mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
9b5b8b6ee1
When enable dcache on HiKey, we're running into MMC command timeouts because our retry loop is now faster than the eMMC (or an external SD card) can answer. Increase the retry count to the same as the timeout value for status reports. The real fix is obviously to not base this whole thing on a cycle counter but on real wall time, but that would be slightly more intrusive. Signed-off-by: Alexander Graf <agraf@suse.de>
484 lines
11 KiB
C
484 lines
11 KiB
C
/*
|
|
* (C) Copyright 2012 SAMSUNG Electronics
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
* Rajeshawari Shinde <rajeshwari.s@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <bouncebuf.h>
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <mmc.h>
|
|
#include <dwmmc.h>
|
|
#include <asm-generic/errno.h>
|
|
|
|
#define PAGE_SIZE 4096
|
|
|
|
static int dwmci_wait_reset(struct dwmci_host *host, u32 value)
|
|
{
|
|
unsigned long timeout = 1000;
|
|
u32 ctrl;
|
|
|
|
dwmci_writel(host, DWMCI_CTRL, value);
|
|
|
|
while (timeout--) {
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
if (!(ctrl & DWMCI_RESET_ALL))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void dwmci_set_idma_desc(struct dwmci_idmac *idmac,
|
|
u32 desc0, u32 desc1, u32 desc2)
|
|
{
|
|
struct dwmci_idmac *desc = idmac;
|
|
|
|
desc->flags = desc0;
|
|
desc->cnt = desc1;
|
|
desc->addr = desc2;
|
|
desc->next_addr = (ulong)desc + sizeof(struct dwmci_idmac);
|
|
}
|
|
|
|
static void dwmci_prepare_data(struct dwmci_host *host,
|
|
struct mmc_data *data,
|
|
struct dwmci_idmac *cur_idmac,
|
|
void *bounce_buffer)
|
|
{
|
|
unsigned long ctrl;
|
|
unsigned int i = 0, flags, cnt, blk_cnt;
|
|
ulong data_start, data_end;
|
|
|
|
|
|
blk_cnt = data->blocks;
|
|
|
|
dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
|
|
|
|
data_start = (ulong)cur_idmac;
|
|
dwmci_writel(host, DWMCI_DBADDR, (ulong)cur_idmac);
|
|
|
|
do {
|
|
flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
|
|
flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
|
|
if (blk_cnt <= 8) {
|
|
flags |= DWMCI_IDMAC_LD;
|
|
cnt = data->blocksize * blk_cnt;
|
|
} else
|
|
cnt = data->blocksize * 8;
|
|
|
|
dwmci_set_idma_desc(cur_idmac, flags, cnt,
|
|
(ulong)bounce_buffer + (i * PAGE_SIZE));
|
|
|
|
if (blk_cnt <= 8)
|
|
break;
|
|
blk_cnt -= 8;
|
|
cur_idmac++;
|
|
i++;
|
|
} while(1);
|
|
|
|
data_end = (ulong)cur_idmac;
|
|
flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN);
|
|
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN;
|
|
dwmci_writel(host, DWMCI_CTRL, ctrl);
|
|
|
|
ctrl = dwmci_readl(host, DWMCI_BMOD);
|
|
ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN;
|
|
dwmci_writel(host, DWMCI_BMOD, ctrl);
|
|
|
|
dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
|
|
dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks);
|
|
}
|
|
|
|
static int dwmci_data_transfer(struct dwmci_host *host, struct mmc_data *data)
|
|
{
|
|
int ret = 0;
|
|
u32 timeout = 240000;
|
|
u32 mask, size, i, len = 0;
|
|
u32 *buf = NULL;
|
|
ulong start = get_timer(0);
|
|
u32 fifo_depth = (((host->fifoth_val & RX_WMARK_MASK) >>
|
|
RX_WMARK_SHIFT) + 1) * 2;
|
|
|
|
size = data->blocksize * data->blocks / 4;
|
|
if (data->flags == MMC_DATA_READ)
|
|
buf = (unsigned int *)data->dest;
|
|
else
|
|
buf = (unsigned int *)data->src;
|
|
|
|
for (;;) {
|
|
mask = dwmci_readl(host, DWMCI_RINTSTS);
|
|
/* Error during data transfer. */
|
|
if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
|
|
debug("%s: DATA ERROR!\n", __func__);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (host->fifo_mode && size) {
|
|
if (data->flags == MMC_DATA_READ) {
|
|
if ((dwmci_readl(host, DWMCI_RINTSTS) &&
|
|
DWMCI_INTMSK_RXDR)) {
|
|
len = dwmci_readl(host, DWMCI_STATUS);
|
|
len = (len >> DWMCI_FIFO_SHIFT) &
|
|
DWMCI_FIFO_MASK;
|
|
for (i = 0; i < len; i++)
|
|
*buf++ =
|
|
dwmci_readl(host, DWMCI_DATA);
|
|
dwmci_writel(host, DWMCI_RINTSTS,
|
|
DWMCI_INTMSK_RXDR);
|
|
}
|
|
} else {
|
|
if ((dwmci_readl(host, DWMCI_RINTSTS) &&
|
|
DWMCI_INTMSK_TXDR)) {
|
|
len = dwmci_readl(host, DWMCI_STATUS);
|
|
len = fifo_depth - ((len >>
|
|
DWMCI_FIFO_SHIFT) &
|
|
DWMCI_FIFO_MASK);
|
|
for (i = 0; i < len; i++)
|
|
dwmci_writel(host, DWMCI_DATA,
|
|
*buf++);
|
|
dwmci_writel(host, DWMCI_RINTSTS,
|
|
DWMCI_INTMSK_TXDR);
|
|
}
|
|
}
|
|
size = size > len ? (size - len) : 0;
|
|
}
|
|
|
|
/* Data arrived correctly. */
|
|
if (mask & DWMCI_INTMSK_DTO) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
/* Check for timeout. */
|
|
if (get_timer(start) > timeout) {
|
|
debug("%s: Timeout waiting for data!\n",
|
|
__func__);
|
|
ret = TIMEOUT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, mask);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwmci_set_transfer_mode(struct dwmci_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
unsigned long mode;
|
|
|
|
mode = DWMCI_CMD_DATA_EXP;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
mode |= DWMCI_CMD_RW;
|
|
|
|
return mode;
|
|
}
|
|
|
|
static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct dwmci_host *host = mmc->priv;
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac,
|
|
data ? DIV_ROUND_UP(data->blocks, 8) : 0);
|
|
int ret = 0, flags = 0, i;
|
|
unsigned int timeout = 100000;
|
|
u32 retry = 100000;
|
|
u32 mask, ctrl;
|
|
ulong start = get_timer(0);
|
|
struct bounce_buffer bbstate;
|
|
|
|
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
|
|
if (get_timer(start) > timeout) {
|
|
debug("%s: Timeout on data busy\n", __func__);
|
|
return TIMEOUT;
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
|
|
|
|
if (data) {
|
|
if (host->fifo_mode) {
|
|
dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
|
|
dwmci_writel(host, DWMCI_BYTCNT,
|
|
data->blocksize * data->blocks);
|
|
dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
|
|
} else {
|
|
if (data->flags == MMC_DATA_READ) {
|
|
bounce_buffer_start(&bbstate, (void*)data->dest,
|
|
data->blocksize *
|
|
data->blocks, GEN_BB_WRITE);
|
|
} else {
|
|
bounce_buffer_start(&bbstate, (void*)data->src,
|
|
data->blocksize *
|
|
data->blocks, GEN_BB_READ);
|
|
}
|
|
dwmci_prepare_data(host, data, cur_idmac,
|
|
bbstate.bounce_buffer);
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
|
|
|
|
if (data)
|
|
flags = dwmci_set_transfer_mode(host, data);
|
|
|
|
if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
|
|
return -1;
|
|
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
flags |= DWMCI_CMD_ABORT_STOP;
|
|
else
|
|
flags |= DWMCI_CMD_PRV_DAT_WAIT;
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
flags |= DWMCI_CMD_RESP_EXP;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
flags |= DWMCI_CMD_RESP_LENGTH;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
flags |= DWMCI_CMD_CHECK_CRC;
|
|
|
|
flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG);
|
|
|
|
debug("Sending CMD%d\n",cmd->cmdidx);
|
|
|
|
dwmci_writel(host, DWMCI_CMD, flags);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
mask = dwmci_readl(host, DWMCI_RINTSTS);
|
|
if (mask & DWMCI_INTMSK_CDONE) {
|
|
if (!data)
|
|
dwmci_writel(host, DWMCI_RINTSTS, mask);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == retry) {
|
|
debug("%s: Timeout.\n", __func__);
|
|
return TIMEOUT;
|
|
}
|
|
|
|
if (mask & DWMCI_INTMSK_RTO) {
|
|
/*
|
|
* Timeout here is not necessarily fatal. (e)MMC cards
|
|
* will splat here when they receive CMD55 as they do
|
|
* not support this command and that is exactly the way
|
|
* to tell them apart from SD cards. Thus, this output
|
|
* below shall be debug(). eMMC cards also do not favor
|
|
* CMD8, please keep that in mind.
|
|
*/
|
|
debug("%s: Response Timeout.\n", __func__);
|
|
return TIMEOUT;
|
|
} else if (mask & DWMCI_INTMSK_RE) {
|
|
debug("%s: Response Error.\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
cmd->response[0] = dwmci_readl(host, DWMCI_RESP3);
|
|
cmd->response[1] = dwmci_readl(host, DWMCI_RESP2);
|
|
cmd->response[2] = dwmci_readl(host, DWMCI_RESP1);
|
|
cmd->response[3] = dwmci_readl(host, DWMCI_RESP0);
|
|
} else {
|
|
cmd->response[0] = dwmci_readl(host, DWMCI_RESP0);
|
|
}
|
|
}
|
|
|
|
if (data) {
|
|
ret = dwmci_data_transfer(host, data);
|
|
|
|
/* only dma mode need it */
|
|
if (!host->fifo_mode) {
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
ctrl &= ~(DWMCI_DMA_EN);
|
|
dwmci_writel(host, DWMCI_CTRL, ctrl);
|
|
bounce_buffer_stop(&bbstate);
|
|
}
|
|
}
|
|
|
|
udelay(100);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
|
|
{
|
|
u32 div, status;
|
|
int timeout = 10000;
|
|
unsigned long sclk;
|
|
|
|
if ((freq == host->clock) || (freq == 0))
|
|
return 0;
|
|
/*
|
|
* If host->get_mmc_clk isn't defined,
|
|
* then assume that host->bus_hz is source clock value.
|
|
* host->bus_hz should be set by user.
|
|
*/
|
|
if (host->get_mmc_clk)
|
|
sclk = host->get_mmc_clk(host, freq);
|
|
else if (host->bus_hz)
|
|
sclk = host->bus_hz;
|
|
else {
|
|
debug("%s: Didn't get source clock value.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (sclk == freq)
|
|
div = 0; /* bypass mode */
|
|
else
|
|
div = DIV_ROUND_UP(sclk, 2 * freq);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, 0);
|
|
dwmci_writel(host, DWMCI_CLKSRC, 0);
|
|
|
|
dwmci_writel(host, DWMCI_CLKDIV, div);
|
|
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
|
|
DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
|
|
|
|
do {
|
|
status = dwmci_readl(host, DWMCI_CMD);
|
|
if (timeout-- < 0) {
|
|
debug("%s: Timeout!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (status & DWMCI_CMD_START);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE |
|
|
DWMCI_CLKEN_LOW_PWR);
|
|
|
|
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
|
|
DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
|
|
|
|
timeout = 10000;
|
|
do {
|
|
status = dwmci_readl(host, DWMCI_CMD);
|
|
if (timeout-- < 0) {
|
|
debug("%s: Timeout!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (status & DWMCI_CMD_START);
|
|
|
|
host->clock = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dwmci_set_ios(struct mmc *mmc)
|
|
{
|
|
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
|
|
u32 ctype, regs;
|
|
|
|
debug("Buswidth = %d, clock: %d\n", mmc->bus_width, mmc->clock);
|
|
|
|
dwmci_setup_bus(host, mmc->clock);
|
|
switch (mmc->bus_width) {
|
|
case 8:
|
|
ctype = DWMCI_CTYPE_8BIT;
|
|
break;
|
|
case 4:
|
|
ctype = DWMCI_CTYPE_4BIT;
|
|
break;
|
|
default:
|
|
ctype = DWMCI_CTYPE_1BIT;
|
|
break;
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_CTYPE, ctype);
|
|
|
|
regs = dwmci_readl(host, DWMCI_UHS_REG);
|
|
if (mmc->ddr_mode)
|
|
regs |= DWMCI_DDR_MODE;
|
|
else
|
|
regs &= ~DWMCI_DDR_MODE;
|
|
|
|
dwmci_writel(host, DWMCI_UHS_REG, regs);
|
|
|
|
if (host->clksel)
|
|
host->clksel(host);
|
|
}
|
|
|
|
static int dwmci_init(struct mmc *mmc)
|
|
{
|
|
struct dwmci_host *host = mmc->priv;
|
|
|
|
if (host->board_init)
|
|
host->board_init(host);
|
|
|
|
dwmci_writel(host, DWMCI_PWREN, 1);
|
|
|
|
if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
|
|
debug("%s[%d] Fail-reset!!\n", __func__, __LINE__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Enumerate at 400KHz */
|
|
dwmci_setup_bus(host, mmc->cfg->f_min);
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
|
|
dwmci_writel(host, DWMCI_INTMASK, 0);
|
|
|
|
dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF);
|
|
|
|
dwmci_writel(host, DWMCI_IDINTEN, 0);
|
|
dwmci_writel(host, DWMCI_BMOD, 1);
|
|
|
|
if (!host->fifoth_val) {
|
|
uint32_t fifo_size;
|
|
|
|
fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
|
|
fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
|
|
host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
|
|
TX_WMARK(fifo_size / 2);
|
|
}
|
|
dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, 0);
|
|
dwmci_writel(host, DWMCI_CLKSRC, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mmc_ops dwmci_ops = {
|
|
.send_cmd = dwmci_send_cmd,
|
|
.set_ios = dwmci_set_ios,
|
|
.init = dwmci_init,
|
|
};
|
|
|
|
int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk)
|
|
{
|
|
host->cfg.name = host->name;
|
|
host->cfg.ops = &dwmci_ops;
|
|
host->cfg.f_min = min_clk;
|
|
host->cfg.f_max = max_clk;
|
|
|
|
host->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
|
|
host->cfg.host_caps = host->caps;
|
|
|
|
if (host->buswidth == 8) {
|
|
host->cfg.host_caps |= MMC_MODE_8BIT;
|
|
host->cfg.host_caps &= ~MMC_MODE_4BIT;
|
|
} else {
|
|
host->cfg.host_caps |= MMC_MODE_4BIT;
|
|
host->cfg.host_caps &= ~MMC_MODE_8BIT;
|
|
}
|
|
host->cfg.host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
|
|
|
|
host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
host->mmc = mmc_create(&host->cfg, host);
|
|
if (host->mmc == NULL)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|