Heiko Schocher 17fa032671 serial, ns16550: bugfix: ns16550 fifo not enabled ... commit: 65f83802b7 "serial: 16550: Add getfcr accessor" breaks u-boot commandline working with long commands sending to the board. Since the above patch, you have to setup the fcr register. For board/archs which enable OF_PLATDATA, the new field fcr in struct ns16550_platdata is not filled with a default value ... This leads in not setting up the uarts fifo, which ends in problems, when you send long commands to u-boots commandline. Detected this issue with automated tbot tests on am335x based shc board. The error does not popup, if you type commands. You need to copy&paste a long command to u-boots commandshell (or send a long command with tbot) Possible boards/plattforms with problems: ./arch/arm/cpu/arm926ejs/lpc32xx/devices.c ./arch/arm/mach-tegra/board.c ./board/overo/overo.c ./board/quipos/cairo/cairo.c ./board/logicpd/omap3som/omap3logic.c ./board/logicpd/zoom1/zoom1.c ./board/timll/devkit8000/devkit8000.c ./board/lg/sniper/sniper.c ./board/ti/beagle/beagle.c ./drivers/serial/serial_rockchip.c Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>		2017-01-20 09:15:19 -05:00
..
Kconfig	sniper: Change vendor name from lge to lg, matching devicetree vendor prefix	2016-04-01 17:18:06 -04:00
MAINTAINERS	sniper: Change vendor name from lge to lg, matching devicetree vendor prefix	2016-04-01 17:18:06 -04:00
Makefile	sniper: Change vendor name from lge to lg, matching devicetree vendor prefix	2016-04-01 17:18:06 -04:00
sniper.c	serial, ns16550: bugfix: ns16550 fifo not enabled	2017-01-20 09:15:19 -05:00
sniper.h	sniper: Change vendor name from lge to lg, matching devicetree vendor prefix	2016-04-01 17:18:06 -04:00