mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
ad57b98e21
Move this out of the main file since for simple users it is easier to rely on standard boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
276 lines
11 KiB
ReStructuredText
276 lines
11 KiB
ReStructuredText
Booting Ubuntu Manually
|
|
-----------------------
|
|
|
|
This shows a manual approach to booting Ubuntu without standard boot or the EFI
|
|
interface.
|
|
|
|
As an example of how to set up your boot flow with U-Boot, here are
|
|
instructions for starting Ubuntu from U-Boot. These instructions have been
|
|
tested on Minnowboard MAX with a SATA drive but are equally applicable on
|
|
other platforms and other media. There are really only four steps and it's a
|
|
very simple script, but a more detailed explanation is provided here for
|
|
completeness.
|
|
|
|
Note: It is possible to set up U-Boot to boot automatically using syslinux.
|
|
It could also use the grub.cfg file (/efi/ubuntu/grub.cfg) to obtain the
|
|
GUID. If you figure these out, please post patches to this README.
|
|
|
|
Firstly, you will need Ubuntu installed on an available disk. It should be
|
|
possible to make U-Boot start a USB start-up disk but for now let's assume
|
|
that you used another boot loader to install Ubuntu.
|
|
|
|
Use the U-Boot command line to find the UUID of the partition you want to
|
|
boot. For example our disk is SCSI device 0::
|
|
|
|
=> part list scsi 0
|
|
|
|
Partition Map for SCSI device 0 -- Partition Type: EFI
|
|
|
|
Part Start LBA End LBA Name
|
|
Attributes
|
|
Type GUID
|
|
Partition GUID
|
|
1 0x00000800 0x001007ff ""
|
|
attrs: 0x0000000000000000
|
|
type: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
guid: 9d02e8e4-4d59-408f-a9b0-fd497bc9291c
|
|
2 0x00100800 0x037d8fff ""
|
|
attrs: 0x0000000000000000
|
|
type: 0fc63daf-8483-4772-8e79-3d69d8477de4
|
|
guid: 965c59ee-1822-4326-90d2-b02446050059
|
|
3 0x037d9000 0x03ba27ff ""
|
|
attrs: 0x0000000000000000
|
|
type: 0657fd6d-a4ab-43c4-84e5-0933c84b4f4f
|
|
guid: 2c4282bd-1e82-4bcf-a5ff-51dedbf39f17
|
|
=>
|
|
|
|
This shows that your SCSI disk has three partitions. The really long hex
|
|
strings are called Globally Unique Identifiers (GUIDs). You can look up the
|
|
'type' ones `here`_. On this disk the first partition is for EFI and is in
|
|
VFAT format (DOS/Windows)::
|
|
|
|
=> fatls scsi 0:1
|
|
efi/
|
|
|
|
0 file(s), 1 dir(s)
|
|
|
|
|
|
Partition 2 is 'Linux filesystem data' so that will be our root disk. It is
|
|
in ext2 format::
|
|
|
|
=> ext2ls scsi 0:2
|
|
<DIR> 4096 .
|
|
<DIR> 4096 ..
|
|
<DIR> 16384 lost+found
|
|
<DIR> 4096 boot
|
|
<DIR> 12288 etc
|
|
<DIR> 4096 media
|
|
<DIR> 4096 bin
|
|
<DIR> 4096 dev
|
|
<DIR> 4096 home
|
|
<DIR> 4096 lib
|
|
<DIR> 4096 lib64
|
|
<DIR> 4096 mnt
|
|
<DIR> 4096 opt
|
|
<DIR> 4096 proc
|
|
<DIR> 4096 root
|
|
<DIR> 4096 run
|
|
<DIR> 12288 sbin
|
|
<DIR> 4096 srv
|
|
<DIR> 4096 sys
|
|
<DIR> 4096 tmp
|
|
<DIR> 4096 usr
|
|
<DIR> 4096 var
|
|
<SYM> 33 initrd.img
|
|
<SYM> 30 vmlinuz
|
|
<DIR> 4096 cdrom
|
|
<SYM> 33 initrd.img.old
|
|
=>
|
|
|
|
and if you look in the /boot directory you will see the kernel::
|
|
|
|
=> ext2ls scsi 0:2 /boot
|
|
<DIR> 4096 .
|
|
<DIR> 4096 ..
|
|
<DIR> 4096 efi
|
|
<DIR> 4096 grub
|
|
3381262 System.map-3.13.0-32-generic
|
|
1162712 abi-3.13.0-32-generic
|
|
165611 config-3.13.0-32-generic
|
|
176500 memtest86+.bin
|
|
178176 memtest86+.elf
|
|
178680 memtest86+_multiboot.bin
|
|
5798112 vmlinuz-3.13.0-32-generic
|
|
165762 config-3.13.0-58-generic
|
|
1165129 abi-3.13.0-58-generic
|
|
5823136 vmlinuz-3.13.0-58-generic
|
|
19215259 initrd.img-3.13.0-58-generic
|
|
3391763 System.map-3.13.0-58-generic
|
|
5825048 vmlinuz-3.13.0-58-generic.efi.signed
|
|
28304443 initrd.img-3.13.0-32-generic
|
|
=>
|
|
|
|
The 'vmlinuz' files contain a packaged Linux kernel. The format is a kind of
|
|
self-extracting compressed file mixed with some 'setup' configuration data.
|
|
Despite its size (uncompressed it is >10MB) this only includes a basic set of
|
|
device drivers, enough to boot on most hardware types.
|
|
|
|
The 'initrd' files contain a RAM disk. This is something that can be loaded
|
|
into RAM and will appear to Linux like a disk. Ubuntu uses this to hold lots
|
|
of drivers for whatever hardware you might have. It is loaded before the
|
|
real root disk is accessed.
|
|
|
|
The numbers after the end of each file are the version. Here it is Linux
|
|
version 3.13. You can find the source code for this in the Linux tree with
|
|
the tag v3.13. The '.0' allows for additional Linux releases to fix problems,
|
|
but normally this is not needed. The '-58' is used by Ubuntu. Each time they
|
|
release a new kernel they increment this number. New Ubuntu versions might
|
|
include kernel patches to fix reported bugs. Stable kernels can exist for
|
|
some years so this number can get quite high.
|
|
|
|
The '.efi.signed' kernel is signed for EFI's secure boot. U-Boot has its own
|
|
secure boot mechanism - see `this`_ & `that`_. It cannot read .efi files
|
|
at present.
|
|
|
|
To boot Ubuntu from U-Boot the steps are as follows:
|
|
|
|
1. Set up the boot arguments. Use the GUID for the partition you want to boot::
|
|
|
|
=> setenv bootargs root=/dev/disk/by-partuuid/965c59ee-1822-4326-90d2-b02446050059 ro
|
|
|
|
Here root= tells Linux the location of its root disk. The disk is specified
|
|
by its GUID, using '/dev/disk/by-partuuid/', a Linux path to a 'directory'
|
|
containing all the GUIDs Linux has found. When it starts up, there will be a
|
|
file in that directory with this name in it. It is also possible to use a
|
|
device name here, see later.
|
|
|
|
2. Load the kernel. Since it is an ext2/4 filesystem we can do::
|
|
|
|
=> ext2load scsi 0:2 03000000 /boot/vmlinuz-3.13.0-58-generic
|
|
|
|
The address 30000000 is arbitrary, but there seem to be problems with using
|
|
small addresses (sometimes Linux cannot find the ramdisk). This is 48MB into
|
|
the start of RAM (which is at 0 on x86).
|
|
|
|
3. Load the ramdisk (to 64MB)::
|
|
|
|
=> ext2load scsi 0:2 04000000 /boot/initrd.img-3.13.0-58-generic
|
|
|
|
4. Start up the kernel. We need to know the size of the ramdisk, but can use
|
|
a variable for that. U-Boot sets 'filesize' to the size of the last file it
|
|
loaded::
|
|
|
|
=> zboot 03000000 0 04000000 ${filesize}
|
|
|
|
Type 'help zboot' if you want to see what the arguments are. U-Boot on x86 is
|
|
quite verbose when it boots a kernel. You should see these messages from
|
|
U-Boot::
|
|
|
|
Valid Boot Flag
|
|
Setup Size = 0x00004400
|
|
Magic signature found
|
|
Using boot protocol version 2.0c
|
|
Linux kernel version 3.13.0-58-generic (buildd@allspice) #97-Ubuntu SMP Wed Jul 8 02:56:15 UTC 2015
|
|
Building boot_params at 0x00090000
|
|
Loading bzImage at address 100000 (5805728 bytes)
|
|
Magic signature found
|
|
Initial RAM disk at linear address 0x04000000, size 19215259 bytes
|
|
Kernel command line: "root=/dev/disk/by-partuuid/965c59ee-1822-4326-90d2-b02446050059 ro"
|
|
|
|
Starting kernel ...
|
|
|
|
U-Boot prints out some bootstage timing. This is more useful if you put the
|
|
above commands into a script since then it will be faster::
|
|
|
|
Timer summary in microseconds:
|
|
Mark Elapsed Stage
|
|
0 0 reset
|
|
241,535 241,535 board_init_r
|
|
2,421,611 2,180,076 id=64
|
|
2,421,790 179 id=65
|
|
2,428,215 6,425 main_loop
|
|
48,860,584 46,432,369 start_kernel
|
|
|
|
Accumulated time:
|
|
240,329 ahci
|
|
1,422,704 vesa display
|
|
|
|
Now the kernel actually starts (if you want to examine kernel boot up message on
|
|
the serial console, append "console=ttyS0,115200" to the kernel command line)::
|
|
|
|
[ 0.000000] Initializing cgroup subsys cpuset
|
|
[ 0.000000] Initializing cgroup subsys cpu
|
|
[ 0.000000] Initializing cgroup subsys cpuacct
|
|
[ 0.000000] Linux version 3.13.0-58-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #97-Ubuntu SMP Wed Jul 8 02:56:15 UTC 2015 (Ubuntu 3.13.0-58.97-generic 3.13.11-ckt22)
|
|
[ 0.000000] Command line: root=/dev/disk/by-partuuid/965c59ee-1822-4326-90d2-b02446050059 ro console=ttyS0,115200
|
|
|
|
It continues for a long time. Along the way you will see it pick up your
|
|
ramdisk::
|
|
|
|
[ 0.000000] RAMDISK: [mem 0x04000000-0x05253fff]
|
|
...
|
|
[ 0.788540] Trying to unpack rootfs image as initramfs...
|
|
[ 1.540111] Freeing initrd memory: 18768K (ffff880004000000 - ffff880005254000)
|
|
...
|
|
|
|
Later it actually starts using it::
|
|
|
|
Begin: Running /scripts/local-premount ... done.
|
|
|
|
You should also see your boot disk turn up::
|
|
|
|
[ 4.357243] scsi 1:0:0:0: Direct-Access ATA ADATA SP310 5.2 PQ: 0 ANSI: 5
|
|
[ 4.366860] sd 1:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
|
|
[ 4.375677] sd 1:0:0:0: Attached scsi generic sg0 type 0
|
|
[ 4.381859] sd 1:0:0:0: [sda] Write Protect is off
|
|
[ 4.387452] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|
[ 4.399535] sda: sda1 sda2 sda3
|
|
|
|
Linux has found the three partitions (sda1-3). Mercifully it doesn't print out
|
|
the GUIDs. In step 1 above we could have used::
|
|
|
|
setenv bootargs root=/dev/sda2 ro
|
|
|
|
instead of the GUID. However if you add another drive to your board the
|
|
numbering may change whereas the GUIDs will not. So if your boot partition
|
|
becomes sdb2, it will still boot. For embedded systems where you just want to
|
|
boot the first disk, you have that option.
|
|
|
|
The last thing you will see on the console is mention of plymouth (which
|
|
displays the Ubuntu start-up screen) and a lot of 'Starting' messages::
|
|
|
|
* Starting Mount filesystems on boot [ OK ]
|
|
|
|
After a pause you should see a login screen on your display and you are done.
|
|
|
|
If you want to put this in a script you can use something like this::
|
|
|
|
setenv bootargs root=UUID=b2aaf743-0418-4d90-94cc-3e6108d7d968 ro
|
|
setenv boot zboot 03000000 0 04000000 \${filesize}
|
|
setenv bootcmd "ext2load scsi 0:2 03000000 /boot/vmlinuz-3.13.0-58-generic; ext2load scsi 0:2 04000000 /boot/initrd.img-3.13.0-58-generic; run boot"
|
|
saveenv
|
|
|
|
The \ is to tell the shell not to evaluate ${filesize} as part of the setenv
|
|
command.
|
|
|
|
You can also bake this behaviour into your build by hard-coding the
|
|
environment variables if you add this to minnowmax.h:
|
|
|
|
.. code-block:: c
|
|
|
|
#undef CONFIG_BOOTCOMMAND
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"ext2load scsi 0:2 03000000 /boot/vmlinuz-3.13.0-58-generic; " \
|
|
"ext2load scsi 0:2 04000000 /boot/initrd.img-3.13.0-58-generic; " \
|
|
"run boot"
|
|
|
|
#undef CFG_EXTRA_ENV_SETTINGS
|
|
#define CFG_EXTRA_ENV_SETTINGS "boot=zboot 03000000 0 04000000 ${filesize}"
|
|
|
|
and change CONFIG_BOOTARGS value in configs/minnowmax_defconfig to::
|
|
|
|
CONFIG_BOOTARGS="root=/dev/sda2 ro"
|
|
|
|
.. _here: https://en.wikipedia.org/wiki/GUID_Partition_Table
|
|
.. _this: http://events.linuxfoundation.org/sites/events/files/slides/chromeos_and_diy_vboot_0.pdf
|
|
.. _that: http://events.linuxfoundation.org/sites/events/files/slides/elce-2014.pdf
|