u-boot/configs/omapl138_lcdk_defconfig
Bartosz Golaszewski e809285d49 net: davinci_emac: convert to using the driver model
Now that we removed all legacy boards selecting TI_EMAC we can
completely convert the driver code to using the driver model.
This patch also updates all remaining users of davinci_emac.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm & da850-evm
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2019-07-25 13:36:13 -05:00

58 lines
1.4 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_DAVINCI=y
CONFIG_SYS_TEXT_BASE=0xc1080000
CONFIG_TARGET_OMAPL138_LCDK=y
CONFIG_SYS_DA850_PLL0_POSTDIV=0
CONFIG_SYS_DA850_PLL1_PLLDIV3=0x8003
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=3
CONFIG_MISC_INIT_R=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CRC32_VERIFY=y
# CONFIG_CMD_EEPROM is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_DIAG=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_DM_I2C=y
CONFIG_DM_I2C_COMPAT=y
CONFIG_SYS_I2C_DAVINCI=y
CONFIG_DM_MMC=y
CONFIG_NAND=y
CONFIG_NAND_DAVINCI=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DAVINCI_SPI=y