mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
5d2901a4b6
Alignment with kernel patch proposal for binding: [PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c https://lkml.org/lkml/2019/5/14/159 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
379 lines
7.4 KiB
Text
379 lines
7.4 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
|
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "stm32mp157c.dtsi"
|
|
#include "stm32mp157xac-pinctrl.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/mfd/st,stpmic1.h>
|
|
|
|
/ {
|
|
model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
|
|
compatible = "st,stm32mp157a-dk1", "st,stm32mp157";
|
|
|
|
aliases {
|
|
ethernet0 = ðernet0;
|
|
serial0 = &uart4;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@c0000000 {
|
|
reg = <0xc0000000 0x20000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpu_reserved: gpu@d4000000 {
|
|
reg = <0xd4000000 0x4000000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
led {
|
|
compatible = "gpio-leds";
|
|
blue {
|
|
label = "heartbeat";
|
|
gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
};
|
|
|
|
&cec {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&cec_pins_b>;
|
|
pinctrl-1 = <&cec_pins_sleep_b>;
|
|
status = "okay";
|
|
};
|
|
|
|
ðernet0 {
|
|
status = "okay";
|
|
pinctrl-0 = <ðernet0_rgmii_pins_a>;
|
|
pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
|
|
pinctrl-names = "default", "sleep";
|
|
phy-mode = "rgmii-id";
|
|
max-speed = <1000>;
|
|
phy-handle = <&phy0>;
|
|
|
|
mdio0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dwmac-mdio";
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpu {
|
|
contiguous-area = <&gpu_reserved>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&i2c1_pins_a>;
|
|
pinctrl-1 = <&i2c1_pins_sleep_a>;
|
|
i2c-scl-rising-time-ns = <100>;
|
|
i2c-scl-falling-time-ns = <7>;
|
|
status = "okay";
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
|
|
hdmi-transmitter@39 {
|
|
compatible = "sil,sii9022";
|
|
reg = <0x39>;
|
|
iovcc-supply = <&v3v3_hdmi>;
|
|
cvcc12-supply = <&v1v2_hdmi>;
|
|
reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
|
|
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-parent = <&gpiog>;
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <<dc_pins_a>;
|
|
pinctrl-1 = <<dc_pins_sleep_a>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
sii9022_in: endpoint {
|
|
remote-endpoint = <<dc_ep0_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
|
|
typec: stusb1600@28 {
|
|
compatible = "st,stusb1600";
|
|
reg = <0x28>;
|
|
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-parent = <&gpioi>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&stusb1600_pins_a>;
|
|
|
|
status = "okay";
|
|
|
|
typec_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
power-role = "sink";
|
|
power-opmode = "default";
|
|
};
|
|
};
|
|
|
|
pmic: stpmic@33 {
|
|
compatible = "st,stpmic1";
|
|
reg = <0x33>;
|
|
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
status = "okay";
|
|
|
|
regulators {
|
|
compatible = "st,stpmic1-regulators";
|
|
ldo1-supply = <&v3v3>;
|
|
ldo3-supply = <&vdd_ddr>;
|
|
ldo6-supply = <&v3v3>;
|
|
pwr_sw1-supply = <&bst_out>;
|
|
pwr_sw2-supply = <&bst_out>;
|
|
|
|
vddcore: buck1 {
|
|
regulator-name = "vddcore";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd_ddr: buck2 {
|
|
regulator-name = "vdd_ddr";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd: buck3 {
|
|
regulator-name = "vdd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
st,mask-reset;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
v3v3: buck4 {
|
|
regulator-name = "v3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
regulator-initial-mode = <0>;
|
|
};
|
|
|
|
v1v8_audio: ldo1 {
|
|
regulator-name = "v1v8_audio";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
interrupts = <IT_CURLIM_LDO1 0>;
|
|
};
|
|
|
|
v3v3_hdmi: ldo2 {
|
|
regulator-name = "v3v3_hdmi";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
interrupts = <IT_CURLIM_LDO2 0>;
|
|
};
|
|
|
|
vtt_ddr: ldo3 {
|
|
regulator-name = "vtt_ddr";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd_usb: ldo4 {
|
|
regulator-name = "vdd_usb";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
interrupts = <IT_CURLIM_LDO4 0>;
|
|
};
|
|
|
|
vdda: ldo5 {
|
|
regulator-name = "vdda";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO5 0>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
v1v2_hdmi: ldo6 {
|
|
regulator-name = "v1v2_hdmi";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
interrupts = <IT_CURLIM_LDO6 0>;
|
|
};
|
|
|
|
vref_ddr: vref_ddr {
|
|
regulator-name = "vref_ddr";
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
bst_out: boost {
|
|
regulator-name = "bst_out";
|
|
interrupts = <IT_OCP_BOOST 0>;
|
|
};
|
|
|
|
vbus_otg: pwr_sw1 {
|
|
regulator-name = "vbus_otg";
|
|
interrupts = <IT_OCP_OTG 0>;
|
|
};
|
|
|
|
vbus_sw: pwr_sw2 {
|
|
regulator-name = "vbus_sw";
|
|
interrupts = <IT_OCP_SWOUT 0>;
|
|
regulator-active-discharge;
|
|
};
|
|
};
|
|
|
|
onkey {
|
|
compatible = "st,stpmic1-onkey";
|
|
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
|
|
interrupt-names = "onkey-falling", "onkey-rising";
|
|
power-off-time-sec = <10>;
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog {
|
|
compatible = "st,stpmic1-wdt";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&ipcc {
|
|
status = "okay";
|
|
};
|
|
|
|
&iwdg2 {
|
|
timeout-sec = <32>;
|
|
status = "okay";
|
|
};
|
|
|
|
<dc {
|
|
status = "okay";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ltdc_ep0_out: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&sii9022_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&m4_rproc {
|
|
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
|
|
mbox-names = "vq0", "vq1", "shutdown";
|
|
status = "okay";
|
|
};
|
|
|
|
&pwr {
|
|
pwr-regulators {
|
|
vdd-supply = <&vdd>;
|
|
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
|
};
|
|
};
|
|
|
|
&rng1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc1 {
|
|
pinctrl-names = "default", "opendrain", "sleep";
|
|
pinctrl-0 = <&sdmmc1_b4_pins_a>;
|
|
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
|
|
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
|
broken-cd;
|
|
st,neg-edge;
|
|
bus-width = <4>;
|
|
vmmc-supply = <&v3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh_ehci {
|
|
phys = <&usbphyc_port0>;
|
|
phy-names = "usb";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
dr_mode = "peripheral";
|
|
phys = <&usbphyc_port1 0>;
|
|
phy-names = "usb2-phy";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc_port0 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&usbphyc_port1 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&vrefbuf {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
vdda-supply = <&vdd>;
|
|
status = "okay";
|
|
};
|