mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
6ecbe13756
There is no dedicated reset signal wired up for the MX6QDL thus if the bootloader enables the link we need some special handling to get the core back into a state where it is safe to touch it for configuration. While there has been some special handling in the Linux kernel to do this, it was removed in 4.11 thus we need to do it properly in the bootloader and therefore without this if you enable PCI in the bootloader you will hang while booting the 4.11 kernel. This puts the PCIe controller back into a safe state for the kernel driver before launching the kernel. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Peter Senna Tschudin <peter.senna@collabora.com> |
||
|---|---|---|
| .. | ||
| cache.c | ||
| cmd_bmode.c | ||
| cmd_dek.c | ||
| cmd_hdmidet.c | ||
| cpu.c | ||
| ddrmc-vf610.c | ||
| hab.c | ||
| i2c-mxv7.c | ||
| imx_bootaux.c | ||
| init.c | ||
| iomux-v3.c | ||
| Kconfig | ||
| Makefile | ||
| misc.c | ||
| rdc-sema.c | ||
| sata.c | ||
| speed.c | ||
| spl.c | ||
| spl_sd.cfg | ||
| syscounter.c | ||
| timer.c | ||
| video.c | ||