpt_boot_a};" \
|
|
"name=boot_b,size=20M,uuid=${uuid_gpt_boot_b};" \
|
|
"name=dtbo_a,size=8M,uuid=${uuid_gpt_dtbo_a};" \
|
|
"name=dtbo_b,size=8M,uuid=${uuid_gpt_dtbo_b};" \
|
|
"name=vbmeta_a,size=64K,uuid=${uuid_gpt_vbmeta_a};" \
|
|
"name=vbmeta_b,size=64K,uuid=${uuid_gpt_vbmeta_b};" \
|
|
"name=recovery,size=64M,uuid=${uuid_gpt_recovery};" \
|
|
"name=super,size=2560M,uuid=${uuid_gpt_super};" \
|
|
"name=metadata,size=16M,uuid=${uuid_gpt_metadata};" \
|
|
"name=userdata,size=-,uuid=${uuid_gpt_userdata}"
|
|
#endif /* PARTS_DEFAULT */
|
|
|
|
#if defined(CONFIG_CMD_AVB)
|
|
#define AVB_VERIFY_CHECK "if run avb_verify; then " \
|
|
"echo AVB verification OK.;" \
|
|
"set bootargs $bootargs $avb_bootargs;" \
|
|
"else " \
|
|
"echo AVB verification failed.;" \
|
|
"exit; fi;"
|
|
#define AVB_VERIFY_CMD "avb_verify=avb init 1; avb verify $slot_suffix;\0"
|
|
#else
|
|
#define AVB_VERIFY_CHECK ""
|
|
#define AVB_VERIFY_CMD ""
|
|
#endif
|
|
|
|
#define CONTROL_PARTITION "misc"
|
|
|
|
#if defined(CONFIG_CMD_AB_SELECT)
|
|
#define AB_SELECT_SLOT \
|
|
"if part number mmc 1 " CONTROL_PARTITION " control_part_number; " \
|
|
"then " \
|
|
"echo " CONTROL_PARTITION \
|
|
" partition number:${control_part_number};" \
|
|
"ab_select slot_name mmc ${mmcdev}:${control_part_number};" \
|
|
"else " \
|
|
"echo " CONTROL_PARTITION " partition not found;" \
|
|
"exit;" \
|
|
"fi;" \
|
|
"setenv slot_suffix _${slot_name};"
|
|
#define AB_SELECT_ARGS \
|
|
"setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \
|
|
"echo A/B cmdline addition: ${bootargs_ab};" \
|
|
"setenv bootargs ${bootargs} ${bootargs_ab};"
|
|
#else
|
|
#define AB_SELECT_SLOT ""
|
|
#define AB_SELECT_ARGS ""
|
|
#endif
|
|
|
|
/*
|
|
* Prepares complete device tree blob for current board (for Android boot).
|
|
*
|
|
* Boot image or recovery image should be loaded into $loadaddr prior to running
|
|
* these commands. The logic of these commnads is next:
|
|
*
|
|
* 1. Read correct DTB for current SoC/board from boot image in $loadaddr
|
|
* to $fdtaddr
|
|
* 2. Merge all needed DTBO for current board from 'dtbo' partition into read
|
|
* DTB
|
|
* 3. User should provide $fdtaddr as 3rd argument to 'bootm'
|
|
*/
|
|
#define PREPARE_FDT \
|
|
"echo Preparing FDT...; " \
|
|
"if test $board_name = am57xx_evm_reva3; then " \
|
|
"echo \" Reading DTBO partition...\"; " \
|
|
"part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \
|
|
"part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \
|
|
"mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \
|
|
"echo \" Reading DTB for AM57x EVM RevA3...\"; " \
|
|
"abootimg get dtb --index=0 dtb_start dtb_size; " \
|
|
"cp.b $dtb_start $fdtaddr $dtb_size; " \
|
|
"fdt addr $fdtaddr 0x80000; " \
|
|
"echo \" Applying DTBOs for AM57x EVM RevA3...\"; " \
|
|
"adtimg addr $dtboaddr; " \
|
|
"adtimg get dt --index=0 dtbo0_addr dtbo0_size; " \
|
|
"fdt apply $dtbo0_addr; " \
|
|
"adtimg get dt --index=1 dtbo1_addr dtbo1_size; " \
|
|
"fdt apply $dtbo1_addr; " \
|
|
"elif test $board_name = beagle_x15_revc; then " \
|
|
"echo \" Reading DTB for Beagle X15 RevC...\"; " \
|
|
"abootimg get dtb --index=0 dtb_start dtb_size; " \
|
|
"cp.b $dtb_start $fdtaddr $dtb_size; " \
|
|
"fdt addr $fdtaddr 0x80000; " \
|
|
"else " \
|
|
"echo Error: Android boot is not supported for $board_name; " \
|
|
"exit; " \
|
|
"fi; " \
|
|
|
|
#define FASTBOOT_CMD \
|
|
"echo Booting into fastboot ...; " \
|
|
"fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; "
|
|
|
|
#define DEFAULT_COMMON_BOOT_TI_ARGS \
|
|
"console=" CONSOLEDEV ",115200n8\0" \
|
|
"fdtfile=undefined\0" \
|
|
"finduuid=part uuid mmc 0:2 uuid\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"vram=16M\0" \
|
|
AVB_VERIFY_CMD \
|
|
"partitions=" PARTS_DEFAULT "\0" \
|
|
"optargs=\0" \
|
|
"dofastboot=0\0" \
|
|
"emmc_android_boot=" \
|
|
"setenv mmcdev 1; " \
|
|
"mmc dev $mmcdev; " \
|
|
"mmc rescan; " \
|
|
AB_SELECT_SLOT \
|
|
"if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \
|
|
CONTROL_PARTITION "; then " \
|
|
"setenv ardaddr -; " \
|
|
"if bcb test command = bootonce-bootloader; then " \
|
|
"echo Android: Bootloader boot...; " \
|
|
"bcb clear command; bcb store; " \
|
|
FASTBOOT_CMD \
|
|
"exit; " \
|
|
"elif bcb test command = boot-recovery; then " \
|
|
"echo Android: Recovery boot...; " \
|
|
"setenv ardaddr $loadaddr;" \
|
|
"setenv apart recovery; " \
|
|
"else " \
|
|
"echo Android: Normal boot...; " \
|
|
"setenv ardaddr $loadaddr; " \
|
|
"setenv apart boot${slot_suffix}; " \
|
|
"fi; " \
|
|
"else " \
|
|
"echo Warning: BCB is corrupted or does not exist; " \
|
|
"echo Android: Normal boot...; " \
|
|
"fi; " \
|
|
"setenv eval_bootargs setenv bootargs $bootargs; " \
|
|
"run eval_bootargs; " \
|
|
"setenv machid fe6; " \
|
|
AVB_VERIFY_CHECK \
|
|
AB_SELECT_ARGS \
|
|
"if part start mmc $mmcdev $apart boot_start; then " \
|
|
"part size mmc $mmcdev $apart boot_size; " \
|
|
"mmc read $loadaddr $boot_start $boot_size; " \
|
|
PREPARE_FDT \
|
|
"bootm $loadaddr $ardaddr $fdtaddr; " \
|
|
"else " \
|
|
"echo $apart partition not found; " \
|
|
"exit; " \
|
|
"fi;\0"
|
|
|
|
#define DEFAULT_FDT_TI_ARGS \
|
|
"findfdt="\
|
|
"if test $board_name = omap5_uevm; then " \
|
|
"setenv fdtfile omap5-uevm.dtb; fi; " \
|
|
"if test $board_name = dra7xx; then " \
|
|
"setenv fdtfile dra7-evm.dtb; fi;" \
|
|
"if test $board_name = dra72x-revc; then " \
|
|
"setenv fdtfile dra72-evm-revc.dtb; fi;" \
|
|
"if test $board_name = dra72x; then " \
|
|
"setenv fdtfile dra72-evm.dtb; fi;" \
|
|
"if test $board_name = dra71x; then " \
|
|
"setenv fdtfile dra71-evm.dtb; fi;" \
|
|
"if test $board_name = dra76x_acd; then " \
|
|
"setenv fdtfile dra76-evm.dtb; fi;" \
|
|
"if test $board_name = beagle_x15; then " \
|
|
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
|
|
"if test $board_name = beagle_x15_revb1; then " \
|
|
"setenv fdtfile am57xx-beagle-x15-revb1.dtb; fi;" \
|
|
"if test $board_name = beagle_x15_revc; then " \
|
|
"setenv fdtfile am57xx-beagle-x15-revc.dtb; fi;" \
|
|
"if test $board_name = am5729_beagleboneai; then " \
|
|
"setenv fdtfile am5729-beagleboneai.dtb; fi;" \
|
|
"if test $board_name = am572x_idk; then " \
|
|
"setenv fdtfile am572x-idk.dtb; fi;" \
|
|
"if test $board_name = am574x_idk; then " \
|
|
"setenv fdtfile am574x-idk.dtb; fi;" \
|
|
"if test $board_name = am57xx_evm; then " \
|
|
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
|
|
"if test $board_name = am57xx_evm_reva3; then " \
|
|
"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
|
|
"if test $board_name = am571x_idk; then " \
|
|
"setenv fdtfile am571x-idk.dtb; fi;" \
|
|
"if test $fdtfile = undefined; then " \
|
|
"echo WARNING: Could not determine device tree to use; fi; \0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"if test ${dofastboot} -eq 1; then " \
|
|
"echo Boot fastboot requested, resetting dofastboot ...;" \
|
|
"setenv dofastboot 0; saveenv;" \
|
|
FASTBOOT_CMD \
|
|
"fi;" \
|
|
"if test ${boot_fit} -eq 1; then " \
|
|
"run update_to_fit;" \
|
|
"fi;" \
|
|
"run findfdt; " \
|
|
"run finduuid; " \
|
|
"run distro_bootcmd;" \
|
|
"run emmc_android_boot; " \
|
|
""
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(MMC, mmc, 1) \
|
|
func(PXE, pxe, na) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_LINUX_BOOT_ENV \
|
|
DEFAULT_MMC_TI_ARGS \
|
|
DEFAULT_FIT_TI_ARGS \
|
|
DEFAULT_COMMON_BOOT_TI_ARGS \
|
|
DEFAULT_FDT_TI_ARGS \
|
|
DFUARGS \
|
|
NETARGS \
|
|
NANDARGS \
|
|
BOOTENV
|
|
|
|
/*
|
|
* SPL related defines. The Public RAM memory map the ROM defines the
|
|
* area between 0x40300000 and 0x4031E000 as a download area for OMAP5.
|
|
* On DRA7xx/AM57XX the download area is between 0x40300000 and 0x4037E000.
|
|
* We set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and
|
|
* print some information.
|
|
*/
|
|
#ifdef CONFIG_TI_SECURE_DEVICE
|
|
/*
|
|
* For memory booting on HS parts, the first 4KB of the internal RAM is
|
|
* reserved for secure world use and the flash loader image is
|
|
* preceded by a secure certificate. The SPL will therefore run in internal
|
|
* RAM from address 0x40301350 (0x40300000+0x1000(reserved)+0x350(cert)).
|
|
*/
|
|
#define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ 0x1000
|
|
/* If no specific start address is specified then the secure EMIF
|
|
* region will be placed at the end of the DDR space. In order to prevent
|
|
* the main u-boot relocation from clobbering that memory and causing a
|
|
* firewall violation, we tell u-boot that memory is protected RAM (PRAM)
|
|
*/
|
|
#if (CONFIG_TI_SECURE_EMIF_REGION_START == 0)
|
|
#define CONFIG_PRAM (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE) >> 10
|
|
#endif
|
|
#else
|
|
/*
|
|
* For all booting on GP parts, the flash loader image is
|
|
* downloaded into internal RAM at address 0x40300000.
|
|
*/
|
|
#endif
|
|
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
|
|
(128 << 20))
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#undef CONFIG_TIMER
|
|
#endif
|
|
|
|
#endif /* __CONFIG_TI_OMAP5_COMMON_H */
|