u-boot/arch/sandbox/dts/sandbox.dts
Simon Glass a091a8f084 sandbox: Add a test device that uses of-platdata
Start up the test devices. These print out of-platdata contents, providing a
check that the of-platdata feature is working correctly.

The device-tree changes are made to sandbox.dts rather than test.dts. since
the former controls the of-platdata generation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00

297 lines
5.3 KiB
Text

/dts-v1/;
#define USB_CLASS_HUB 9
/ {
#address-cells = <1>;
#size-cells = <1>;
aliases {
eth5 = "/eth@90000000";
i2c0 = &i2c_0;
pci0 = &pci;
rtc0 = &rtc_0;
};
chosen {
stdout-path = "/serial";
};
cros_ec: cros-ec@0 {
reg = <0 0>;
compatible = "google,cros-ec-sandbox";
/*
* This describes the flash memory within the EC. Note
* that the STM32L flash erases to 0, not 0xff.
*/
#address-cells = <1>;
#size-cells = <1>;
flash@8000000 {
reg = <0x08000000 0x20000>;
erase-value = <0>;
#address-cells = <1>;
#size-cells = <1>;
/* Information for sandbox */
ro {
reg = <0 0xf000>;
};
wp-ro {
reg = <0xf000 0x1000>;
};
rw {
reg = <0x10000 0x10000>;
};
};
};
eth@10002000 {
compatible = "sandbox,eth";
reg = <0x10002000 0x1000>;
fake-host-hwaddr = [00 00 66 44 22 00];
};
eth@80000000 {
compatible = "sandbox,eth-raw";
reg = <0x80000000 0x1000>;
host-raw-interface = "eth0";
};
eth@90000000 {
compatible = "sandbox,eth-raw";
reg = <0x90000000 0x1000>;
host-raw-interface = "lo";
};
gpio_a: gpios@0 {
gpio-controller;
compatible = "sandbox,gpio";
#gpio-cells = <1>;
gpio-bank-name = "a";
num-gpios = <20>;
};
gpio_b: gpios@1 {
gpio-controller;
compatible = "sandbox,gpio";
#gpio-cells = <2>;
gpio-bank-name = "b";
num-gpios = <10>;
};
hexagon {
compatible = "demo-simple";
colour = "white";
sides = <6>;
};
i2c_0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0>;
compatible = "sandbox,i2c";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
eeprom@2c {
reg = <0x2c>;
compatible = "i2c-eeprom";
emul {
compatible = "sandbox,i2c-eeprom";
sandbox,filename = "i2c.bin";
sandbox,size = <128>;
};
};
rtc_0: rtc@43 {
reg = <0x43>;
compatible = "sandbox-rtc";
emul {
compatible = "sandbox,i2c-rtc";
};
};
sandbox_pmic: sandbox_pmic {
reg = <0x40>;
};
};
lcd {
u-boot,dm-pre-reloc;
compatible = "sandbox,lcd-sdl";
xres = <1366>;
yres = <768>;
};
pci: pci-controller {
compatible = "sandbox,pci";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000
0x01000000 0 0x20000000 0x20000000 0 0x2000>;
pci@1f,0 {
compatible = "pci-generic";
reg = <0xf800 0 0 0 0>;
emul@1f,0 {
compatible = "sandbox,swap-case";
};
};
};
pinctrl {
compatible = "sandbox,pinctrl";
pinctrl_i2c0: i2c0 {
groups = "i2c";
function = "i2c";
bias-pull-up;
};
pinctrl_serial0: uart0 {
groups = "serial_a";
function = "serial";
};
};
reset@1 {
compatible = "sandbox,reset";
};
spi@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0>;
compatible = "sandbox,spi";
cs-gpios = <0>, <&gpio_a 0>;
firmware_storage_spi: flash@0 {
reg = <0>;
compatible = "spansion,m25p16", "sandbox,spi-flash";
spi-max-frequency = <40000000>;
sandbox,filename = "spi.bin";
};
};
spl-test {
u-boot,dm-pre-reloc;
compatible = "sandbox,spl-test";
boolval;
intval = <1>;
intarray = <2 3 4>;
byteval = [05];
bytearray = [06];
longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11];
stringval = "message";
stringarray = "multi-word", "message";
};
spl-test2 {
u-boot,dm-pre-reloc;
compatible = "sandbox,spl-test";
intval = <3>;
intarray = <5>;
byteval = [08];
bytearray = [01 23 34];
longbytearray = [09 0a 0b 0c];
stringval = "message2";
stringarray = "another", "multi-word", "message";
};
spl-test3 {
u-boot,dm-pre-reloc;
compatible = "sandbox,spl-test";
stringarray = "one";
};
square {
compatible = "demo-shape";
colour = "blue";
sides = <4>;
};
timer {
compatible = "sandbox,timer";
clock-frequency = <1000000>;
};
tpm {
compatible = "google,sandbox-tpm";
};
triangle {
compatible = "demo-shape";
colour = "cyan";
sides = <3>;
character = <83>;
light-gpios = <&gpio_a 2>, <&gpio_b 6 0>;
};
/* Needs to be available prior to relocation */
uart0: serial {
compatible = "sandbox,serial";
sandbox,text-colour = "cyan";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial0>;
};
usb@0 {
compatible = "sandbox,usb";
status = "disabled";
hub {
compatible = "sandbox,usb-hub";
#address-cells = <1>;
#size-cells = <0>;
flash-stick {
reg = <0>;
compatible = "sandbox,usb-flash";
};
};
};
usb@1 {
compatible = "sandbox,usb";
hub {
compatible = "usb-hub";
usb,device-class = <USB_CLASS_HUB>;
hub-emul {
compatible = "sandbox,usb-hub";
#address-cells = <1>;
#size-cells = <0>;
flash-stick {
reg = <0>;
compatible = "sandbox,usb-flash";
sandbox,filepath = "flash.bin";
};
};
};
};
usb@2 {
compatible = "sandbox,usb";
status = "disabled";
};
spmi: spmi@0 {
compatible = "sandbox,spmi";
#address-cells = <0x1>;
#size-cells = <0x1>;
pm8916@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
spmi_gpios: gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000 0x400>;
gpio-controller;
gpio-count = <4>;
#gpio-cells = <2>;
gpio-bank-name="spmi";
};
};
};
};
#include "cros-ec-keyboard.dtsi"
#include "sandbox_pmic.dtsi"