mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
54a08c4139
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git
up to the commit "mv_ddr: a3700: Use the right size for memset to not overflow"
d5acc10c287e40cc2feeb28710b92e45c93c702c
This patch was created by following steps:
1. Replace all a38x files in U-Boot tree by files from upstream github
Marvell mv-ddr-marvell repository.
2. Run following command to omit portions not relevant for a38x, ddr3, and ddr4:
files=drivers/ddr/marvell/a38x/*
unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_APN806 \
-UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \
-UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \
-UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DCONFIG_ARMADA_38X -UCONFIG_ARMADA_39X \
-UCONFIG_64BIT $files
3. Manually change license to SPDX-License-Identifier
(upstream license in upstream github repository contains long license
texts and U-Boot is using just SPDX-License-Identifier.
After applying this patch, a38x, ddr3, and ddr4 code in upstream Marvell github
repository and in U-Boot would be fully identical. So in future applying
above steps could be used to sync code again.
The only change in this patch are:
1. Some fixes with include files.
2. Some function return and basic type defines changes in
mv_ddr_plat.c (to correct Marvell bug).
3. Remove of dead code in newly copied files (as a result of the
filter script stripping out everything other than a38x, dd3, and ddr4).
Reference:
"ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository"
107c3391b9
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
129 lines
4.7 KiB
C
129 lines
4.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*/
|
|
|
|
#ifndef _DDR3_TRAINING_IP_FLOW_H_
|
|
#define _DDR3_TRAINING_IP_FLOW_H_
|
|
|
|
#include "ddr3_training_ip.h"
|
|
#include "ddr3_training_ip_db.h"
|
|
#include "mv_ddr_plat.h"
|
|
|
|
#define KILLER_PATTERN_LENGTH 32
|
|
#define EXT_ACCESS_BURST_LENGTH 8
|
|
|
|
#define ECC_READ_BUS_0 0
|
|
#define ECC_PHY_ACCESS_3 3
|
|
#define ECC_PHY_ACCESS_4 4
|
|
#define ECC_PHY_ACCESS_8 8
|
|
#define BUS_WIDTH_IN_BITS 8
|
|
#define MAX_POLLING_ITERATIONS 1000000
|
|
#define ADLL_LENGTH 32
|
|
|
|
#define GP_RSVD0_REG 0x182e0
|
|
|
|
/*
|
|
* DFX address Space
|
|
* Table 2: DFX address space
|
|
* Address Bits Value Description
|
|
* [31 : 20] 0x? DFX base address bases PCIe mapping
|
|
* [19 : 15] 0...Number_of_client-1 Client Index inside pipe.
|
|
* See also Table 1 Multi_cast = 29 Broadcast = 28
|
|
* [14 : 13] 2'b01 Access to Client Internal Register
|
|
* [12 : 0] Client Internal Register offset See related Client Registers
|
|
* [14 : 13] 2'b00 Access to Ram Wrappers Internal Register
|
|
* [12 : 6] 0 Number_of_rams-1 Ram Index inside Client
|
|
* [5 : 0] Ram Wrapper Internal Register offset See related Ram Wrappers
|
|
* Registers
|
|
*/
|
|
|
|
/* nsec */
|
|
#define AUTO_ZQC_TIMING 15384
|
|
|
|
enum mr_number {
|
|
MR_CMD0,
|
|
MR_CMD1,
|
|
MR_CMD2,
|
|
MR_CMD3,
|
|
#if defined(CONFIG_DDR4)
|
|
MR_CMD4,
|
|
MR_CMD5,
|
|
MR_CMD6,
|
|
#endif
|
|
MR_LAST
|
|
};
|
|
|
|
struct mv_ddr_mr_data {
|
|
u32 cmd;
|
|
u32 reg_addr;
|
|
};
|
|
|
|
struct write_supp_result {
|
|
enum hws_wl_supp stage;
|
|
int is_pup_fail;
|
|
};
|
|
|
|
int ddr3_tip_write_leveling_static_config(u32 dev_num, u32 if_id,
|
|
enum mv_ddr_freq frequency,
|
|
u32 *round_trip_delay_arr);
|
|
int ddr3_tip_read_leveling_static_config(u32 dev_num, u32 if_id,
|
|
enum mv_ddr_freq frequency,
|
|
u32 *total_round_trip_delay_arr);
|
|
int ddr3_tip_if_write(u32 dev_num, enum hws_access_type interface_access,
|
|
u32 if_id, u32 reg_addr, u32 data_value, u32 mask);
|
|
int ddr3_tip_if_polling(u32 dev_num, enum hws_access_type access_type,
|
|
u32 if_id, u32 exp_value, u32 mask, u32 offset,
|
|
u32 poll_tries);
|
|
int ddr3_tip_if_read(u32 dev_num, enum hws_access_type interface_access,
|
|
u32 if_id, u32 reg_addr, u32 *data, u32 mask);
|
|
int ddr3_tip_bus_read_modify_write(u32 dev_num,
|
|
enum hws_access_type access_type,
|
|
u32 if_id, u32 phy_id,
|
|
enum hws_ddr_phy phy_type,
|
|
u32 reg_addr, u32 data_value, u32 reg_mask);
|
|
int ddr3_tip_bus_read(u32 dev_num, u32 if_id, enum hws_access_type phy_access,
|
|
u32 phy_id, enum hws_ddr_phy phy_type, u32 reg_addr,
|
|
u32 *data);
|
|
int ddr3_tip_bus_write(u32 dev_num, enum hws_access_type e_interface_access,
|
|
u32 if_id, enum hws_access_type e_phy_access, u32 phy_id,
|
|
enum hws_ddr_phy e_phy_type, u32 reg_addr,
|
|
u32 data_value);
|
|
int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type e_access, u32 if_id,
|
|
enum mv_ddr_freq memory_freq);
|
|
int ddr3_tip_adjust_dqs(u32 dev_num);
|
|
int ddr3_tip_init_controller(u32 dev_num);
|
|
int ddr3_tip_ext_read(u32 dev_num, u32 if_id, u32 reg_addr,
|
|
u32 num_of_bursts, u32 *addr);
|
|
int ddr3_tip_ext_write(u32 dev_num, u32 if_id, u32 reg_addr,
|
|
u32 num_of_bursts, u32 *addr);
|
|
int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 ui_freq);
|
|
int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq);
|
|
int ddr3_tip_legacy_dynamic_read_leveling(u32 dev_num);
|
|
int ddr3_tip_dynamic_per_bit_read_leveling(u32 dev_num, u32 ui_freq);
|
|
int ddr3_tip_legacy_dynamic_write_leveling(u32 dev_num);
|
|
int ddr3_tip_dynamic_write_leveling(u32 dev_num, int phase_remove);
|
|
int ddr3_tip_dynamic_write_leveling_supp(u32 dev_num);
|
|
int ddr3_tip_static_init_controller(u32 dev_num);
|
|
int ddr3_tip_configure_phy(u32 dev_num);
|
|
int ddr3_tip_load_pattern_to_odpg(u32 dev_num, enum hws_access_type access_type,
|
|
u32 if_id, enum hws_pattern pattern,
|
|
u32 load_addr);
|
|
int ddr3_tip_load_pattern_to_mem(u32 dev_num, enum hws_pattern e_pattern);
|
|
int ddr3_tip_configure_odpg(u32 dev_num, enum hws_access_type access_type,
|
|
u32 if_id, enum hws_dir direction, u32 tx_phases,
|
|
u32 tx_burst_size, u32 rx_phases,
|
|
u32 delay_between_burst, u32 rd_mode, u32 cs_num,
|
|
u32 addr_stress_jump, u32 single_pattern);
|
|
int ddr3_tip_write_mrs_cmd(u32 dev_num, u32 *cs_mask_arr, enum mr_number mr_num, u32 data, u32 mask);
|
|
int ddr3_tip_write_cs_result(u32 dev_num, u32 offset);
|
|
int ddr3_tip_reset_fifo_ptr(u32 dev_num);
|
|
int ddr3_tip_read_adll_value(u32 dev_num,
|
|
u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM],
|
|
u32 reg_addr, u32 mask);
|
|
int ddr3_tip_write_adll_value(u32 dev_num,
|
|
u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM],
|
|
u32 reg_addr);
|
|
int ddr3_tip_tune_training_params(u32 dev_num, struct tune_train_params *params);
|
|
|
|
#endif /* _DDR3_TRAINING_IP_FLOW_H_ */
|