u-boot/arch/arm/include/asm/arch-fsl-layerscape/config.h
Aneesh Bansal 9711f52806 armv8/ls1043ardb: add SECURE BOOT target for NOR
LS1043ARDB Secure Boot Target from NOR has been added.
- Configs defined to enable esbc_validate.
- ESBC Address in header is made 64 bit.
- SMMU is re-configured in Bypass mode.

Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-12-15 08:57:35 +08:00

173 lines
5.4 KiB
C

/*
* Copyright 2015, Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_
#define _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_
#include <fsl_ddrc_version.h>
#ifdef CONFIG_SYS_FSL_DDR4
#define CONFIG_SYS_FSL_DDRC_GEN4
#else
#define CONFIG_SYS_FSL_DDRC_ARM_GEN3 /* Enable Freescale ARM DDR3 driver */
#endif
#define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
/*
* Reserve secure memory
* To be aligned with MMU block size
*/
#define CONFIG_SYS_MEM_RESERVE_SECURE (2048 * 1024) /* 2MB */
#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
#define CONFIG_MAX_CPUS 16
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#ifdef CONFIG_LS2080A
#define CONFIG_NUM_DDR_CONTROLLERS 2
#endif
#ifdef CONFIG_LS2085A
#define CONFIG_NUM_DDR_CONTROLLERS 3
#define CONFIG_SYS_FSL_HAS_DP_DDR
#endif
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 }
#define SRDS_MAX_LANES 8
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_FSL_SRDS_2
#define CONFIG_SYS_PAGE_SIZE 0x10000
#define CONFIG_SYS_CACHELINE_SIZE 64
#ifndef L1_CACHE_BYTES
#define L1_CACHE_SHIFT 6
#define L1_CACHE_BYTES BIT(L1_CACHE_SHIFT)
#endif
#define CONFIG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */
#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00200000 /* 2M */
/* DDR */
#define CONFIG_SYS_FSL_DDR_LE
#define CONFIG_SYS_LS2_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS2_DDR_BLOCK1_SIZE
#define CONFIG_SYS_FSL_CCSR_GUR_LE
#define CONFIG_SYS_FSL_CCSR_SCFG_LE
#define CONFIG_SYS_FSL_ESDHC_LE
#define CONFIG_SYS_FSL_IFC_LE
#define CONFIG_SYS_FSL_PEX_LUT_LE
#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
/* Generic Interrupt Controller Definitions */
#define GICD_BASE 0x06000000
#define GICR_BASE 0x06100000
/* SMMU Defintions */
#define SMMU_BASE 0x05000000 /* GR0 Base */
/* Cache Coherent Interconnect */
#define CCI_MN_BASE 0x04000000
#define CCI_MN_RNF_NODEID_LIST 0x180
#define CCI_MN_DVM_DOMAIN_CTL 0x200
#define CCI_MN_DVM_DOMAIN_CTL_SET 0x210
#define CCI_HN_F_0_BASE (CCI_MN_BASE + 0x200000)
#define CCI_HN_F_1_BASE (CCI_MN_BASE + 0x210000)
#define CCN_HN_F_SAM_CTL 0x8 /* offset on base HN_F base */
#define CCN_HN_F_SAM_NODEID_MASK 0x7f
#define CCN_HN_F_SAM_NODEID_DDR0 0x4
#define CCN_HN_F_SAM_NODEID_DDR1 0xe
#define CCI_RN_I_0_BASE (CCI_MN_BASE + 0x800000)
#define CCI_RN_I_2_BASE (CCI_MN_BASE + 0x820000)
#define CCI_RN_I_6_BASE (CCI_MN_BASE + 0x860000)
#define CCI_RN_I_12_BASE (CCI_MN_BASE + 0x8C0000)
#define CCI_RN_I_16_BASE (CCI_MN_BASE + 0x900000)
#define CCI_RN_I_20_BASE (CCI_MN_BASE + 0x940000)
#define CCI_S0_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x10)
#define CCI_S1_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x110)
#define CCI_S2_QOS_CONTROL_BASE(x) ((CCI_RN_I_0_BASE + (x * 0x10000)) + 0x210)
/* TZ Protection Controller Definitions */
#define TZPC_BASE 0x02200000
#define TZPCR0SIZE_BASE (TZPC_BASE)
#define TZPCDECPROT_0_STAT_BASE (TZPC_BASE + 0x800)
#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804)
#define TZPCDECPROT_0_CLR_BASE (TZPC_BASE + 0x808)
#define TZPCDECPROT_1_STAT_BASE (TZPC_BASE + 0x80C)
#define TZPCDECPROT_1_SET_BASE (TZPC_BASE + 0x810)
#define TZPCDECPROT_1_CLR_BASE (TZPC_BASE + 0x814)
#define TZPCDECPROT_2_STAT_BASE (TZPC_BASE + 0x818)
#define TZPCDECPROT_2_SET_BASE (TZPC_BASE + 0x81C)
#define TZPCDECPROT_2_CLR_BASE (TZPC_BASE + 0x820)
#define DCSR_CGACRE5 0x700070914ULL
#define EPU_EPCMPR5 0x700060914ULL
#define EPU_EPCCR5 0x700060814ULL
#define EPU_EPSMCR5 0x700060228ULL
#define EPU_EPECR5 0x700060314ULL
#define EPU_EPCTR5 0x700060a14ULL
#define EPU_EPGCR 0x700060000ULL
#define CONFIG_SYS_FSL_ERRATUM_A008336
#define CONFIG_SYS_FSL_ERRATUM_A008511
#define CONFIG_SYS_FSL_ERRATUM_A008514
#define CONFIG_SYS_FSL_ERRATUM_A008585
#define CONFIG_SYS_FSL_ERRATUM_A008751
#define CONFIG_SYS_FSL_ERRATUM_A009635
#elif defined(CONFIG_LS1043A)
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 7
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0x01000000
#define CONFIG_SYS_FSL_SEC_COMPAT 5
#define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */
#define CONFIG_SYS_FSL_OCRAM_SIZE 0x200000 /* 2 MiB */
#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
#define CONFIG_SYS_FSL_CCSR_GUR_BE
#define CONFIG_SYS_FSL_CCSR_SCFG_BE
#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_ESDHC_BE
#define CONFIG_SYS_FSL_WDOG_BE
#define CONFIG_SYS_FSL_DSPI_BE
#define CONFIG_SYS_FSL_QSPI_BE
#define CONFIG_SYS_FSL_PEX_LUT_BE
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#define SRDS_MAX_LANES 4
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_SFP_VER_3_2
#define CONFIG_SYS_FSL_SEC_MON_BE
#define CONFIG_SYS_FSL_SEC_BE
#define CONFIG_SYS_FSL_SFP_BE
#define CONFIG_SYS_FSL_SRK_LE
#define CONFIG_KEY_REVOCATION
/* SMMU Defintions */
#define SMMU_BASE 0x09000000
/* Generic Interrupt Controller Definitions */
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
#else
#error SoC not defined
#endif
#endif /* _ASM_ARMV8_FSL_LAYERSCAPE_CONFIG_H_ */