mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
7aa5598aac
Add in an init function for the drivers/power framework so we can dump and read the registers via i2c. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@ti.com>
119 lines
2.9 KiB
C
119 lines
2.9 KiB
C
/*
|
|
* (C) Copyright 2011-2013
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <asm/errno.h>
|
|
#include <power/pmic.h>
|
|
#include <power/tps65218.h>
|
|
|
|
/**
|
|
* tps65218_reg_write() - Generic function that can write a TPS65218 PMIC
|
|
* register or bit field regardless of protection
|
|
* level.
|
|
*
|
|
* @prot_level: Register password protection. Use
|
|
* TPS65218_PROT_LEVEL_NONE,
|
|
* TPS65218_PROT_LEVEL_1 or TPS65218_PROT_LEVEL_2
|
|
* @dest_reg: Register address to write.
|
|
* @dest_val: Value to write.
|
|
* @mask: Bit mask (8 bits) to be applied. Function will only
|
|
* change bits that are set in the bit mask.
|
|
*
|
|
* @return: 0 for success, not 0 on failure, as per the i2c API
|
|
*/
|
|
int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
|
|
uchar mask)
|
|
{
|
|
uchar read_val;
|
|
uchar xor_reg;
|
|
int ret;
|
|
|
|
/*
|
|
* If we are affecting only a bit field, read dest_reg and apply the
|
|
* mask
|
|
*/
|
|
if (mask != TPS65218_MASK_ALL_BITS) {
|
|
ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1);
|
|
if (ret)
|
|
return ret;
|
|
read_val &= (~mask);
|
|
read_val |= (dest_val & mask);
|
|
dest_val = read_val;
|
|
}
|
|
|
|
if (prot_level > 0) {
|
|
xor_reg = dest_reg ^ TPS65218_PASSWORD_UNLOCK;
|
|
ret = i2c_write(TPS65218_CHIP_PM, TPS65218_PASSWORD, 1,
|
|
&xor_reg, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_write(TPS65218_CHIP_PM, dest_reg, 1, &dest_val, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (prot_level == TPS65218_PROT_LEVEL_2) {
|
|
ret = i2c_write(TPS65218_CHIP_PM, TPS65218_PASSWORD, 1,
|
|
&xor_reg, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_write(TPS65218_CHIP_PM, dest_reg, 1, &dest_val, 1);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tps65218_voltage_update() - Function to change a voltage level, as this
|
|
* is a multi-step process.
|
|
* @dc_cntrl_reg: DC voltage control register to change.
|
|
* @volt_sel: New value for the voltage register
|
|
* @return: 0 for success, not 0 on failure.
|
|
*/
|
|
int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel)
|
|
{
|
|
if ((dc_cntrl_reg != TPS65218_DCDC1) &&
|
|
(dc_cntrl_reg != TPS65218_DCDC2))
|
|
return 1;
|
|
|
|
/* set voltage level */
|
|
if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, dc_cntrl_reg, volt_sel,
|
|
TPS65218_MASK_ALL_BITS))
|
|
return 1;
|
|
|
|
/* set GO bit to initiate voltage transition */
|
|
if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, TPS65218_SLEW,
|
|
TPS65218_DCDC_GO, TPS65218_DCDC_GO))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int power_tps65218_init(unsigned char bus)
|
|
{
|
|
static const char name[] = "TPS65218_PMIC";
|
|
struct pmic *p = pmic_alloc();
|
|
|
|
if (!p) {
|
|
printf("%s: POWER allocation error!\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
p->name = name;
|
|
p->interface = PMIC_I2C;
|
|
p->number_of_regs = TPS65218_PMIC_NUM_OF_REGS;
|
|
p->hw.i2c.addr = TPS65218_CHIP_PM;
|
|
p->hw.i2c.tx_num = 1;
|
|
p->bus = bus;
|
|
|
|
return 0;
|
|
}
|