u-boot/drivers/pinctrl/rockchip/pinctrl-rk3308.c
Simon Glass 9539738509 treewide: Use OF_REAL instead of !OF_PLATDATA
Now that we have a 'positive' Kconfig option, use this instead of the
negative one, which is harder to understand.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00

466 lines
9.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <dm/pinctrl.h>
#include <regmap.h>
#include <syscon.h>
#include <linux/bitops.h>
#include "pinctrl-rockchip.h"
static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
{
.num = 1,
.pin = 14,
.reg = 0x28,
.bit = 12,
.mask = 0xf
}, {
.num = 1,
.pin = 15,
.reg = 0x2c,
.bit = 0,
.mask = 0x3
}, {
.num = 1,
.pin = 18,
.reg = 0x30,
.bit = 4,
.mask = 0xf
}, {
.num = 1,
.pin = 19,
.reg = 0x30,
.bit = 8,
.mask = 0xf
}, {
.num = 1,
.pin = 20,
.reg = 0x30,
.bit = 12,
.mask = 0xf
}, {
.num = 1,
.pin = 21,
.reg = 0x34,
.bit = 0,
.mask = 0xf
}, {
.num = 1,
.pin = 22,
.reg = 0x34,
.bit = 4,
.mask = 0xf
}, {
.num = 1,
.pin = 23,
.reg = 0x34,
.bit = 8,
.mask = 0xf
}, {
.num = 3,
.pin = 12,
.reg = 0x68,
.bit = 8,
.mask = 0xf
}, {
.num = 3,
.pin = 13,
.reg = 0x68,
.bit = 12,
.mask = 0xf
}, {
.num = 2,
.pin = 2,
.reg = 0x608,
.bit = 0,
.mask = 0x7
}, {
.num = 2,
.pin = 3,
.reg = 0x608,
.bit = 4,
.mask = 0x7
}, {
.num = 2,
.pin = 16,
.reg = 0x610,
.bit = 8,
.mask = 0x7
}, {
.num = 3,
.pin = 10,
.reg = 0x610,
.bit = 0,
.mask = 0x7
}, {
.num = 3,
.pin = 11,
.reg = 0x610,
.bit = 4,
.mask = 0x7
},
};
static struct rockchip_mux_route_data rk3308_mux_route_data[] = {
{
/* rtc_clk */
.bank_num = 0,
.pin = 19,
.func = 1,
.route_offset = 0x314,
.route_val = BIT(16 + 0) | BIT(0),
}, {
/* uart2_rxm0 */
.bank_num = 1,
.pin = 22,
.func = 2,
.route_offset = 0x314,
.route_val = BIT(16 + 2) | BIT(16 + 3),
}, {
/* uart2_rxm1 */
.bank_num = 4,
.pin = 26,
.func = 2,
.route_offset = 0x314,
.route_val = BIT(16 + 2) | BIT(16 + 3) | BIT(2),
}, {
/* i2c3_sdam0 */
.bank_num = 0,
.pin = 15,
.func = 2,
.route_offset = 0x608,
.route_val = BIT(16 + 8) | BIT(16 + 9),
}, {
/* i2c3_sdam1 */
.bank_num = 3,
.pin = 12,
.func = 2,
.route_offset = 0x608,
.route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(8),
}, {
/* i2c3_sdam2 */
.bank_num = 2,
.pin = 0,
.func = 3,
.route_offset = 0x608,
.route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(9),
}, {
/* i2s-8ch-1-sclktxm0 */
.bank_num = 1,
.pin = 3,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 3),
}, {
/* i2s-8ch-1-sclkrxm0 */
.bank_num = 1,
.pin = 4,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 3),
}, {
/* i2s-8ch-1-sclktxm1 */
.bank_num = 1,
.pin = 13,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 3) | BIT(3),
}, {
/* i2s-8ch-1-sclkrxm1 */
.bank_num = 1,
.pin = 14,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 3) | BIT(3),
}, {
/* pdm-clkm0 */
.bank_num = 1,
.pin = 4,
.func = 3,
.route_offset = 0x308,
.route_val = BIT(16 + 12) | BIT(16 + 13),
}, {
/* pdm-clkm1 */
.bank_num = 1,
.pin = 14,
.func = 4,
.route_offset = 0x308,
.route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12),
}, {
/* pdm-clkm2 */
.bank_num = 2,
.pin = 6,
.func = 2,
.route_offset = 0x308,
.route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13),
}, {
/* pdm-clkm-m2 */
.bank_num = 2,
.pin = 4,
.func = 3,
.route_offset = 0x600,
.route_val = BIT(16 + 2) | BIT(2),
}, {
/* spi1_miso */
.bank_num = 3,
.pin = 10,
.func = 3,
.route_offset = 0x314,
.route_val = BIT(16 + 9),
}, {
/* spi1_miso_m1 */
.bank_num = 2,
.pin = 4,
.func = 2,
.route_offset = 0x314,
.route_val = BIT(16 + 9) | BIT(9),
}, {
/* mac_rxd0_m0 */
.bank_num = 1,
.pin = 20,
.func = 3,
.route_offset = 0x314,
.route_val = BIT(16 + 14),
}, {
/* mac_rxd0_m1 */
.bank_num = 4,
.pin = 2,
.func = 2,
.route_offset = 0x314,
.route_val = BIT(16 + 14) | BIT(14),
}, {
/* uart3_rx */
.bank_num = 3,
.pin = 12,
.func = 4,
.route_offset = 0x314,
.route_val = BIT(16 + 15),
}, {
/* uart3_rx_m1 */
.bank_num = 0,
.pin = 17,
.func = 3,
.route_offset = 0x314,
.route_val = BIT(16 + 15) | BIT(15),
},
};
static int rk3308_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
int iomux_num = (pin / 8);
struct regmap *regmap;
int reg, ret, mask, mux_type;
u8 bit;
u32 data, route_reg, route_val;
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
? priv->regmap_pmu : priv->regmap_base;
/* get basic quadrupel of mux registers and the correct reg inside */
mux_type = bank->iomux[iomux_num].type;
reg = bank->iomux[iomux_num].offset;
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
if (bank->recalced_mask & BIT(pin))
rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
if (bank->route_mask & BIT(pin)) {
if (rockchip_get_mux_route(bank, pin, mux, &route_reg,
&route_val)) {
ret = regmap_write(regmap, route_reg, route_val);
if (ret)
return ret;
}
}
data = (mask << (bit + 16));
data |= (mux & mask) << bit;
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3308_PULL_OFFSET 0xa0
static void rk3308_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3308_PULL_OFFSET;
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
}
static int rk3308_set_pull(struct rockchip_pin_bank *bank,
int pin_num, int pull)
{
struct regmap *regmap;
int reg, ret;
u8 bit, type;
u32 data;
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
return -ENOTSUPP;
rk3308_calc_pull_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
type = bank->pull_type[pin_num / 8];
ret = rockchip_translate_pull_value(type, pull);
if (ret < 0) {
debug("unsupported pull setting %d\n", pull);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
data |= (ret << bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3308_DRV_GRF_OFFSET 0x100
static void rk3308_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3308_DRV_GRF_OFFSET;
*reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE;
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG);
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
}
static int rk3308_set_drive(struct rockchip_pin_bank *bank,
int pin_num, int strength)
{
struct regmap *regmap;
int reg, ret;
u32 data;
u8 bit;
int type = bank->drv[pin_num / 8].drv_type;
rk3308_calc_drv_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
ret = rockchip_translate_drive_value(type, strength);
if (ret < 0) {
debug("unsupported driver strength %d\n", strength);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << (bit + 16);
data |= (ret << bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3308_SCHMITT_PINS_PER_REG 8
#define RK3308_SCHMITT_BANK_STRIDE 16
#define RK3308_SCHMITT_GRF_OFFSET 0x1a0
static int rk3308_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3308_SCHMITT_GRF_OFFSET;
*reg += bank->bank_num * RK3308_SCHMITT_BANK_STRIDE;
*reg += ((pin_num / RK3308_SCHMITT_PINS_PER_REG) * 4);
*bit = pin_num % RK3308_SCHMITT_PINS_PER_REG;
return 0;
}
static int rk3308_set_schmitt(struct rockchip_pin_bank *bank,
int pin_num, int enable)
{
struct regmap *regmap;
int reg;
u8 bit;
u32 data;
rk3308_calc_schmitt_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
/* enable the write to the equivalent lower bits */
data = BIT(bit + 16) | (enable << bit);
return regmap_write(regmap, reg, data);
}
static struct rockchip_pin_bank rk3308_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT,
IOMUX_8WIDTH_2BIT),
};
static struct rockchip_pin_ctrl rk3308_pin_ctrl = {
.pin_banks = rk3308_pin_banks,
.nr_banks = ARRAY_SIZE(rk3308_pin_banks),
.grf_mux_offset = 0x0,
.iomux_recalced = rk3308_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rk3308_mux_recalced_data),
.iomux_routes = rk3308_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3308_mux_route_data),
.set_mux = rk3308_set_mux,
.set_drive = rk3308_set_drive,
.set_pull = rk3308_set_pull,
.set_schmitt = rk3308_set_schmitt,
};
static const struct udevice_id rk3308_pinctrl_ids[] = {
{
.compatible = "rockchip,rk3308-pinctrl",
.data = (ulong)&rk3308_pin_ctrl
},
{ }
};
U_BOOT_DRIVER(pinctrl_rk3308) = {
.name = "rockchip_rk3308_pinctrl",
.id = UCLASS_PINCTRL,
.of_match = rk3308_pinctrl_ids,
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
.ops = &rockchip_pinctrl_ops,
#if CONFIG_IS_ENABLED(OF_REAL)
.bind = dm_scan_fdt_dev,
#endif
.probe = rockchip_pinctrl_probe,
};