u-boot/configs/imx6qdl_icore_nand_defconfig
Jagan Teki 023ff2f732 imx6: icorem6: Add NAND support
Add NAND support for Engicam i.CoreM6 qdl board.

Boot Log:
--------

U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43)
Trying to boot from NAND
NAND : 512 MiB

U-Boot 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43 +0530)

CPU:   Freescale i.MX6SOLO rev1.3 at 792MHz
CPU:   Industrial temperature grade (-40C to 105C) at 55C
Reset cause: WDOG
Model: Engicam i.CoreM6 DualLite/Solo Starter Kit
DRAM:  256 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
icorem6qdl>

Cc: Scott Wood <oss@buserror.net>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 18:59:57 +02:00

39 lines
974 B
Text

CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_TARGET_MX6Q_ICORE=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND"
CONFIG_DEFAULT_FDT_FILE="imx6dl-icore.dtb"
CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
CONFIG_SYS_PROMPT="icorem6qdl> "
CONFIG_SPL=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
CONFIG_AUTO_COMPLETE=y
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
CONFIG_OF_LIBFDT=y
CONFIG_FEC_MXC=y
CONFIG_MXC_UART=y
CONFIG_NAND_MXS=y
CONFIG_NETDEVICES=y
CONFIG_IMX_THERMAL=y
# CONFIG_BLK is not set
# CONFIG_DM_MMC_OPS is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_DMA_SUPPORT=y