u-boot/arch/x86/cpu/intel_common/cpu.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

328 lines
6.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014 Google Inc.
* Copyright (c) 2016 Google, Inc
* Copyright (C) 2015-2018 Intel Corporation.
* Copyright (C) 2018 Siemens AG
* Some code taken from coreboot cpulib.c
*/
#include <common.h>
#include <cpu.h>
#include <dm.h>
#include <errno.h>
#include <log.h>
#include <acpi/acpigen.h>
#include <asm/cpu.h>
#include <asm/cpu_common.h>
#include <asm/global_data.h>
#include <asm/intel_regs.h>
#include <asm/lapic.h>
#include <asm/lpc_common.h>
#include <asm/msr.h>
#include <asm/mtrr.h>
#include <asm/post.h>
#include <asm/microcode.h>
DECLARE_GLOBAL_DATA_PTR;
static int report_bist_failure(void)
{
if (gd->arch.bist != 0) {
post_code(POST_BIST_FAILURE);
printf("BIST failed: %08x\n", gd->arch.bist);
return -EFAULT;
}
return 0;
}
int cpu_common_init(void)
{
struct udevice *dev, *lpc;
int ret;
/* Halt if there was a built in self test failure */
ret = report_bist_failure();
if (ret)
return ret;
enable_lapic();
ret = microcode_update_intel();
if (ret && ret != -EEXIST) {
debug("%s: Microcode update failure (err=%d)\n", __func__, ret);
return ret;
}
/* Enable upper 128bytes of CMOS */
writel(1 << 2, RCB_REG(RC));
/* Early chipset init required before RAM init can work */
uclass_first_device(UCLASS_NORTHBRIDGE, &dev);
ret = uclass_first_device(UCLASS_LPC, &lpc);
if (ret)
return ret;
if (!lpc)
return -ENODEV;
/* Cause the SATA device to do its early init */
uclass_first_device(UCLASS_AHCI, &dev);
return 0;
}
int cpu_set_flex_ratio_to_tdp_nominal(void)
{
msr_t flex_ratio, msr;
u8 nominal_ratio;
/* Check for Flex Ratio support */
flex_ratio = msr_read(MSR_FLEX_RATIO);
if (!(flex_ratio.lo & FLEX_RATIO_EN))
return -EINVAL;
/* Check for >0 configurable TDPs */
msr = msr_read(MSR_PLATFORM_INFO);
if (((msr.hi >> 1) & 3) == 0)
return -EINVAL;
/* Use nominal TDP ratio for flex ratio */
msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
nominal_ratio = msr.lo & 0xff;
/* See if flex ratio is already set to nominal TDP ratio */
if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio)
return 0;
/* Set flex ratio to nominal TDP ratio */
flex_ratio.lo &= ~0xff00;
flex_ratio.lo |= nominal_ratio << 8;
flex_ratio.lo |= FLEX_RATIO_LOCK;
msr_write(MSR_FLEX_RATIO, flex_ratio);
/* Set flex ratio in soft reset data register bits 11:6 */
clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6,
(nominal_ratio & 0x3f) << 6);
debug("CPU: Soft reset to set up flex ratio\n");
/* Set soft reset control to use register value */
setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1);
/* Issue warm reset, will be "CPU only" due to soft reset data */
outb(0x0, IO_PORT_RESET);
outb(SYS_RST | RST_CPU, IO_PORT_RESET);
cpu_hlt();
/* Not reached */
return -EINVAL;
}
int cpu_intel_get_info(struct cpu_info *info, int bclk)
{
msr_t msr;
msr = msr_read(MSR_IA32_PERF_CTL);
info->cpu_freq = ((msr.lo >> 8) & 0xff) * bclk * 1000000;
info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU |
1 << CPU_FEAT_UCODE | 1 << CPU_FEAT_DEVICE_ID;
info->address_width = cpu_phys_address_size();
return 0;
}
int cpu_configure_thermal_target(struct udevice *dev)
{
u32 tcc_offset;
msr_t msr;
int ret;
ret = dev_read_u32(dev, "tcc-offset", &tcc_offset);
if (!ret)
return -ENOENT;
/* Set TCC activaiton offset if supported */
msr = msr_read(MSR_PLATFORM_INFO);
if (msr.lo & (1 << 30)) {
msr = msr_read(MSR_TEMPERATURE_TARGET);
msr.lo &= ~(0xf << 24); /* Bits 27:24 */
msr.lo |= (tcc_offset & 0xf) << 24;
msr_write(MSR_TEMPERATURE_TARGET, msr);
}
return 0;
}
void cpu_set_perf_control(uint clk_ratio)
{
msr_t perf_ctl;
perf_ctl.lo = (clk_ratio & 0xff) << 8;
perf_ctl.hi = 0;
msr_write(MSR_IA32_PERF_CTL, perf_ctl);
debug("CPU: frequency set to %d MHz\n", clk_ratio * INTEL_BCLK_MHZ);
}
bool cpu_config_tdp_levels(void)
{
msr_t platform_info;
/* Bits 34:33 indicate how many levels supported */
platform_info = msr_read(MSR_PLATFORM_INFO);
return ((platform_info.hi >> 1) & 3) != 0;
}
void cpu_set_p_state_to_turbo_ratio(void)
{
msr_t msr;
msr = msr_read(MSR_TURBO_RATIO_LIMIT);
cpu_set_perf_control(msr.lo);
}
enum burst_mode_t cpu_get_burst_mode_state(void)
{
enum burst_mode_t state;
int burst_en, burst_cap;
msr_t msr;
uint eax;
eax = cpuid_eax(0x6);
burst_cap = eax & 0x2;
msr = msr_read(MSR_IA32_MISC_ENABLE);
burst_en = !(msr.hi & BURST_MODE_DISABLE);
if (!burst_cap && burst_en)
state = BURST_MODE_UNAVAILABLE;
else if (burst_cap && !burst_en)
state = BURST_MODE_DISABLED;
else if (burst_cap && burst_en)
state = BURST_MODE_ENABLED;
else
state = BURST_MODE_UNKNOWN;
return state;
}
void cpu_set_burst_mode(bool burst_mode)
{
msr_t msr;
msr = msr_read(MSR_IA32_MISC_ENABLE);
if (burst_mode)
msr.hi &= ~BURST_MODE_DISABLE;
else
msr.hi |= BURST_MODE_DISABLE;
msr_write(MSR_IA32_MISC_ENABLE, msr);
}
void cpu_set_eist(bool eist_status)
{
msr_t msr;
msr = msr_read(MSR_IA32_MISC_ENABLE);
if (eist_status)
msr.lo |= MISC_ENABLE_ENHANCED_SPEEDSTEP;
else
msr.lo &= ~MISC_ENABLE_ENHANCED_SPEEDSTEP;
msr_write(MSR_IA32_MISC_ENABLE, msr);
}
int cpu_get_coord_type(void)
{
return HW_ALL;
}
int cpu_get_min_ratio(void)
{
msr_t msr;
/* Get bus ratio limits and calculate clock speeds */
msr = msr_read(MSR_PLATFORM_INFO);
return (msr.hi >> 8) & 0xff; /* Max Efficiency Ratio */
}
int cpu_get_max_ratio(void)
{
u32 ratio_max;
msr_t msr;
if (cpu_config_tdp_levels()) {
/* Set max ratio to nominal TDP ratio */
msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
ratio_max = msr.lo & 0xff;
} else {
msr = msr_read(MSR_PLATFORM_INFO);
/* Max Non-Turbo Ratio */
ratio_max = (msr.lo >> 8) & 0xff;
}
return ratio_max;
}
int cpu_get_bus_clock_khz(void)
{
/*
* CPU bus clock is set by default here to 100MHz. This function returns
* the bus clock in KHz.
*/
return INTEL_BCLK_MHZ * 1000;
}
int cpu_get_power_max(void)
{
int power_unit;
msr_t msr;
msr = msr_read(MSR_PKG_POWER_SKU_UNIT);
power_unit = 2 << ((msr.lo & 0xf) - 1);
msr = msr_read(MSR_PKG_POWER_SKU);
return (msr.lo & 0x7fff) * 1000 / power_unit;
}
int cpu_get_max_turbo_ratio(void)
{
msr_t msr;
msr = msr_read(MSR_TURBO_RATIO_LIMIT);
return msr.lo & 0xff;
}
int cpu_get_cores_per_package(void)
{
struct cpuid_result result;
int cores = 1;
if (gd->arch.x86_vendor != X86_VENDOR_INTEL)
return 1;
result = cpuid_ext(0xb, 1);
cores = result.ebx & 0xff;
return cores;
}
void cpu_mca_configure(void)
{
msr_t msr;
int i;
int num_banks;
msr = msr_read(MSR_IA32_MCG_CAP);
num_banks = msr.lo & 0xff;
msr.lo = 0;
msr.hi = 0;
for (i = 0; i < num_banks; i++) {
/* Clear the machine check status */
msr_write(MSR_IA32_MC0_STATUS + (i * 4), msr);
/* Initialise machine checks */
msr_write(MSR_IA32_MC0_CTL + i * 4,
(msr_t) {.lo = 0xffffffff, .hi = 0xffffffff});
}
}