mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
d5de3d4978
The 'status' variable in 'socfpga_load()' for both gen5 and arria10 is of type 'unsigned long' while it is always used as 'int' only. Change it to 'int'. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
473 lines
12 KiB
C
473 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2017 Intel Corporation <www.intel.com>
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/arch/fpga_manager.h>
|
|
#include <asm/arch/reset_manager.h>
|
|
#include <asm/arch/system_manager.h>
|
|
#include <asm/arch/sdram.h>
|
|
#include <asm/arch/misc.h>
|
|
#include <altera.h>
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <wait_bit.h>
|
|
#include <watchdog.h>
|
|
|
|
#define CFGWDTH_32 1
|
|
#define MIN_BITSTREAM_SIZECHECK 230
|
|
#define ENCRYPTION_OFFSET 69
|
|
#define COMPRESSION_OFFSET 229
|
|
#define FPGA_TIMEOUT_MSEC 1000 /* timeout in ms */
|
|
#define FPGA_TIMEOUT_CNT 0x1000000
|
|
|
|
static const struct socfpga_fpga_manager *fpga_manager_base =
|
|
(void *)SOCFPGA_FPGAMGRREGS_ADDRESS;
|
|
|
|
static const struct socfpga_system_manager *system_manager_base =
|
|
(void *)SOCFPGA_SYSMGR_ADDRESS;
|
|
|
|
static void fpgamgr_set_cd_ratio(unsigned long ratio);
|
|
|
|
static uint32_t fpgamgr_get_msel(void)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(&fpga_manager_base->imgcfg_stat);
|
|
reg = (reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SET_MSD) >>
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_LSB;
|
|
|
|
return reg;
|
|
}
|
|
|
|
static void fpgamgr_set_cfgwdth(int width)
|
|
{
|
|
if (width)
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK);
|
|
else
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK);
|
|
}
|
|
|
|
int is_fpgamgr_user_mode(void)
|
|
{
|
|
return (readl(&fpga_manager_base->imgcfg_stat) &
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) != 0;
|
|
}
|
|
|
|
static int wait_for_user_mode(void)
|
|
{
|
|
return wait_for_bit_le32(&fpga_manager_base->imgcfg_stat,
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK,
|
|
1, FPGA_TIMEOUT_MSEC, false);
|
|
}
|
|
|
|
static int is_fpgamgr_early_user_mode(void)
|
|
{
|
|
return (readl(&fpga_manager_base->imgcfg_stat) &
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK) != 0;
|
|
}
|
|
|
|
int fpgamgr_wait_early_user_mode(void)
|
|
{
|
|
u32 sync_data = 0xffffffff;
|
|
u32 i = 0;
|
|
unsigned start = get_timer(0);
|
|
unsigned long cd_ratio;
|
|
|
|
/* Getting existing CDRATIO */
|
|
cd_ratio = (readl(&fpga_manager_base->imgcfg_ctrl_02) &
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK) >>
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB;
|
|
|
|
/* Using CDRATIO_X1 for better compatibility */
|
|
fpgamgr_set_cd_ratio(CDRATIO_x1);
|
|
|
|
while (!is_fpgamgr_early_user_mode()) {
|
|
if (get_timer(start) > FPGA_TIMEOUT_MSEC)
|
|
return -ETIMEDOUT;
|
|
fpgamgr_program_write((const long unsigned int *)&sync_data,
|
|
sizeof(sync_data));
|
|
udelay(FPGA_TIMEOUT_MSEC);
|
|
i++;
|
|
}
|
|
|
|
debug("Additional %i sync word needed\n", i);
|
|
|
|
/* restoring original CDRATIO */
|
|
fpgamgr_set_cd_ratio(cd_ratio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Read f2s_nconfig_pin and f2s_nstatus_pin; loop until de-asserted */
|
|
static int wait_for_nconfig_pin_and_nstatus_pin(void)
|
|
{
|
|
unsigned long mask = ALT_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN_SET_MSK |
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK;
|
|
|
|
/*
|
|
* Poll until f2s_nconfig_pin and f2s_nstatus_pin; loop until
|
|
* de-asserted, timeout at 1000ms
|
|
*/
|
|
return wait_for_bit_le32(&fpga_manager_base->imgcfg_stat, mask,
|
|
true, FPGA_TIMEOUT_MSEC, false);
|
|
}
|
|
|
|
static int wait_for_f2s_nstatus_pin(unsigned long value)
|
|
{
|
|
/* Poll until f2s to specific value, timeout at 1000ms */
|
|
return wait_for_bit_le32(&fpga_manager_base->imgcfg_stat,
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK,
|
|
value, FPGA_TIMEOUT_MSEC, false);
|
|
}
|
|
|
|
/* set CD ratio */
|
|
static void fpgamgr_set_cd_ratio(unsigned long ratio)
|
|
{
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK);
|
|
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
|
|
(ratio << ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB) &
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK);
|
|
}
|
|
|
|
/* get the MSEL value, verify we are set for FPP configuration mode */
|
|
static int fpgamgr_verify_msel(void)
|
|
{
|
|
u32 msel = fpgamgr_get_msel();
|
|
|
|
if (msel & ~BIT(0)) {
|
|
printf("Fail: read msel=%d\n", msel);
|
|
return -EPERM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Write cdratio and cdwidth based on whether the bitstream is compressed
|
|
* and/or encoded
|
|
*/
|
|
static int fpgamgr_set_cdratio_cdwidth(unsigned int cfg_width, u32 *rbf_data,
|
|
size_t rbf_size)
|
|
{
|
|
unsigned int cd_ratio;
|
|
bool encrypt, compress;
|
|
|
|
/*
|
|
* According to the bitstream specification,
|
|
* both encryption and compression status are
|
|
* in location before offset 230 of the buffer.
|
|
*/
|
|
if (rbf_size < MIN_BITSTREAM_SIZECHECK)
|
|
return -EINVAL;
|
|
|
|
encrypt = (rbf_data[ENCRYPTION_OFFSET] >> 2) & 3;
|
|
encrypt = encrypt != 0;
|
|
|
|
compress = (rbf_data[COMPRESSION_OFFSET] >> 1) & 1;
|
|
compress = !compress;
|
|
|
|
debug("header word %d = %08x\n", 69, rbf_data[69]);
|
|
debug("header word %d = %08x\n", 229, rbf_data[229]);
|
|
debug("read from rbf header: encrypt=%d compress=%d\n", encrypt, compress);
|
|
|
|
/*
|
|
* from the register map description of cdratio in imgcfg_ctrl_02:
|
|
* Normal Configuration : 32bit Passive Parallel
|
|
* Partial Reconfiguration : 16bit Passive Parallel
|
|
*/
|
|
|
|
/*
|
|
* cd ratio is dependent on cfg width and whether the bitstream
|
|
* is encrypted and/or compressed.
|
|
*
|
|
* | width | encr. | compr. | cd ratio |
|
|
* | 16 | 0 | 0 | 1 |
|
|
* | 16 | 0 | 1 | 4 |
|
|
* | 16 | 1 | 0 | 2 |
|
|
* | 16 | 1 | 1 | 4 |
|
|
* | 32 | 0 | 0 | 1 |
|
|
* | 32 | 0 | 1 | 8 |
|
|
* | 32 | 1 | 0 | 4 |
|
|
* | 32 | 1 | 1 | 8 |
|
|
*/
|
|
if (!compress && !encrypt) {
|
|
cd_ratio = CDRATIO_x1;
|
|
} else {
|
|
if (compress)
|
|
cd_ratio = CDRATIO_x4;
|
|
else
|
|
cd_ratio = CDRATIO_x2;
|
|
|
|
/* if 32 bit, double the cd ratio (so register
|
|
field setting is incremented) */
|
|
if (cfg_width == CFGWDTH_32)
|
|
cd_ratio += 1;
|
|
}
|
|
|
|
fpgamgr_set_cfgwdth(cfg_width);
|
|
fpgamgr_set_cd_ratio(cd_ratio);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fpgamgr_reset(void)
|
|
{
|
|
unsigned long reg;
|
|
|
|
/* S2F_NCONFIG = 0 */
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
|
|
|
|
/* Wait for f2s_nstatus == 0 */
|
|
if (wait_for_f2s_nstatus_pin(0))
|
|
return -ETIME;
|
|
|
|
/* S2F_NCONFIG = 1 */
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
|
|
|
|
/* Wait for f2s_nstatus == 1 */
|
|
if (wait_for_f2s_nstatus_pin(1))
|
|
return -ETIME;
|
|
|
|
/* read and confirm f2s_condone_pin = 0 and f2s_condone_oe = 1 */
|
|
reg = readl(&fpga_manager_base->imgcfg_stat);
|
|
if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) != 0)
|
|
return -EPERM;
|
|
|
|
if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_OE_SET_MSK) == 0)
|
|
return -EPERM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Start the FPGA programming by initialize the FPGA Manager */
|
|
int fpgamgr_program_init(u32 * rbf_data, size_t rbf_size)
|
|
{
|
|
int ret;
|
|
|
|
/* Step 1 */
|
|
if (fpgamgr_verify_msel())
|
|
return -EPERM;
|
|
|
|
/* Step 2 */
|
|
if (fpgamgr_set_cdratio_cdwidth(CFGWDTH_32, rbf_data, rbf_size))
|
|
return -EPERM;
|
|
|
|
/*
|
|
* Step 3:
|
|
* Make sure no other external devices are trying to interfere with
|
|
* programming:
|
|
*/
|
|
if (wait_for_nconfig_pin_and_nstatus_pin())
|
|
return -ETIME;
|
|
|
|
/*
|
|
* Step 4:
|
|
* Deassert the signal drives from HPS
|
|
*
|
|
* S2F_NCE = 1
|
|
* S2F_PR_REQUEST = 0
|
|
* EN_CFG_CTRL = 0
|
|
* EN_CFG_DATA = 0
|
|
* S2F_NCONFIG = 1
|
|
* S2F_NSTATUS_OE = 0
|
|
* S2F_CONDONE_OE = 0
|
|
*/
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
|
|
ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
|
|
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
|
|
ALT_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST_SET_MSK);
|
|
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
|
|
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
|
|
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE_SET_MSK |
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE_SET_MSK);
|
|
|
|
/*
|
|
* Step 5:
|
|
* Enable overrides
|
|
* S2F_NENABLE_CONFIG = 0
|
|
* S2F_NENABLE_NCONFIG = 0
|
|
*/
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
|
|
ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG_SET_MSK);
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG_SET_MSK);
|
|
|
|
/*
|
|
* Disable driving signals that HPS doesn't need to drive.
|
|
* S2F_NENABLE_NSTATUS = 1
|
|
* S2F_NENABLE_CONDONE = 1
|
|
*/
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS_SET_MSK |
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE_SET_MSK);
|
|
|
|
/*
|
|
* Step 6:
|
|
* Drive chip select S2F_NCE = 0
|
|
*/
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
|
|
ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
|
|
|
|
/* Step 7 */
|
|
if (wait_for_nconfig_pin_and_nstatus_pin())
|
|
return -ETIME;
|
|
|
|
/* Step 8 */
|
|
ret = fpgamgr_reset();
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Step 9:
|
|
* EN_CFG_CTRL and EN_CFG_DATA = 1
|
|
*/
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ensure the FPGA entering config done */
|
|
static int fpgamgr_program_poll_cd(void)
|
|
{
|
|
unsigned long reg, i;
|
|
|
|
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
|
|
reg = readl(&fpga_manager_base->imgcfg_stat);
|
|
if (reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK)
|
|
return 0;
|
|
|
|
if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK) == 0) {
|
|
printf("nstatus == 0 while waiting for condone\n");
|
|
return -EPERM;
|
|
}
|
|
}
|
|
|
|
if (i == FPGA_TIMEOUT_CNT)
|
|
return -ETIME;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ensure the FPGA entering user mode */
|
|
static int fpgamgr_program_poll_usermode(void)
|
|
{
|
|
unsigned long reg;
|
|
int ret = 0;
|
|
|
|
if (fpgamgr_dclkcnt_set(0xf))
|
|
return -ETIME;
|
|
|
|
ret = wait_for_user_mode();
|
|
if (ret < 0) {
|
|
printf("%s: Failed to enter user mode with ", __func__);
|
|
printf("error code %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Step 14:
|
|
* Stop DATA path and Dclk
|
|
* EN_CFG_CTRL and EN_CFG_DATA = 0
|
|
*/
|
|
clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
|
|
ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
|
|
|
|
/*
|
|
* Step 15:
|
|
* Disable overrides
|
|
* S2F_NENABLE_CONFIG = 1
|
|
* S2F_NENABLE_NCONFIG = 1
|
|
*/
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
|
|
ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG_SET_MSK);
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
|
|
ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG_SET_MSK);
|
|
|
|
/* Disable chip select S2F_NCE = 1 */
|
|
setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
|
|
ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
|
|
|
|
/*
|
|
* Step 16:
|
|
* Final check
|
|
*/
|
|
reg = readl(&fpga_manager_base->imgcfg_stat);
|
|
if (((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) !=
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) ||
|
|
((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) !=
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) ||
|
|
((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK) !=
|
|
ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK))
|
|
return -EPERM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int fpgamgr_program_finish(void)
|
|
{
|
|
/* Ensure the FPGA entering config done */
|
|
int status = fpgamgr_program_poll_cd();
|
|
|
|
if (status) {
|
|
printf("FPGA: Poll CD failed with error code %d\n", status);
|
|
return -EPERM;
|
|
}
|
|
WATCHDOG_RESET();
|
|
|
|
/* Ensure the FPGA entering user mode */
|
|
status = fpgamgr_program_poll_usermode();
|
|
if (status) {
|
|
printf("FPGA: Poll usermode failed with error code %d\n",
|
|
status);
|
|
return -EPERM;
|
|
}
|
|
|
|
printf("Full Configuration Succeeded.\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
|
|
* Return 0 for sucess, non-zero for error.
|
|
*/
|
|
int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
|
|
{
|
|
int status;
|
|
|
|
/* disable all signals from hps peripheral controller to fpga */
|
|
writel(0, &system_manager_base->fpgaintf_en_global);
|
|
|
|
/* disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
|
|
socfpga_bridges_reset();
|
|
|
|
/* Initialize the FPGA Manager */
|
|
status = fpgamgr_program_init((u32 *)rbf_data, rbf_size);
|
|
if (status)
|
|
return status;
|
|
|
|
/* Write the RBF data to FPGA Manager */
|
|
fpgamgr_program_write(rbf_data, rbf_size);
|
|
|
|
return fpgamgr_program_finish();
|
|
}
|