mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
10cbe3b6a4
These are all the files which use the API incorrectly but did not get built using MAKEALL -a powerpc|arm. I have no compiler for them, but the remaining issues should be far less than without this patch. Any outstanding issues are left to the maintainers of boards that use these drivers. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
971 lines
26 KiB
C
971 lines
26 KiB
C
/*
|
|
* Altera 10/100/1000 triple speed ethernet mac driver
|
|
*
|
|
* Copyright (C) 2008 Altera Corporation.
|
|
* Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <command.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/dma-mapping.h>
|
|
#include <miiphy.h>
|
|
#include "altera_tse.h"
|
|
|
|
/* sgdma debug - print descriptor */
|
|
static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc)
|
|
{
|
|
debug("SGDMA DEBUG :\n");
|
|
debug("desc->source : 0x%x \n", (unsigned int)desc->source);
|
|
debug("desc->destination : 0x%x \n", (unsigned int)desc->destination);
|
|
debug("desc->next : 0x%x \n", (unsigned int)desc->next);
|
|
debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad);
|
|
debug("desc->destination_pad : 0x%x \n",
|
|
(unsigned int)desc->destination_pad);
|
|
debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad);
|
|
debug("desc->bytes_to_transfer : 0x%x \n",
|
|
(unsigned int)desc->bytes_to_transfer);
|
|
debug("desc->actual_bytes_transferred : 0x%x \n",
|
|
(unsigned int)desc->actual_bytes_transferred);
|
|
debug("desc->descriptor_status : 0x%x \n",
|
|
(unsigned int)desc->descriptor_status);
|
|
debug("desc->descriptor_control : 0x%x \n",
|
|
(unsigned int)desc->descriptor_control);
|
|
}
|
|
|
|
/* This is a generic routine that the SGDMA mode-specific routines
|
|
* call to populate a descriptor.
|
|
* arg1 :pointer to first SGDMA descriptor.
|
|
* arg2 :pointer to next SGDMA descriptor.
|
|
* arg3 :Address to where data to be written.
|
|
* arg4 :Address from where data to be read.
|
|
* arg5 :no of byte to transaction.
|
|
* arg6 :variable indicating to generate start of packet or not
|
|
* arg7 :read fixed
|
|
* arg8 :write fixed
|
|
* arg9 :read burst
|
|
* arg10 :write burst
|
|
* arg11 :atlantic_channel number
|
|
*/
|
|
static void alt_sgdma_construct_descriptor_burst(
|
|
volatile struct alt_sgdma_descriptor *desc,
|
|
volatile struct alt_sgdma_descriptor *next,
|
|
unsigned int *read_addr,
|
|
unsigned int *write_addr,
|
|
unsigned short length_or_eop,
|
|
int generate_eop,
|
|
int read_fixed,
|
|
int write_fixed_or_sop,
|
|
int read_burst,
|
|
int write_burst,
|
|
unsigned char atlantic_channel)
|
|
{
|
|
/*
|
|
* Mark the "next" descriptor as "not" owned by hardware. This prevents
|
|
* The SGDMA controller from continuing to process the chain. This is
|
|
* done as a single IO write to bypass cache, without flushing
|
|
* the entire descriptor, since only the 8-bit descriptor status must
|
|
* be flushed.
|
|
*/
|
|
if (!next)
|
|
debug("Next descriptor not defined!!\n");
|
|
|
|
next->descriptor_control = (next->descriptor_control &
|
|
~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK);
|
|
|
|
desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF);
|
|
desc->destination =
|
|
(unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF);
|
|
desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF);
|
|
desc->source_pad = 0x0;
|
|
desc->destination_pad = 0x0;
|
|
desc->next_pad = 0x0;
|
|
desc->bytes_to_transfer = length_or_eop;
|
|
desc->actual_bytes_transferred = 0;
|
|
desc->descriptor_status = 0x0;
|
|
|
|
/* SGDMA burst not currently supported */
|
|
desc->read_burst = 0;
|
|
desc->write_burst = 0;
|
|
|
|
/*
|
|
* Set the descriptor control block as follows:
|
|
* - Set "owned by hardware" bit
|
|
* - Optionally set "generate EOP" bit
|
|
* - Optionally set the "read from fixed address" bit
|
|
* - Optionally set the "write to fixed address bit (which serves
|
|
* serves as a "generate SOP" control bit in memory-to-stream mode).
|
|
* - Set the 4-bit atlantic channel, if specified
|
|
*
|
|
* Note this step is performed after all other descriptor information
|
|
* has been filled out so that, if the controller already happens to be
|
|
* pointing at this descriptor, it will not run (via the "owned by
|
|
* hardware" bit) until all other descriptor has been set up.
|
|
*/
|
|
|
|
desc->descriptor_control =
|
|
((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) |
|
|
(generate_eop ?
|
|
ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) |
|
|
(read_fixed ?
|
|
ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) |
|
|
(write_fixed_or_sop ?
|
|
ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) |
|
|
(atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0)
|
|
);
|
|
}
|
|
|
|
static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
|
|
volatile struct alt_sgdma_descriptor *desc)
|
|
{
|
|
unsigned int status;
|
|
int counter = 0;
|
|
|
|
/* Wait for any pending transfers to complete */
|
|
alt_sgdma_print_desc(desc);
|
|
status = dev->status;
|
|
|
|
counter = 0;
|
|
while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
|
|
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
|
break;
|
|
}
|
|
|
|
if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
|
debug("Timeout waiting sgdma in do sync!\n");
|
|
|
|
/*
|
|
* Clear any (previous) status register information
|
|
* that might occlude our error checking later.
|
|
*/
|
|
dev->status = 0xFF;
|
|
|
|
/* Point the controller at the descriptor */
|
|
dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
|
|
debug("next desc in sgdma 0x%x\n",
|
|
(unsigned int)dev->next_descriptor_pointer);
|
|
|
|
/*
|
|
* Set up SGDMA controller to:
|
|
* - Disable interrupt generation
|
|
* - Run once a valid descriptor is written to controller
|
|
* - Stop on an error with any particular descriptor
|
|
*/
|
|
dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
|
|
ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
|
|
|
|
/* Wait for the descriptor (chain) to complete */
|
|
status = dev->status;
|
|
debug("wait for sgdma....");
|
|
while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK)
|
|
;
|
|
debug("done\n");
|
|
|
|
/* Clear Run */
|
|
dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK));
|
|
|
|
/* Get & clear status register contents */
|
|
status = dev->status;
|
|
dev->status = 0xFF;
|
|
|
|
/* we really should check if the transfer completes properly */
|
|
debug("tx sgdma status = 0x%x", status);
|
|
return 0;
|
|
}
|
|
|
|
static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
|
|
volatile struct alt_sgdma_descriptor *desc)
|
|
{
|
|
unsigned int status;
|
|
int counter = 0;
|
|
|
|
/* Wait for any pending transfers to complete */
|
|
alt_sgdma_print_desc(desc);
|
|
status = dev->status;
|
|
|
|
counter = 0;
|
|
while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
|
|
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
|
break;
|
|
}
|
|
|
|
if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
|
debug("Timeout waiting sgdma in do async!\n");
|
|
|
|
/*
|
|
* Clear the RUN bit in the control register. This is needed
|
|
* to restart the SGDMA engine later on.
|
|
*/
|
|
dev->control = 0;
|
|
|
|
/*
|
|
* Clear any (previous) status register information
|
|
* that might occlude our error checking later.
|
|
*/
|
|
dev->status = 0xFF;
|
|
|
|
/* Point the controller at the descriptor */
|
|
dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
|
|
|
|
/*
|
|
* Set up SGDMA controller to:
|
|
* - Disable interrupt generation
|
|
* - Run once a valid descriptor is written to controller
|
|
* - Stop on an error with any particular descriptor
|
|
*/
|
|
dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
|
|
ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
|
|
|
|
/* we really should check if the transfer completes properly */
|
|
return 0;
|
|
}
|
|
|
|
/* u-boot interface */
|
|
static int tse_adjust_link(struct altera_tse_priv *priv)
|
|
{
|
|
unsigned int refvar;
|
|
|
|
refvar = priv->mac_dev->command_config.image;
|
|
|
|
if (!(priv->duplexity))
|
|
refvar |= ALTERA_TSE_CMD_HD_ENA_MSK;
|
|
else
|
|
refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK;
|
|
|
|
switch (priv->speed) {
|
|
case 1000:
|
|
refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK;
|
|
refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
|
|
break;
|
|
case 100:
|
|
refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
|
|
refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
|
|
break;
|
|
case 10:
|
|
refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
|
|
refvar |= ALTERA_TSE_CMD_ENA_10_MSK;
|
|
break;
|
|
}
|
|
priv->mac_dev->command_config.image = refvar;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tse_eth_send(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
struct altera_tse_priv *priv = dev->priv;
|
|
volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
|
|
volatile struct alt_sgdma_descriptor *tx_desc =
|
|
(volatile struct alt_sgdma_descriptor *)priv->tx_desc;
|
|
|
|
volatile struct alt_sgdma_descriptor *tx_desc_cur =
|
|
(volatile struct alt_sgdma_descriptor *)&tx_desc[0];
|
|
|
|
flush_dcache_range((unsigned long)packet,
|
|
(unsigned long)packet + length);
|
|
alt_sgdma_construct_descriptor_burst(
|
|
(volatile struct alt_sgdma_descriptor *)&tx_desc[0],
|
|
(volatile struct alt_sgdma_descriptor *)&tx_desc[1],
|
|
(unsigned int *)packet, /* read addr */
|
|
(unsigned int *)0,
|
|
length, /* length or EOP ,will change for each tx */
|
|
0x1, /* gen eop */
|
|
0x0, /* read fixed */
|
|
0x1, /* write fixed or sop */
|
|
0x0, /* read burst */
|
|
0x0, /* write burst */
|
|
0x0 /* channel */
|
|
);
|
|
debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length);
|
|
|
|
/* send the packet */
|
|
debug("sending packet\n");
|
|
alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur);
|
|
debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred);
|
|
return tx_desc_cur->actual_bytes_transferred;
|
|
}
|
|
|
|
static int tse_eth_rx(struct eth_device *dev)
|
|
{
|
|
int packet_length = 0;
|
|
struct altera_tse_priv *priv = dev->priv;
|
|
volatile struct alt_sgdma_descriptor *rx_desc =
|
|
(volatile struct alt_sgdma_descriptor *)priv->rx_desc;
|
|
volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0];
|
|
|
|
if (rx_desc_cur->descriptor_status &
|
|
ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) {
|
|
debug("got packet\n");
|
|
packet_length = rx_desc->actual_bytes_transferred;
|
|
NetReceive(NetRxPackets[0], packet_length);
|
|
|
|
/* start descriptor again */
|
|
flush_dcache_range((unsigned long)(NetRxPackets[0]),
|
|
(unsigned long)(NetRxPackets[0]) + PKTSIZE_ALIGN);
|
|
alt_sgdma_construct_descriptor_burst(
|
|
(volatile struct alt_sgdma_descriptor *)&rx_desc[0],
|
|
(volatile struct alt_sgdma_descriptor *)&rx_desc[1],
|
|
(unsigned int)0x0, /* read addr */
|
|
(unsigned int *)NetRxPackets[0],
|
|
0x0, /* length or EOP */
|
|
0x0, /* gen eop */
|
|
0x0, /* read fixed */
|
|
0x0, /* write fixed or sop */
|
|
0x0, /* read burst */
|
|
0x0, /* write burst */
|
|
0x0 /* channel */
|
|
);
|
|
|
|
/* setup the sgdma */
|
|
alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]);
|
|
|
|
return packet_length;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void tse_eth_halt(struct eth_device *dev)
|
|
{
|
|
/* don't do anything! */
|
|
/* this gets called after each uboot */
|
|
/* network command. don't need to reset the thing all of the time */
|
|
}
|
|
|
|
static void tse_eth_reset(struct eth_device *dev)
|
|
{
|
|
/* stop sgdmas, disable tse receive */
|
|
struct altera_tse_priv *priv = dev->priv;
|
|
volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
|
|
volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
|
|
volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
|
|
int counter;
|
|
volatile struct alt_sgdma_descriptor *rx_desc =
|
|
(volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0];
|
|
|
|
/* clear rx desc & wait for sgdma to complete */
|
|
rx_desc->descriptor_control = 0;
|
|
rx_sgdma->control = 0;
|
|
counter = 0;
|
|
while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
|
|
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
|
break;
|
|
}
|
|
|
|
if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
|
|
debug("Timeout waiting for rx sgdma!\n");
|
|
rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
|
|
rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
|
|
}
|
|
|
|
counter = 0;
|
|
tx_sgdma->control = 0;
|
|
while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
|
|
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
|
|
break;
|
|
}
|
|
|
|
if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
|
|
debug("Timeout waiting for tx sgdma!\n");
|
|
tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
|
|
tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
|
|
}
|
|
/* reset the mac */
|
|
mac_dev->command_config.bits.transmit_enable = 1;
|
|
mac_dev->command_config.bits.receive_enable = 1;
|
|
mac_dev->command_config.bits.software_reset = 1;
|
|
|
|
counter = 0;
|
|
while (mac_dev->command_config.bits.software_reset) {
|
|
if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR)
|
|
break;
|
|
}
|
|
|
|
if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR)
|
|
debug("TSEMAC SW reset bit never cleared!\n");
|
|
}
|
|
|
|
static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum)
|
|
{
|
|
volatile struct alt_tse_mac *mac_dev;
|
|
unsigned int *mdio_regs;
|
|
unsigned int data;
|
|
u16 value;
|
|
|
|
mac_dev = priv->mac_dev;
|
|
|
|
/* set mdio address */
|
|
mac_dev->mdio_phy1_addr = priv->phyaddr;
|
|
mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
|
|
|
|
/* get the data */
|
|
data = mdio_regs[regnum];
|
|
|
|
value = data & 0xffff;
|
|
|
|
return value;
|
|
}
|
|
|
|
static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum,
|
|
unsigned int value)
|
|
{
|
|
volatile struct alt_tse_mac *mac_dev;
|
|
unsigned int *mdio_regs;
|
|
unsigned int data;
|
|
|
|
mac_dev = priv->mac_dev;
|
|
|
|
/* set mdio address */
|
|
mac_dev->mdio_phy1_addr = priv->phyaddr;
|
|
mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
|
|
|
|
/* get the data */
|
|
data = (unsigned int)value;
|
|
|
|
mdio_regs[regnum] = data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* MDIO access to phy */
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
|
|
static int altera_tse_miiphy_write(const char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short value)
|
|
{
|
|
struct eth_device *dev;
|
|
struct altera_tse_priv *priv;
|
|
dev = eth_get_dev_by_name(devname);
|
|
priv = dev->priv;
|
|
|
|
tse_mdio_write(priv, (uint) reg, (uint) value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int altera_tse_miiphy_read(const char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short *value)
|
|
{
|
|
struct eth_device *dev;
|
|
struct altera_tse_priv *priv;
|
|
volatile struct alt_tse_mac *mac_dev;
|
|
unsigned int *mdio_regs;
|
|
|
|
dev = eth_get_dev_by_name(devname);
|
|
priv = dev->priv;
|
|
|
|
mac_dev = priv->mac_dev;
|
|
mac_dev->mdio_phy1_addr = (int)addr;
|
|
mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
|
|
|
|
*value = 0xffff & mdio_regs[reg];
|
|
|
|
return 0;
|
|
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Also copied from tsec.c
|
|
*/
|
|
/* Parse the status register for link, and then do
|
|
* auto-negotiation
|
|
*/
|
|
static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv)
|
|
{
|
|
/*
|
|
* Wait if the link is up, and autonegotiation is in progress
|
|
* (ie - we're capable and it's not done)
|
|
*/
|
|
mii_reg = tse_mdio_read(priv, MIIM_STATUS);
|
|
|
|
if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE)
|
|
&& !(mii_reg & BMSR_ANEGCOMPLETE)) {
|
|
int i = 0;
|
|
|
|
puts("Waiting for PHY auto negotiation to complete");
|
|
while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
|
|
/*
|
|
* Timeout reached ?
|
|
*/
|
|
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
|
|
puts(" TIMEOUT !\n");
|
|
priv->link = 0;
|
|
return 0;
|
|
}
|
|
|
|
if ((i++ % 1000) == 0)
|
|
putc('.');
|
|
udelay(1000); /* 1 ms */
|
|
mii_reg = tse_mdio_read(priv, MIIM_STATUS);
|
|
}
|
|
puts(" done\n");
|
|
priv->link = 1;
|
|
udelay(500000); /* another 500 ms (results in faster booting) */
|
|
} else {
|
|
if (mii_reg & MIIM_STATUS_LINK) {
|
|
debug("Link is up\n");
|
|
priv->link = 1;
|
|
} else {
|
|
debug("Link is down\n");
|
|
priv->link = 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Parse the 88E1011's status register for speed and duplex
|
|
* information
|
|
*/
|
|
static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv)
|
|
{
|
|
uint speed;
|
|
|
|
mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
|
|
|
|
if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
|
|
!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
|
|
int i = 0;
|
|
|
|
puts("Waiting for PHY realtime link");
|
|
while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
|
|
/* Timeout reached ? */
|
|
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
|
|
puts(" TIMEOUT !\n");
|
|
priv->link = 0;
|
|
break;
|
|
}
|
|
|
|
if ((i++ == 1000) == 0) {
|
|
i = 0;
|
|
puts(".");
|
|
}
|
|
udelay(1000); /* 1 ms */
|
|
mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
|
|
}
|
|
puts(" done\n");
|
|
udelay(500000); /* another 500 ms (results in faster booting) */
|
|
} else {
|
|
if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
|
|
priv->link = 1;
|
|
else
|
|
priv->link = 0;
|
|
}
|
|
|
|
if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
|
|
priv->duplexity = 1;
|
|
else
|
|
priv->duplexity = 0;
|
|
|
|
speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
|
|
|
|
switch (speed) {
|
|
case MIIM_88E1011_PHYSTAT_GBIT:
|
|
priv->speed = 1000;
|
|
debug("PHY Speed is 1000Mbit\n");
|
|
break;
|
|
case MIIM_88E1011_PHYSTAT_100:
|
|
debug("PHY Speed is 100Mbit\n");
|
|
priv->speed = 100;
|
|
break;
|
|
default:
|
|
debug("PHY Speed is 10Mbit\n");
|
|
priv->speed = 10;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv)
|
|
{
|
|
uint mii_data = tse_mdio_read(priv, mii_reg);
|
|
mii_data &= 0xfff0;
|
|
if ((priv->flags >= 1) && (priv->flags <= 4))
|
|
mii_data |= 0xb;
|
|
else if (priv->flags == 5)
|
|
mii_data |= 0x4;
|
|
|
|
return mii_data;
|
|
}
|
|
|
|
static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv)
|
|
{
|
|
uint mii_data = tse_mdio_read(priv, mii_reg);
|
|
mii_data &= ~0x82;
|
|
if ((priv->flags >= 1) && (priv->flags <= 4))
|
|
mii_data |= 0x82;
|
|
|
|
return mii_data;
|
|
}
|
|
|
|
/*
|
|
* Returns which value to write to the control register.
|
|
* For 10/100, the value is slightly different
|
|
*/
|
|
static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv)
|
|
{
|
|
return MIIM_CONTROL_INIT;
|
|
}
|
|
|
|
/*
|
|
* PHY & MDIO code
|
|
* Need to add SGMII stuff
|
|
*
|
|
*/
|
|
|
|
static struct phy_info phy_info_M88E1111S = {
|
|
0x01410cc,
|
|
"Marvell 88E1111S",
|
|
4,
|
|
(struct phy_cmd[]){ /* config */
|
|
/* Reset and configure the PHY */
|
|
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
|
|
{MIIM_88E1111_PHY_EXT_SR, 0x848f,
|
|
&mii_m88e1111s_setmode_sr},
|
|
/* Delay RGMII TX and RX */
|
|
{MIIM_88E1111_PHY_EXT_CR, 0x0cd2,
|
|
&mii_m88e1111s_setmode_cr},
|
|
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
|
|
{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
|
|
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
|
|
{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
|
|
{miim_end,}
|
|
},
|
|
(struct phy_cmd[]){ /* startup */
|
|
/* Status is read once to clear old link state */
|
|
{MIIM_STATUS, miim_read, NULL},
|
|
/* Auto-negotiate */
|
|
{MIIM_STATUS, miim_read, &mii_parse_sr},
|
|
/* Read the status */
|
|
{MIIM_88E1011_PHY_STATUS, miim_read,
|
|
&mii_parse_88E1011_psr},
|
|
{miim_end,}
|
|
},
|
|
(struct phy_cmd[]){ /* shutdown */
|
|
{miim_end,}
|
|
},
|
|
};
|
|
|
|
/* a generic flavor. */
|
|
static struct phy_info phy_info_generic = {
|
|
0,
|
|
"Unknown/Generic PHY",
|
|
32,
|
|
(struct phy_cmd[]){ /* config */
|
|
{MII_BMCR, BMCR_RESET, NULL},
|
|
{MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL},
|
|
{miim_end,}
|
|
},
|
|
(struct phy_cmd[]){ /* startup */
|
|
{MII_BMSR, miim_read, NULL},
|
|
{MII_BMSR, miim_read, &mii_parse_sr},
|
|
{miim_end,}
|
|
},
|
|
(struct phy_cmd[]){ /* shutdown */
|
|
{miim_end,}
|
|
}
|
|
};
|
|
|
|
static struct phy_info *phy_info[] = {
|
|
&phy_info_M88E1111S,
|
|
NULL
|
|
};
|
|
|
|
/* Grab the identifier of the device's PHY, and search through
|
|
* all of the known PHYs to see if one matches. If so, return
|
|
* it, if not, return NULL
|
|
*/
|
|
static struct phy_info *get_phy_info(struct eth_device *dev)
|
|
{
|
|
struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
|
|
uint phy_reg, phy_ID;
|
|
int i;
|
|
struct phy_info *theInfo = NULL;
|
|
|
|
/* Grab the bits from PHYIR1, and put them in the upper half */
|
|
phy_reg = tse_mdio_read(priv, MIIM_PHYIR1);
|
|
phy_ID = (phy_reg & 0xffff) << 16;
|
|
|
|
/* Grab the bits from PHYIR2, and put them in the lower half */
|
|
phy_reg = tse_mdio_read(priv, MIIM_PHYIR2);
|
|
phy_ID |= (phy_reg & 0xffff);
|
|
|
|
/* loop through all the known PHY types, and find one that */
|
|
/* matches the ID we read from the PHY. */
|
|
for (i = 0; phy_info[i]; i++) {
|
|
if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
|
|
theInfo = phy_info[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (theInfo == NULL) {
|
|
theInfo = &phy_info_generic;
|
|
debug("%s: No support for PHY id %x; assuming generic\n",
|
|
dev->name, phy_ID);
|
|
} else
|
|
debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
|
|
|
|
return theInfo;
|
|
}
|
|
|
|
/* Execute the given series of commands on the given device's
|
|
* PHY, running functions as necessary
|
|
*/
|
|
static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd)
|
|
{
|
|
int i;
|
|
uint result;
|
|
|
|
for (i = 0; cmd->mii_reg != miim_end; i++) {
|
|
if (cmd->mii_data == miim_read) {
|
|
result = tse_mdio_read(priv, cmd->mii_reg);
|
|
|
|
if (cmd->funct != NULL)
|
|
(*(cmd->funct)) (result, priv);
|
|
|
|
} else {
|
|
if (cmd->funct != NULL)
|
|
result = (*(cmd->funct)) (cmd->mii_reg, priv);
|
|
else
|
|
result = cmd->mii_data;
|
|
|
|
tse_mdio_write(priv, cmd->mii_reg, result);
|
|
|
|
}
|
|
cmd++;
|
|
}
|
|
}
|
|
|
|
/* Phy init code */
|
|
static int init_phy(struct eth_device *dev)
|
|
{
|
|
struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
|
|
struct phy_info *curphy;
|
|
|
|
/* Get the cmd structure corresponding to the attached
|
|
* PHY */
|
|
curphy = get_phy_info(dev);
|
|
|
|
if (curphy == NULL) {
|
|
priv->phyinfo = NULL;
|
|
debug("%s: No PHY found\n", dev->name);
|
|
|
|
return 0;
|
|
} else
|
|
debug("%s found\n", curphy->name);
|
|
priv->phyinfo = curphy;
|
|
|
|
phy_run_commands(priv, priv->phyinfo->config);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tse_set_mac_address(struct eth_device *dev)
|
|
{
|
|
struct altera_tse_priv *priv = dev->priv;
|
|
volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
|
|
|
|
debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n",
|
|
dev->enetaddr[5], dev->enetaddr[4],
|
|
dev->enetaddr[3], dev->enetaddr[2],
|
|
dev->enetaddr[1], dev->enetaddr[0]);
|
|
mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 |
|
|
(dev->enetaddr[2]) << 16 |
|
|
(dev->enetaddr[1]) << 8 | (dev->enetaddr[0]));
|
|
|
|
mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 |
|
|
(dev->enetaddr[4])) & 0xFFFF);
|
|
|
|
/* Set the MAC address */
|
|
mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0;
|
|
mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1;
|
|
|
|
/* Set the MAC address */
|
|
mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0;
|
|
mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1;
|
|
|
|
/* Set the MAC address */
|
|
mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0;
|
|
mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1;
|
|
|
|
/* Set the MAC address */
|
|
mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0;
|
|
mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1;
|
|
return 0;
|
|
}
|
|
|
|
static int tse_eth_init(struct eth_device *dev, bd_t * bd)
|
|
{
|
|
int dat;
|
|
struct altera_tse_priv *priv = dev->priv;
|
|
volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
|
|
volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
|
|
volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
|
|
volatile struct alt_sgdma_descriptor *rx_desc_cur =
|
|
(volatile struct alt_sgdma_descriptor *)&rx_desc[0];
|
|
|
|
/* stop controller */
|
|
debug("Reseting TSE & SGDMAs\n");
|
|
tse_eth_reset(dev);
|
|
|
|
/* start the phy */
|
|
debug("Configuring PHY\n");
|
|
phy_run_commands(priv, priv->phyinfo->startup);
|
|
|
|
/* need to create sgdma */
|
|
debug("Configuring tx desc\n");
|
|
alt_sgdma_construct_descriptor_burst(
|
|
(volatile struct alt_sgdma_descriptor *)&tx_desc[0],
|
|
(volatile struct alt_sgdma_descriptor *)&tx_desc[1],
|
|
(unsigned int *)NULL, /* read addr */
|
|
(unsigned int *)0,
|
|
0, /* length or EOP ,will change for each tx */
|
|
0x1, /* gen eop */
|
|
0x0, /* read fixed */
|
|
0x1, /* write fixed or sop */
|
|
0x0, /* read burst */
|
|
0x0, /* write burst */
|
|
0x0 /* channel */
|
|
);
|
|
debug("Configuring rx desc\n");
|
|
flush_dcache_range((unsigned long)(NetRxPackets[0]),
|
|
(unsigned long)(NetRxPackets[0]) + PKTSIZE_ALIGN);
|
|
alt_sgdma_construct_descriptor_burst(
|
|
(volatile struct alt_sgdma_descriptor *)&rx_desc[0],
|
|
(volatile struct alt_sgdma_descriptor *)&rx_desc[1],
|
|
(unsigned int)0x0, /* read addr */
|
|
(unsigned int *)NetRxPackets[0],
|
|
0x0, /* length or EOP */
|
|
0x0, /* gen eop */
|
|
0x0, /* read fixed */
|
|
0x0, /* write fixed or sop */
|
|
0x0, /* read burst */
|
|
0x0, /* write burst */
|
|
0x0 /* channel */
|
|
);
|
|
/* start rx async transfer */
|
|
debug("Starting rx sgdma\n");
|
|
alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur);
|
|
|
|
/* start TSE */
|
|
debug("Configuring TSE Mac\n");
|
|
/* Initialize MAC registers */
|
|
mac_dev->max_frame_length = PKTSIZE_ALIGN;
|
|
mac_dev->rx_almost_empty_threshold = 8;
|
|
mac_dev->rx_almost_full_threshold = 8;
|
|
mac_dev->tx_almost_empty_threshold = 8;
|
|
mac_dev->tx_almost_full_threshold = 3;
|
|
mac_dev->tx_sel_empty_threshold =
|
|
CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
|
|
mac_dev->tx_sel_full_threshold = 0;
|
|
mac_dev->rx_sel_empty_threshold =
|
|
CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
|
|
mac_dev->rx_sel_full_threshold = 0;
|
|
|
|
/* NO Shift */
|
|
mac_dev->rx_cmd_stat.bits.rx_shift16 = 0;
|
|
mac_dev->tx_cmd_stat.bits.tx_shift16 = 0;
|
|
|
|
/* enable MAC */
|
|
dat = 0;
|
|
dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK;
|
|
|
|
mac_dev->command_config.image = dat;
|
|
|
|
/* configure the TSE core */
|
|
/* -- output clocks, */
|
|
/* -- and later config stuff for SGMII */
|
|
if (priv->link) {
|
|
debug("Adjusting TSE to link speed\n");
|
|
tse_adjust_link(priv);
|
|
}
|
|
|
|
return priv->link ? 0 : -1;
|
|
}
|
|
|
|
/* TSE init code */
|
|
int altera_tse_initialize(u8 dev_num, int mac_base,
|
|
int sgdma_rx_base, int sgdma_tx_base,
|
|
u32 sgdma_desc_base, u32 sgdma_desc_size)
|
|
{
|
|
struct altera_tse_priv *priv;
|
|
struct eth_device *dev;
|
|
struct alt_sgdma_descriptor *rx_desc;
|
|
struct alt_sgdma_descriptor *tx_desc;
|
|
unsigned long dma_handle;
|
|
|
|
dev = (struct eth_device *)malloc(sizeof *dev);
|
|
|
|
if (NULL == dev)
|
|
return 0;
|
|
|
|
memset(dev, 0, sizeof *dev);
|
|
|
|
priv = malloc(sizeof(*priv));
|
|
|
|
if (!priv) {
|
|
free(dev);
|
|
return 0;
|
|
}
|
|
if (sgdma_desc_size) {
|
|
if (sgdma_desc_size < (sizeof(*tx_desc) * (3 + PKTBUFSRX))) {
|
|
printf("ALTERA_TSE-%hu: "
|
|
"descriptor memory is too small\n", dev_num);
|
|
free(priv);
|
|
free(dev);
|
|
return 0;
|
|
}
|
|
tx_desc = (struct alt_sgdma_descriptor *)sgdma_desc_base;
|
|
} else {
|
|
tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX),
|
|
&dma_handle);
|
|
}
|
|
|
|
rx_desc = tx_desc + 2;
|
|
debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc);
|
|
debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc);
|
|
|
|
if (!tx_desc) {
|
|
free(priv);
|
|
free(dev);
|
|
return 0;
|
|
}
|
|
memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
|
|
memset(tx_desc, 0, (sizeof *tx_desc) * 2);
|
|
|
|
/* initialize tse priv */
|
|
priv->mac_dev = (volatile struct alt_tse_mac *)mac_base;
|
|
priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base;
|
|
priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base;
|
|
priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR;
|
|
priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS;
|
|
priv->rx_desc = rx_desc;
|
|
priv->tx_desc = tx_desc;
|
|
|
|
/* init eth structure */
|
|
dev->priv = priv;
|
|
dev->init = tse_eth_init;
|
|
dev->halt = tse_eth_halt;
|
|
dev->send = tse_eth_send;
|
|
dev->recv = tse_eth_rx;
|
|
dev->write_hwaddr = tse_set_mac_address;
|
|
sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num);
|
|
|
|
eth_register(dev);
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
|
|
miiphy_register(dev->name, altera_tse_miiphy_read,
|
|
altera_tse_miiphy_write);
|
|
#endif
|
|
|
|
init_phy(dev);
|
|
|
|
return 1;
|
|
}
|