u-boot/board/h2200/h2200.c
Kishon Vijay Abraham I cc4f1558a7 h2200: Fix build error
Commit <8bfc288c3955> ("usb: gadget: ether: Perform board
initialization from ethernet gadget driver") added board_usb_init
and board_usb_cleanup in ethernet gadget driver. But h2200 board
didn't have board_usb_init and board_usb_cleanup implementations.

This introduced the following build errors
+drivers/usb/gadget/built-in.o: In function `usb_eth_halt':
+drivers/usb/gadget/ether.c:2498: undefined reference to `board_usb_cleanup'
+drivers/usb/gadget/built-in.o: In function `usb_eth_init':
+drivers/usb/gadget/ether.c:2316: undefined reference to `board_usb_init'

Fix it here by adding empty board_usb_init and board_usb_cleanup
functions in h2200.c.

Fixes: <8bfc288c3955> ("usb: gadget: ether: Perform board
initialization from ethernet gadget driver")

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-09-07 13:41:04 +02:00

73 lines
1.2 KiB
C

/*
* iPAQ h2200 board configuration
*
* Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/pxa.h>
#include <asm/arch/pxa-regs.h>
#include <asm/io.h>
#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
int board_eth_init(bd_t *bis)
{
usb_eth_initialize(bis);
return 0;
}
void reset_cpu(ulong ignore)
{
/* Enable VLIO interface on Hamcop */
writeb(0x1, 0x4000);
/* Reset board (cold reset) */
writeb(0xff, 0x4002);
}
int board_init(void)
{
/* We have RAM, disable cache */
dcache_disable();
icache_disable();
gd->bd->bi_arch_number = MACH_TYPE_H2200;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
/* Let host see that device is disconnected */
udc_disconnect();
mdelay(500);
return 0;
}
int dram_init(void)
{
/*
* Everything except MSC0 was already set up by
* 1st stage bootloader.
*
* This setting enables access to companion chip.
*/
clrsetbits_le32(MSC0, 0xffffffff, CONFIG_SYS_MSC0_VAL);
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
#ifdef CONFIG_USB_GADGET_PXA2XX
int board_usb_init(int index, enum usb_init_type init)
{
return 0;
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
return 0;
}
#endif