u-boot/board/samsung/smdk5250/clock_init.c
Chander Kashyap 0aee53bacc EXYNOS: Add SMDK5250 board support
SMDK5250 board is based on Samsungs EXYNOS5250 SoC.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-02-12 10:11:30 +01:00

202 lines
5.1 KiB
C

/*
* Clock setup for SMDK5250 board based on EXYNOS5
*
* Copyright (C) 2012 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include "setup.h"
void system_clock_init()
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
/*
* MUX_APLL_SEL[0]: FINPLL = 0
* MUX_CPU_SEL[6]: MOUTAPLL = 0
* MUX_HPM_SEL[20]: MOUTAPLL = 0
*/
writel(0x0, &clk->src_cpu);
/* MUX_MPLL_SEL[8]: FINPLL = 0 */
writel(0x0, &clk->src_core1);
/*
* VPLLSRC_SEL[0]: FINPLL = 0
* MUX_{CPLL[8]}|{EPLL[12]}|{VPLL[16]}_SEL: FINPLL = 0
*/
writel(0x0, &clk->src_top2);
/* MUX_BPLL_SEL[0]: FINPLL = 0 */
writel(0x0, &clk->src_cdrex);
/* MUX_ACLK_* Clock Selection */
writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
/* MUX_ACLK_* Clock Selection */
writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
/* MUX_ACLK_* Clock Selection */
writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
/* MUX_PWI_SEL[19:16]: SCLKMPLL = 6 */
writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
/* MUX_ATCLK_LEX[0]: ACLK_200 = 0 */
writel(CLK_SRC_LEX_VAL, &clk->src_lex);
/* UART [0-5]: SCLKMPLL = 6 */
writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
/* Set Clock Ratios */
writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
/* Set COPY and HPM Ratio */
writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
/* CORED_RATIO, COREP_RATIO */
writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
/* PWI_RATIO[11:8], DVSEM_RATIO[22:16], DPM_RATIO[24:20] */
writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
/* ACLK_*_RATIO */
writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
/* ACLK_*_RATIO */
writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
/* CDREX Ratio */
writel(CLK_DIV_CDREX_INIT_VAL, &clk->div_cdrex);
/* MCLK_EFPHY_RATIO[3:0] */
writel(CLK_DIV_CDREX2_VAL, &clk->div_cdrex2);
/* {PCLK[4:6]|ATCLK[10:8]}_RATIO */
writel(CLK_DIV_LEX_VAL, &clk->div_lex);
/* PCLK_R0X_RATIO[3:0] */
writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
/* PCLK_R1X_RATIO[3:0] */
writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
/* SATA[24]: SCLKMPLL=0, MMC[0-4]: SCLKMPLL = 6 */
writel(CLK_SRC_FSYS_VAL, &clk->src_fsys);
/* UART[0-4] */
writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
/* PWM_RATIO[3:0] */
writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
/* SATA_RATIO, USB_DRD_RATIO */
writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
/* MMC[0-1] */
writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
/* MMC[2-3] */
writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
/* MMC[4] */
writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3);
/* ACLK|PLCK_ACP_RATIO */
writel(CLK_DIV_ACP_VAL, &clk->div_acp);
/* ISPDIV0_RATIO, ISPDIV1_RATIO */
writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
/* MCUISPDIV0_RATIO, MCUISPDIV1_RATIO */
writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
/* MPWMDIV_RATIO */
writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);
/* PLL locktime */
writel(APLL_LOCK_VAL, &clk->apll_lock);
writel(MPLL_LOCK_VAL, &clk->mpll_lock);
writel(BPLL_LOCK_VAL, &clk->bpll_lock);
writel(CPLL_LOCK_VAL, &clk->cpll_lock);
writel(EPLL_LOCK_VAL, &clk->epll_lock);
writel(VPLL_LOCK_VAL, &clk->vpll_lock);
sdelay(0x10000);
/* Set APLL */
writel(APLL_CON1_VAL, &clk->apll_con1);
writel(APLL_CON0_VAL, &clk->apll_con0);
sdelay(0x30000);
/* Set MPLL */
writel(MPLL_CON1_VAL, &clk->mpll_con1);
writel(MPLL_CON0_VAL, &clk->mpll_con0);
sdelay(0x30000);
writel(BPLL_CON1_VAL, &clk->bpll_con1);
writel(BPLL_CON0_VAL, &clk->bpll_con0);
sdelay(0x30000);
/* Set CPLL */
writel(CPLL_CON1_VAL, &clk->cpll_con1);
writel(CPLL_CON0_VAL, &clk->cpll_con0);
sdelay(0x30000);
/* Set EPLL */
writel(EPLL_CON2_VAL, &clk->epll_con2);
writel(EPLL_CON1_VAL, &clk->epll_con1);
writel(EPLL_CON0_VAL, &clk->epll_con0);
sdelay(0x30000);
/* Set VPLL */
writel(VPLL_CON2_VAL, &clk->vpll_con2);
writel(VPLL_CON1_VAL, &clk->vpll_con1);
writel(VPLL_CON0_VAL, &clk->vpll_con0);
sdelay(0x30000);
/* Set MPLL */
/* After Initiallising th PLL select the sources accordingly */
/* MUX_APLL_SEL[0]: MOUTAPLLFOUT = 1 */
writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
/* MUX_MPLL_SEL[8]: MOUTMPLLFOUT = 1 */
writel(CLK_SRC_CORE1_VAL, &clk->src_core1);
/* MUX_BPLL_SEL[0]: FOUTBPLL = 1*/
writel(CLK_SRC_CDREX_INIT_VAL, &clk->src_cdrex);
/*
* VPLLSRC_SEL[0]: FINPLL = 0
* MUX_{CPLL[8]}|{EPLL[12]}|{VPLL[16]}_SEL: MOUT{CPLL|EPLL|VPLL} = 1
* MUX_{MPLL[20]}|{BPLL[24]}_USER_SEL: FOUT{MPLL|BPLL} = 1
*/
writel(CLK_SRC_TOP2_VAL, &clk->src_top2);
}