mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 16:07:30 +00:00
c4e8862308
Switch spi_flash_* interfaces to call into new SPI NOR framework via MTD layer. Fix up sf_dataflash to work in legacy way. And update sandbox to use new interfaces/definitions Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
607 lines
15 KiB
C
607 lines
15 KiB
C
/*
|
|
* Simulate a SPI flash
|
|
*
|
|
* Copyright (c) 2011-2013 The Chromium OS Authors.
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#define LOG_CATEGORY UCLASS_SPI_FLASH
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <os.h>
|
|
|
|
#include <spi_flash.h>
|
|
#include "sf_internal.h"
|
|
|
|
#include <asm/getopt.h>
|
|
#include <asm/spi.h>
|
|
#include <asm/state.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <dm/uclass-internal.h>
|
|
|
|
/*
|
|
* The different states that our SPI flash transitions between.
|
|
* We need to keep track of this across multiple xfer calls since
|
|
* the SPI bus could possibly call down into us multiple times.
|
|
*/
|
|
enum sandbox_sf_state {
|
|
SF_CMD, /* default state -- we're awaiting a command */
|
|
SF_ID, /* read the flash's (jedec) ID code */
|
|
SF_ADDR, /* processing the offset in the flash to read/etc... */
|
|
SF_READ, /* reading data from the flash */
|
|
SF_WRITE, /* writing data to the flash, i.e. page programming */
|
|
SF_ERASE, /* erase the flash */
|
|
SF_READ_STATUS, /* read the flash's status register */
|
|
SF_READ_STATUS1, /* read the flash's status register upper 8 bits*/
|
|
SF_WRITE_STATUS, /* write the flash's status register */
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(LOG)
|
|
static const char *sandbox_sf_state_name(enum sandbox_sf_state state)
|
|
{
|
|
static const char * const states[] = {
|
|
"CMD", "ID", "ADDR", "READ", "WRITE", "ERASE", "READ_STATUS",
|
|
"READ_STATUS1", "WRITE_STATUS",
|
|
};
|
|
return states[state];
|
|
}
|
|
#endif /* LOG */
|
|
|
|
/* Bits for the status register */
|
|
#define STAT_WIP (1 << 0)
|
|
#define STAT_WEL (1 << 1)
|
|
#define STAT_BP_SHIFT 2
|
|
#define STAT_BP_MASK (7 << STAT_BP_SHIFT)
|
|
|
|
/* Assume all SPI flashes have 3 byte addresses since they do atm */
|
|
#define SF_ADDR_LEN 3
|
|
|
|
#define IDCODE_LEN 3
|
|
|
|
/* Used to quickly bulk erase backing store */
|
|
static u8 sandbox_sf_0xff[0x1000];
|
|
|
|
/* Internal state data for each SPI flash */
|
|
struct sandbox_spi_flash {
|
|
unsigned int cs; /* Chip select we are attached to */
|
|
/*
|
|
* As we receive data over the SPI bus, our flash transitions
|
|
* between states. For example, we start off in the SF_CMD
|
|
* state where the first byte tells us what operation to perform
|
|
* (such as read or write the flash). But the operation itself
|
|
* can go through a few states such as first reading in the
|
|
* offset in the flash to perform the requested operation.
|
|
* Thus "state" stores the exact state that our machine is in
|
|
* while "cmd" stores the overall command we're processing.
|
|
*/
|
|
enum sandbox_sf_state state;
|
|
uint cmd;
|
|
/* Erase size of current erase command */
|
|
uint erase_size;
|
|
/* Current position in the flash; used when reading/writing/etc... */
|
|
uint off;
|
|
/* How many address bytes we've consumed */
|
|
uint addr_bytes, pad_addr_bytes;
|
|
/* The current flash status (see STAT_XXX defines above) */
|
|
u16 status;
|
|
/* Data describing the flash we're emulating */
|
|
const struct flash_info *data;
|
|
/* The file on disk to serv up data from */
|
|
int fd;
|
|
};
|
|
|
|
struct sandbox_spi_flash_plat_data {
|
|
const char *filename;
|
|
const char *device_name;
|
|
int bus;
|
|
int cs;
|
|
};
|
|
|
|
void sandbox_sf_set_block_protect(struct udevice *dev, int bp_mask)
|
|
{
|
|
struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
|
|
|
|
sbsf->status &= ~STAT_BP_MASK;
|
|
sbsf->status |= bp_mask << STAT_BP_SHIFT;
|
|
}
|
|
|
|
/**
|
|
* This is a very strange probe function. If it has platform data (which may
|
|
* have come from the device tree) then this function gets the filename and
|
|
* device type from there.
|
|
*/
|
|
static int sandbox_sf_probe(struct udevice *dev)
|
|
{
|
|
/* spec = idcode:file */
|
|
struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
|
|
size_t len, idname_len;
|
|
const struct flash_info *data;
|
|
struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
|
|
struct sandbox_state *state = state_get_current();
|
|
struct dm_spi_slave_platdata *slave_plat;
|
|
struct udevice *bus = dev->parent;
|
|
const char *spec = NULL;
|
|
struct udevice *emul;
|
|
int ret = 0;
|
|
int cs = -1;
|
|
|
|
debug("%s: bus %d, looking for emul=%p: ", __func__, bus->seq, dev);
|
|
ret = sandbox_spi_get_emul(state, bus, dev, &emul);
|
|
if (ret) {
|
|
printf("Error: Unknown chip select for device '%s'\n",
|
|
dev->name);
|
|
return ret;
|
|
}
|
|
slave_plat = dev_get_parent_platdata(dev);
|
|
cs = slave_plat->cs;
|
|
debug("found at cs %d\n", cs);
|
|
|
|
if (!pdata->filename) {
|
|
printf("Error: No filename available\n");
|
|
return -EINVAL;
|
|
}
|
|
spec = strchr(pdata->device_name, ',');
|
|
if (spec)
|
|
spec++;
|
|
else
|
|
spec = pdata->device_name;
|
|
idname_len = strlen(spec);
|
|
debug("%s: device='%s'\n", __func__, spec);
|
|
|
|
for (data = spi_nor_ids; data->name; data++) {
|
|
len = strlen(data->name);
|
|
if (idname_len != len)
|
|
continue;
|
|
if (!strncasecmp(spec, data->name, len))
|
|
break;
|
|
}
|
|
if (!data->name) {
|
|
printf("%s: unknown flash '%*s'\n", __func__, (int)idname_len,
|
|
spec);
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
if (sandbox_sf_0xff[0] == 0x00)
|
|
memset(sandbox_sf_0xff, 0xff, sizeof(sandbox_sf_0xff));
|
|
|
|
sbsf->fd = os_open(pdata->filename, 02);
|
|
if (sbsf->fd == -1) {
|
|
printf("%s: unable to open file '%s'\n", __func__,
|
|
pdata->filename);
|
|
ret = -EIO;
|
|
goto error;
|
|
}
|
|
|
|
sbsf->data = data;
|
|
sbsf->cs = cs;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
debug("%s: Got error %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int sandbox_sf_remove(struct udevice *dev)
|
|
{
|
|
struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
|
|
|
|
os_close(sbsf->fd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sandbox_sf_cs_activate(struct udevice *dev)
|
|
{
|
|
struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
|
|
|
|
log_content("sandbox_sf: CS activated; state is fresh!\n");
|
|
|
|
/* CS is asserted, so reset state */
|
|
sbsf->off = 0;
|
|
sbsf->addr_bytes = 0;
|
|
sbsf->pad_addr_bytes = 0;
|
|
sbsf->state = SF_CMD;
|
|
sbsf->cmd = SF_CMD;
|
|
}
|
|
|
|
static void sandbox_sf_cs_deactivate(struct udevice *dev)
|
|
{
|
|
log_content("sandbox_sf: CS deactivated; cmd done processing!\n");
|
|
}
|
|
|
|
/*
|
|
* There are times when the data lines are allowed to tristate. What
|
|
* is actually sensed on the line depends on the hardware. It could
|
|
* always be 0xFF/0x00 (if there are pull ups/downs), or things could
|
|
* float and so we'd get garbage back. This func encapsulates that
|
|
* scenario so we can worry about the details here.
|
|
*/
|
|
static void sandbox_spi_tristate(u8 *buf, uint len)
|
|
{
|
|
/* XXX: make this into a user config option ? */
|
|
memset(buf, 0xff, len);
|
|
}
|
|
|
|
/* Figure out what command this stream is telling us to do */
|
|
static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx,
|
|
u8 *tx)
|
|
{
|
|
enum sandbox_sf_state oldstate = sbsf->state;
|
|
|
|
/* We need to output a byte for the cmd byte we just ate */
|
|
if (tx)
|
|
sandbox_spi_tristate(tx, 1);
|
|
|
|
sbsf->cmd = rx[0];
|
|
switch (sbsf->cmd) {
|
|
case SPINOR_OP_RDID:
|
|
sbsf->state = SF_ID;
|
|
sbsf->cmd = SF_ID;
|
|
break;
|
|
case SPINOR_OP_READ_FAST:
|
|
sbsf->pad_addr_bytes = 1;
|
|
case SPINOR_OP_READ:
|
|
case SPINOR_OP_PP:
|
|
sbsf->state = SF_ADDR;
|
|
break;
|
|
case SPINOR_OP_WRDI:
|
|
debug(" write disabled\n");
|
|
sbsf->status &= ~STAT_WEL;
|
|
break;
|
|
case SPINOR_OP_RDSR:
|
|
sbsf->state = SF_READ_STATUS;
|
|
break;
|
|
case SPINOR_OP_RDSR2:
|
|
sbsf->state = SF_READ_STATUS1;
|
|
break;
|
|
case SPINOR_OP_WREN:
|
|
debug(" write enabled\n");
|
|
sbsf->status |= STAT_WEL;
|
|
break;
|
|
case SPINOR_OP_WRSR:
|
|
sbsf->state = SF_WRITE_STATUS;
|
|
break;
|
|
default: {
|
|
int flags = sbsf->data->flags;
|
|
|
|
/* we only support erase here */
|
|
if (sbsf->cmd == SPINOR_OP_CHIP_ERASE) {
|
|
sbsf->erase_size = sbsf->data->sector_size *
|
|
sbsf->data->n_sectors;
|
|
} else if (sbsf->cmd == SPINOR_OP_BE_4K && (flags & SECT_4K)) {
|
|
sbsf->erase_size = 4 << 10;
|
|
} else if (sbsf->cmd == SPINOR_OP_SE && !(flags & SECT_4K)) {
|
|
sbsf->erase_size = 64 << 10;
|
|
} else {
|
|
debug(" cmd unknown: %#x\n", sbsf->cmd);
|
|
return -EIO;
|
|
}
|
|
sbsf->state = SF_ADDR;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (oldstate != sbsf->state)
|
|
log_content(" cmd: transition to %s state\n",
|
|
sandbox_sf_state_name(sbsf->state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sandbox_erase_part(struct sandbox_spi_flash *sbsf, int size)
|
|
{
|
|
int todo;
|
|
int ret;
|
|
|
|
while (size > 0) {
|
|
todo = min(size, (int)sizeof(sandbox_sf_0xff));
|
|
ret = os_write(sbsf->fd, sandbox_sf_0xff, todo);
|
|
if (ret != todo)
|
|
return ret;
|
|
size -= todo;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sandbox_sf_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *rxp, void *txp, unsigned long flags)
|
|
{
|
|
struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
|
|
const uint8_t *rx = rxp;
|
|
uint8_t *tx = txp;
|
|
uint cnt, pos = 0;
|
|
int bytes = bitlen / 8;
|
|
int ret;
|
|
|
|
log_content("sandbox_sf: state:%x(%s) bytes:%u\n", sbsf->state,
|
|
sandbox_sf_state_name(sbsf->state), bytes);
|
|
|
|
if ((flags & SPI_XFER_BEGIN))
|
|
sandbox_sf_cs_activate(dev);
|
|
|
|
if (sbsf->state == SF_CMD) {
|
|
/* Figure out the initial state */
|
|
ret = sandbox_sf_process_cmd(sbsf, rx, tx);
|
|
if (ret)
|
|
return ret;
|
|
++pos;
|
|
}
|
|
|
|
/* Process the remaining data */
|
|
while (pos < bytes) {
|
|
switch (sbsf->state) {
|
|
case SF_ID: {
|
|
u8 id;
|
|
|
|
log_content(" id: off:%u tx:", sbsf->off);
|
|
if (sbsf->off < IDCODE_LEN) {
|
|
/* Extract correct byte from ID 0x00aabbcc */
|
|
id = ((JEDEC_MFR(sbsf->data) << 16) |
|
|
JEDEC_ID(sbsf->data)) >>
|
|
(8 * (IDCODE_LEN - 1 - sbsf->off));
|
|
} else {
|
|
id = 0;
|
|
}
|
|
log_content("%d %02x\n", sbsf->off, id);
|
|
tx[pos++] = id;
|
|
++sbsf->off;
|
|
break;
|
|
}
|
|
case SF_ADDR:
|
|
log_content(" addr: bytes:%u rx:%02x ",
|
|
sbsf->addr_bytes, rx[pos]);
|
|
|
|
if (sbsf->addr_bytes++ < SF_ADDR_LEN)
|
|
sbsf->off = (sbsf->off << 8) | rx[pos];
|
|
log_content("addr:%06x\n", sbsf->off);
|
|
|
|
if (tx)
|
|
sandbox_spi_tristate(&tx[pos], 1);
|
|
pos++;
|
|
|
|
/* See if we're done processing */
|
|
if (sbsf->addr_bytes <
|
|
SF_ADDR_LEN + sbsf->pad_addr_bytes)
|
|
break;
|
|
|
|
/* Next state! */
|
|
if (os_lseek(sbsf->fd, sbsf->off, OS_SEEK_SET) < 0) {
|
|
puts("sandbox_sf: os_lseek() failed");
|
|
return -EIO;
|
|
}
|
|
switch (sbsf->cmd) {
|
|
case SPINOR_OP_READ_FAST:
|
|
case SPINOR_OP_READ:
|
|
sbsf->state = SF_READ;
|
|
break;
|
|
case SPINOR_OP_PP:
|
|
sbsf->state = SF_WRITE;
|
|
break;
|
|
default:
|
|
/* assume erase state ... */
|
|
sbsf->state = SF_ERASE;
|
|
goto case_sf_erase;
|
|
}
|
|
log_content(" cmd: transition to %s state\n",
|
|
sandbox_sf_state_name(sbsf->state));
|
|
break;
|
|
case SF_READ:
|
|
/*
|
|
* XXX: need to handle exotic behavior:
|
|
* - reading past end of device
|
|
*/
|
|
|
|
cnt = bytes - pos;
|
|
log_content(" tx: read(%u)\n", cnt);
|
|
assert(tx);
|
|
ret = os_read(sbsf->fd, tx + pos, cnt);
|
|
if (ret < 0) {
|
|
puts("sandbox_sf: os_read() failed\n");
|
|
return -EIO;
|
|
}
|
|
pos += ret;
|
|
break;
|
|
case SF_READ_STATUS:
|
|
log_content(" read status: %#x\n", sbsf->status);
|
|
cnt = bytes - pos;
|
|
memset(tx + pos, sbsf->status, cnt);
|
|
pos += cnt;
|
|
break;
|
|
case SF_READ_STATUS1:
|
|
log_content(" read status: %#x\n", sbsf->status);
|
|
cnt = bytes - pos;
|
|
memset(tx + pos, sbsf->status >> 8, cnt);
|
|
pos += cnt;
|
|
break;
|
|
case SF_WRITE_STATUS:
|
|
log_content(" write status: %#x (ignored)\n", rx[pos]);
|
|
pos = bytes;
|
|
break;
|
|
case SF_WRITE:
|
|
/*
|
|
* XXX: need to handle exotic behavior:
|
|
* - unaligned addresses
|
|
* - more than a page (256) worth of data
|
|
* - reading past end of device
|
|
*/
|
|
if (!(sbsf->status & STAT_WEL)) {
|
|
puts("sandbox_sf: write enable not set before write\n");
|
|
goto done;
|
|
}
|
|
|
|
cnt = bytes - pos;
|
|
log_content(" rx: write(%u)\n", cnt);
|
|
if (tx)
|
|
sandbox_spi_tristate(&tx[pos], cnt);
|
|
ret = os_write(sbsf->fd, rx + pos, cnt);
|
|
if (ret < 0) {
|
|
puts("sandbox_spi: os_write() failed\n");
|
|
return -EIO;
|
|
}
|
|
pos += ret;
|
|
sbsf->status &= ~STAT_WEL;
|
|
break;
|
|
case SF_ERASE:
|
|
case_sf_erase: {
|
|
if (!(sbsf->status & STAT_WEL)) {
|
|
puts("sandbox_sf: write enable not set before erase\n");
|
|
goto done;
|
|
}
|
|
|
|
/* verify address is aligned */
|
|
if (sbsf->off & (sbsf->erase_size - 1)) {
|
|
log_content(" sector erase: cmd:%#x needs align:%#x, but we got %#x\n",
|
|
sbsf->cmd, sbsf->erase_size,
|
|
sbsf->off);
|
|
sbsf->status &= ~STAT_WEL;
|
|
goto done;
|
|
}
|
|
|
|
log_content(" sector erase addr: %u, size: %u\n",
|
|
sbsf->off, sbsf->erase_size);
|
|
|
|
cnt = bytes - pos;
|
|
if (tx)
|
|
sandbox_spi_tristate(&tx[pos], cnt);
|
|
pos += cnt;
|
|
|
|
/*
|
|
* TODO(vapier@gentoo.org): latch WIP in status, and
|
|
* delay before clearing it ?
|
|
*/
|
|
ret = sandbox_erase_part(sbsf, sbsf->erase_size);
|
|
sbsf->status &= ~STAT_WEL;
|
|
if (ret) {
|
|
log_content("sandbox_sf: Erase failed\n");
|
|
goto done;
|
|
}
|
|
goto done;
|
|
}
|
|
default:
|
|
log_content(" ??? no idea what to do ???\n");
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
done:
|
|
if (flags & SPI_XFER_END)
|
|
sandbox_sf_cs_deactivate(dev);
|
|
return pos == bytes ? 0 : -EIO;
|
|
}
|
|
|
|
int sandbox_sf_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
|
|
|
|
pdata->filename = dev_read_string(dev, "sandbox,filename");
|
|
pdata->device_name = dev_read_string(dev, "compatible");
|
|
if (!pdata->filename || !pdata->device_name) {
|
|
debug("%s: Missing properties, filename=%s, device_name=%s\n",
|
|
__func__, pdata->filename, pdata->device_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_emul_ops sandbox_sf_emul_ops = {
|
|
.xfer = sandbox_sf_xfer,
|
|
};
|
|
|
|
#ifdef CONFIG_SPI_FLASH
|
|
int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
|
|
struct udevice *bus, ofnode node, const char *spec)
|
|
{
|
|
struct udevice *emul;
|
|
char name[20], *str;
|
|
struct driver *drv;
|
|
int ret;
|
|
|
|
/* now the emulator */
|
|
strncpy(name, spec, sizeof(name) - 6);
|
|
name[sizeof(name) - 6] = '\0';
|
|
strcat(name, "-emul");
|
|
drv = lists_driver_lookup_name("sandbox_sf_emul");
|
|
if (!drv) {
|
|
puts("Cannot find sandbox_sf_emul driver\n");
|
|
return -ENOENT;
|
|
}
|
|
str = strdup(name);
|
|
if (!str)
|
|
return -ENOMEM;
|
|
ret = device_bind_ofnode(bus, drv, str, NULL, node, &emul);
|
|
if (ret) {
|
|
free(str);
|
|
printf("Cannot create emul device for spec '%s' (err=%d)\n",
|
|
spec, ret);
|
|
return ret;
|
|
}
|
|
state->spi[busnum][cs].emul = emul;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs)
|
|
{
|
|
struct udevice *dev;
|
|
|
|
dev = state->spi[busnum][cs].emul;
|
|
device_remove(dev, DM_REMOVE_NORMAL);
|
|
device_unbind(dev);
|
|
state->spi[busnum][cs].emul = NULL;
|
|
}
|
|
|
|
int sandbox_spi_get_emul(struct sandbox_state *state,
|
|
struct udevice *bus, struct udevice *slave,
|
|
struct udevice **emulp)
|
|
{
|
|
struct sandbox_spi_info *info;
|
|
int busnum = bus->seq;
|
|
int cs = spi_chip_select(slave);
|
|
int ret;
|
|
|
|
info = &state->spi[busnum][cs];
|
|
if (!info->emul) {
|
|
/* Use the same device tree node as the SPI flash device */
|
|
debug("%s: busnum=%u, cs=%u: binding SPI flash emulation: ",
|
|
__func__, busnum, cs);
|
|
ret = sandbox_sf_bind_emul(state, busnum, cs, bus,
|
|
dev_ofnode(slave), slave->name);
|
|
if (ret) {
|
|
debug("failed (err=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
debug("OK\n");
|
|
}
|
|
*emulp = info->emul;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct udevice_id sandbox_sf_ids[] = {
|
|
{ .compatible = "sandbox,spi-flash" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sandbox_sf_emul) = {
|
|
.name = "sandbox_sf_emul",
|
|
.id = UCLASS_SPI_EMUL,
|
|
.of_match = sandbox_sf_ids,
|
|
.ofdata_to_platdata = sandbox_sf_ofdata_to_platdata,
|
|
.probe = sandbox_sf_probe,
|
|
.remove = sandbox_sf_remove,
|
|
.priv_auto_alloc_size = sizeof(struct sandbox_spi_flash),
|
|
.platdata_auto_alloc_size = sizeof(struct sandbox_spi_flash_plat_data),
|
|
.ops = &sandbox_sf_emul_ops,
|
|
};
|